The pad face is wetted where the joint is: the protrusion side,
opposite the component (already read from the owning footprint). The
component-side pad face stays bare - contact_solder_buildups and
tht_joint_buildups no longer coat both outer layers.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
No size-threshold guessing: whether a hole is a via or a THT pad
already comes from KiCad (board.get_vias vs drilled board.get_pads).
Every populated THT pad of the net now carries the complete joint the
contacts got: solder-filled barrel, average-thickness coat over a
pad-diameter disc on the outer layers, and the protruding-lead cone on
the side opposite its owning footprint. The footprint side and the
Do-not-populate flag are read from KiCad (footprint pads store absolute
positions, so owner lookup is an exact (x, y, number) map); DNP pads
stay plating-only with no joint. Contact pads are deduplicated by
barrel center so their cone/coat is never applied twice.
Barrels are now gathered in single-layer runs too: via rings and drill
mouths perforate a lone plane, THT joints stiffen it locally.
ViaLink gains solder_filled + protrusion_side (legacy dumps load with
the old every-THT-pad-filled semantics).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The clipped lead of a soldered THT contact protrudes
THT_LEAD_PROTRUSION_MM (1.5 mm default, 0 disables) out of the hole on
the side opposite the component, and a solder cone wraps it: full
protrusion height at the drill wall, tapering linearly to zero at the
pad edge. Painted as per-cell extra conduction-equivalent copper via
stack.thick_scale - the tall solder column at the wall pulls the joint
vicinity to lead potential (equivalent to extending the barrel wall
vertically), the taper carries the radial spreading. DC-exact additive
conductance; at f > 0 the factor multiplies the skin-corrected sheet
conductance like the via mouths (documented approximation).
The protrusion side is looked up from the owning footprint (pads store
absolute positions; component on F.Cu -> lead tents on B.Cu), with a
logged B.Cu fallback. Dump schema gains protrusion_side and
tht_protrusion_nm (defaults keep older v6 dumps loading).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Selected vias and through-hole pads inject at the drill-wall ring on
every spanned layer (both contact models), not the whole pad face,
so the pad/pour spreading resistance is part of the result. Vias are
now selectable as contacts.
- Soldered THT joints: the hole is modeled solder-filled (core in
parallel with the plating, also for stitching THT barrels) and the
pad face carries an average-thickness solder coat over the modeled
copper (SOLDER_THICKNESS_UM).
- Vias with drills above a configurable threshold (dialog field,
default CAP_MAX_DRILL_MM = 0.5) keep open mouths even with capping
selected - the fab caps only small vias.
- Geometry dump schema v6: electrode barrel fields, cap_max_drill_nm.
- Verified against R = rho/(pi t)*acosh(d/2a) for two circular contacts
on a sheet (+2.6% at h = 0.15 mm, a = 1 mm; uniform model above the
equipotential one as required by the contact bracket).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Follow the swarm-review fixes: chain cells display the true in-trace
current density, teardrop zones conduct, and AC current-density maps
are referenced to the skin-reduced equivalent thickness.
ADAPTIVE_CELLS defaults to True (dialog checkbox stays; untick or
--no-adaptive for the uniform reference grid). With the adaptive grid
the auto cell sizer targets TARGET_CELLS_ADAPTIVE (8M fine cells,
~2x finer h) since unknowns no longer scale with the fine cell count -
memory of the masks/field arrays is the new bound.
The test suite pins ADAPTIVE_CELLS off via an autouse conftest fixture:
the exact-value tests define the uniform reference grid; adaptive tests
opt in per test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two-point fluxes across coarse-fine faces miss the tangential potential
gradient (offset leaf centers), biasing R ~0.5-2% low. After the first
solve, per-leaf gradients are reconstructed by least squares over face
neighbors and the known tangential term g*delta*Gt moves to the
right-hand side of a re-solve (ADAPTIVE_CORRECTION_PASSES, default 1).
The matrix is unchanged, so the new PreparedSolver reuses the LU
factorization / AMG hierarchy across passes; the corrected currents
satisfy KCL exactly, so the power-balance identity, via currents and
part fluxes all use them consistently (edge power = dV * I_corr).
Measured: strip worst case -1.74% -> -0.028% (1 pass); feature-dense
plate end-to-end -1.1% -> -0.011% at 7.2 s vs 25.9 s uniform (5.58M ->
823k unknowns). Tests tightened accordingly plus a passes-knob test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
config.ADAPTIVE_CELLS (dialog checkbox "adaptive cells", off by
default; standalone --adaptive) routes run_solve through
fill_resistance/adaptive.py: per-layer balanced leaf grids where every
non-uniform fine cell (electrodes, 1D chain cells, buildup, via-mouth
thickness map) is pinned at the fine size, leaf faces via the
series-half-cell rule, chain links and barrels re-attached by node id,
connectivity restriction and both contact models on the leaf graph via
solver cores extracted for reuse (_equipotential_core, _uniform_core,
_conductance_params, _barrel_links). All fields (V, |J|, power density)
are computed per leaf and expanded to the fine grid, so plots, summary
and dumps are unchanged.
Element sizes: minimum = the grid cell size itself (auto / dialog /
CELL_UM_OVERRIDE); maximum = ADAPTIVE_MAX_CELL_UM (2 mm default);
ADAPTIVE_GUARD sets the clearance a block needs to grow.
