B4L/feeder_mk2
5
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
30ffbb20aa2d66b7eb6a5b8b807825369c1adc70
feeder_mk2/cad
History
Lucian Chapar 30ffbb20aa Chamfers frame near motor 
Adds .5mm chamfer near motor cutout for elephants foot mitigation
2023-03-24 12:21:27 -04:00
..
CHA
adds bom csv and cleans up cha image files
2023-02-08 13:50:29 -05:00
asm.FCStd
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
controllerPCB.FCStd
makes film have a better clearance path for peeling, makes cutout for buttons
2023-01-12 12:12:30 -05:00
diffusion-PCB.FCStd
adds two mounting holes for drive motor cover
2023-03-19 12:41:22 -04:00
diffusor.FCStd
removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad
2022-12-02 14:37:14 -05:00
drive-motor-bracket.FCStd
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
drive-motor-cover.FCStd
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
feeder-floor.FCStd
adds two mounting holes for drive motor cover
2023-03-19 12:41:22 -04:00
feederFloorPCB.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
film-gear-frame.FCStd
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
frame.FCStd
Chamfers frame near motor
2023-03-24 12:21:27 -04:00
indexing-wheel-pcb.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
indexing-wheel.FCStd
adds indexing wheel mechanical model
2023-03-03 16:16:10 -05:00
n20-motor.FCStd
adds in rough beginning of rev06 cad
2022-07-28 14:40:00 -04:00
peel-gear.FCStd
cad tweaks for better fit, worm gear larger id, spool holder smaller post, smaller peel gears for less friction, shorter drive-motor-bracket for an easier time mounting
2023-02-01 09:53:25 -05:00
peel-worm-gear.FCStd
loosens up fit of peel gears for shaft mounting and fit in the frame
2023-02-08 13:47:41 -05:00
photon-8mm-fidPCB.FCStd
adds photon 8mm fid
2023-02-08 13:45:39 -05:00
rail.FCStd
cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap
2022-09-20 14:20:18 -04:00
railLock.FCStd
working cad setup, requires mods to fit worm gear n20 with flush pcb
2022-10-26 09:30:18 -04:00
right-angle-n20.FCStd
adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears
2022-10-26 16:32:18 -04:00
right-angle-n20.step
cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap
2022-09-20 14:20:18 -04:00
shaft-collar.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
spool-holder.FCStd
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
spool.FCStd
working cad setup, requires mods to fit worm gear n20 with flush pcb
2022-10-26 09:30:18 -04:00