1660ab9be6
adds peeling pivot variant that really seems to be the move, along with some pcb tweaks and sticker art
2025-10-20 14:05:28 -04:00
94c26da2a0
this commit reflects rev00b2 pcb
2025-10-08 17:49:28 -04:00
2d628dfa61
tweaks to pcb, adds supportless features to frame, id fid slot
2025-10-07 13:49:29 -04:00
8856da8a3f
few more geometry tweaks, makes peel gear disengage fully
2025-09-23 17:35:56 -04:00
5370261926
rev00b1 pcb, working cad. about to try to test parametric for 16mm
2025-09-16 13:49:06 -04:00
3f9020b964
adds slightly adjusted indexing wheel, interposer tweak
2025-08-19 13:22:32 -04:00
19564c1347
small tweaks
2025-06-26 13:42:32 -04:00
52fcd07a8d
mega push, lots of cad updates, new pcb form factor and schematic rework
2025-06-03 15:46:09 -04:00
3a487f95dc
adding beginning cad of 2u architecture change
2025-03-13 10:20:52 -04:00
30180bba2b
updates asm to show latest frame changes
2025-02-14 16:39:54 -05:00
ae4cd16b60
Makes Frame-# now covers motherboard entirely
...
Supports will be needed!
2025-02-13 17:22:28 -05:00
e2919f54e8
updates frame-8 to have cutout at exit
2025-02-12 16:23:45 -05:00
2933a63461
Bakes feature tree of frames to reduce file size
...
- Mesh cleanup in Onshape was performed to reduce file size of feeder frames
- Design history has been baked out to improve load times and model stability
- These changes should allow the feeder frames to be editable in FreeCAD 1.0 and above.
2025-01-27 18:11:41 -05:00
1eb59a0b15
Adds deeper light diffusor slot
2025-01-24 17:12:12 -05:00
c02c00ea72
Merge branch 'main' of https://github.com/opulo-inc/feeder
2025-01-14 16:20:08 -05:00
4e13a917c9
updates asm to include 1.3.0 changes
2025-01-14 16:19:45 -05:00
fc80e296be
adds frame12 with lfs without adding it normally in commit history
2025-01-14 16:12:45 -05:00
586fc5270d
prep for v1.3.0
2025-01-10 18:33:52 -05:00
5b7a896be5
Removes feeder slots from source
...
Feeder Slots have been moved to the LumenPnP repo
2025-01-10 11:28:02 -05:00
dcc5259ec1
shortens right-angle-n20 shaft to match irl
2025-01-09 15:57:31 -05:00
ffa3a608b1
updates indexing-wheel to brass
2025-01-09 15:57:09 -05:00
d3ebdc5b0e
removes notch from drive-motor-cover
2025-01-09 15:56:46 -05:00
b8fcfb9f7d
removes printable diffuser model
2025-01-09 15:56:33 -05:00
1e6247f857
Adds feeder-compression-spring
...
Adds spring to BOM a
Adds STEP file of spring to the CAD folder
2023-08-02 15:39:42 -04:00
e0a2249308
adding self-threading screws and other 8mm cad optimizations to main from twelve-sixteen branch for v1.1.0 release
2023-08-01 12:44:48 -04:00
5a8f22f9c9
widens slot bracket slightly to make mounting many feeders at once easier
2023-04-19 13:37:41 -04:00
99c66fb02d
opens up the void for the fiducial pcb on the frame
2023-04-10 14:48:34 -04:00
69182b84f1
updates top level assembly
2023-04-09 19:36:01 -04:00
4b4f505098
tightens drive motor cover opening for shaft collar
2023-04-09 19:11:04 -04:00
6c4eb07682
removes friction feature on spool holder for a more perpendicular final position of the thimble
2023-04-09 19:08:31 -04:00
f381991aae
removes padded surface above drive wheel in frame to reduce friction for driving thick paper tape
2023-04-09 19:08:03 -04:00
beaba249a6
makes drive-motor-cover have a recess for the frame thickening in the previous commit
2023-04-09 16:27:01 -04:00
e072111ec8
improves frame for printability, removes chamfer near fiducial void, increases interface between buttons, thickens surface above indexing wheel for better interface between wheel and tape
2023-04-09 16:25:28 -04:00
157f6aca42
adds indexing-wheel cad to reflect pcb
2023-04-09 16:23:38 -04:00
1d6145a329
updates spool arm to having two parts that friction fit together for better printability
2023-04-09 16:23:08 -04:00
d906c2dde7
extends drive motor bracket to to prevent overtightening
2023-04-06 12:32:15 -04:00
a6fbf5ec31
more bugfix
2023-03-24 16:45:18 -04:00
64e5123b03
other little bugfixes
2023-03-24 16:21:10 -04:00
10a2e18563
Cleans up feature tree of frame.FCStd
...
This reverts some unintended feature tree additions that were committed in 30ffbb20aa
2023-03-24 13:00:01 -04:00
30ffbb20aa
Chamfers frame near motor
...
Adds .5mm chamfer near motor cutout for elephants foot mitigation
2023-03-24 12:21:27 -04:00
6616317512
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
43725d327c
removes keying for diffusion pcb from frame
2023-03-19 13:15:49 -04:00
c16b5674bf
adds two mounting holes for drive motor cover
2023-03-19 12:41:22 -04:00
b69ba272c3
adds spacing bump to feeder floor
2023-03-16 09:04:04 -04:00
93874c6baa
removes fillets on spool holder
2023-03-16 09:03:40 -04:00
1751a9f789
adds notch for slot alignment in spool arm
2023-03-16 09:00:43 -04:00
8044a27e67
adds better fid board mounting, opens up pick window
2023-03-16 08:50:52 -04:00
62ba6c3f3e
gets tweaks of spool holder right, for easy fitting into a feeder, and easy spool mounting
2023-03-06 13:42:13 -05:00
92a9864aa0
buttons are really nice here. just a bit of interface with the surface beneath so a great breakaway with support-free printing. buttons cover part of the pcb and feel nice
2023-03-06 09:13:00 -05:00
ec2326c46a
opens up the interface for the slot pcb even more, makes sure the print isnt deformed when the board is mounted
2023-03-06 09:11:31 -05:00
Stephen Hawes