Measured end-to-end (feature-dense 120x120 plate, h=50um): 25.9 s ->
5.4 s, 5.58M -> 823k unknowns, R -1.1%. Accuracy documented honestly:
coarse-fine interfaces carry a first-order tangential flux error
biasing R low by ~0.5-2% depending on geometry (worst on narrow
strips); the earlier assumption that linear fields solve exactly on the
leaf graph was wrong - offset centers across size transitions leave an
unpaired residue. Gradient-corrected interface fluxes remain as phase 4
if tighter accuracy per leaf is needed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Each via now contributes its ring/pad copper (full-thickness disc of
the pad diameter on every spanned layer) and its drill mouth: with
"vias filled + capped" (dialog checkbox, default on, VIAS_CAPPED) the
mouth carries a CAP_PLATING_UM (15 um) thin copper cap on the outer
layers and is an open hole on inner layers; unchecked, mouths are open
everywhere. Mouth coverage is area-weighted per cell (4x4
supersampling) through a per-cell thickness map feeding the existing
harmonic-mean face machinery, so sub-cell mouths perturb the sheet by
their true covered fraction instead of whole cells. Fully swallowed
cells leave the mask; the barrel then attaches through the ring via the
existing pad-footprint search. THT-pad copper and drills stay outside
the model. Ring discs paint before 1D trace chains (chains see them as
regular copper), mouths after wide tracks (drills go through trace
copper). standalone gains --uncapped.
Tests: cap==foil identity against the feature-off reference, strict
R(solid) < R(cap) < R(hole) ordering, ring bridging a fill gap that a
ringless barrel cannot cross, gentle sub-cell perturbation at coarse
grids, and JSON roundtrip of the new fields.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Layer-to-layer the cap (>=15 um plating per fab spec) is parallel to
the annular-ring contact, so it cannot change the DC path. In-plane the
model treats every via mouth as solid layer-thickness copper; the error
is bounded by the dilute-hole correction (~ +2x mouth-area-fraction
locally), partially offset by the unmodeled annular-ring copper, and
typically well under a few percent of total R.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Tracks are now first-class Problem objects (TrackSeg: centerline +
width, dump schema v5), so the wide/narrow decision replays at raster
time: traces at least TRACK_1D_FACTOR (3) cells wide rasterize from
their outline as before; narrower ones mark the cells their centerline
crosses as copper and connect them with explicit conductance links
carrying the trace's TRUE arc length per link - no staircase inflation
for diagonals or arcs, and no discretization error in the trace R, at
any grid size. Links across cells already joined by pour faces are
skipped (union, not sum); chain-only cells get no sheet faces (their
copper is narrower than a cell). Electrodes, via barrels, connectivity
restriction and the skin-effect scaling all work on chain cells
unchanged.
This removes the need to shrink the cell size for thin traces: a 0.2 mm
bridge at 500 um cells now matches its finely-rasterized ground truth
within a few percent (tested), including diagonal and arc traces.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Straight tracks become capsule outline polygons (rectangle +
semicircular caps), arc tracks annular bands with end caps, both
tessellated to the same sagitta tolerance as zone-fill arcs; they merge
into the per-layer copper next to the fills, so rasterization, via
stitching, the solver and the plots handle them unchanged. Trace-only
layers and trace-only nets now qualify as candidates. Dialog checkbox
(on by default, INCLUDE_TRACKS) toggles them per run.
Hole-less polygons (every track outline) now paint the layer mask
directly instead of allocating a full-frame temporary each.
Tests: exact N-cell chain on a rasterized capsule, analytic annular-
sector convergence for an arc trace, capsule/arc-band outline geometry
invariants, collinear-arc degradation, and fill+trace union solve.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Hybrid rasterizer: PIL scanline fill for the bulk, with cells in a
~2 px band around each ring edge re-tested exactly against the
polygon - cell-for-cell identical to the old center-in-polygon pass
(equivalence test added) but O(vertices + cells) instead of
O(vertices x cells). Measured 4.5 s -> 0.11 s at 1.45M cells with
8.8k polygon vertices.
- AMG-preconditioned CG (pyamg, new requirement) above 500k unknowns:
measured 7.0 s vs 15.3 s spsolve at 1.4M unknowns at a fraction of
the memory, R identical to 1e-6; the old Jacobi-CG (kept as fallback
when pyamg is missing) needed tens of minutes there. spsolve stays
the default below 500k where it is exact and fastest.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The intro predated the skin-effect feature; the AC capability was only
mentioned under Model & limits.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- LICENSE.txt (GPL-3.0-or-later), declared in the new PCM v2
metadata.json (validated against the official schema)
- tools/build_package.py builds the registry-layout addon zip in dist/
plus the submission metadata copy with sha256/sizes and a release
download_url derived from the Gitea homepage
- tools/deploy.py: symlink/copy deploy for Linux, macOS and Windows
- 64 px resources/icon.png for the PCM listing
- README: Linux setup/dev commands, packaging and license sections
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
DC/AC resistance, power dissipation, and via/injection-area currents of
copper zone fills. KiCad 10 IPC-API plugin (kicad-python/kipy):
multi-layer via-coupled FDM solver, multi-part terminals via User.1/User.2
marker layers, pads as contacts, uniform-injection and equipotential
contact models, per-foil skin effect, optional solder/copper buildup on
mask openings. 54-case test suite incl. exact analytic references.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
janik
grabowski