B4L/feeder_mk2
5
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
92a9864aa0718200a93d2dd3c3c1f4b68423b59a
feeder_mk2/cad
History
Stephen Hawes 92a9864aa0 buttons are really nice here. just a bit of interface with the surface beneath so a great breakaway with support-free printing. buttons cover part of the pcb and feel nice
2023-03-06 09:13:00 -05:00
..
CHA
adds bom csv and cleans up cha image files
2023-02-08 13:50:29 -05:00
asm.FCStd
updates assembly to include frame updates
2023-03-03 16:16:46 -05:00
controllerPCB.FCStd
makes film have a better clearance path for peeling, makes cutout for buttons
2023-01-12 12:12:30 -05:00
diffusor.FCStd
removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad
2022-12-02 14:37:14 -05:00
drive-motor-bracket.FCStd
cad tweaks for better fit, worm gear larger id, spool holder smaller post, smaller peel gears for less friction, shorter drive-motor-bracket for an easier time mounting
2023-02-01 09:53:25 -05:00
drive-motor-cover.FCStd
cad tweaks for better fit, worm gear larger id, spool holder smaller post, smaller peel gears for less friction, shorter drive-motor-bracket for an easier time mounting
2023-02-01 09:53:25 -05:00
feeder-floor.FCStd
opens up the interface for the slot pcb even more, makes sure the print isnt deformed when the board is mounted
2023-03-06 09:11:31 -05:00
feederFloorPCB.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
film-gear-frame.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
frame.FCStd
buttons are really nice here. just a bit of interface with the surface beneath so a great breakaway with support-free printing. buttons cover part of the pcb and feel nice
2023-03-06 09:13:00 -05:00
indexing-wheel-pcb.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
indexing-wheel.FCStd
adds indexing wheel mechanical model
2023-03-03 16:16:10 -05:00
n20-motor.FCStd
adds in rough beginning of rev06 cad
2022-07-28 14:40:00 -04:00
peel-gear.FCStd
cad tweaks for better fit, worm gear larger id, spool holder smaller post, smaller peel gears for less friction, shorter drive-motor-bracket for an easier time mounting
2023-02-01 09:53:25 -05:00
peel-worm-gear.FCStd
loosens up fit of peel gears for shaft mounting and fit in the frame
2023-02-08 13:47:41 -05:00
photon-8mm-fidPCB.FCStd
adds photon 8mm fid
2023-02-08 13:45:39 -05:00
rail.FCStd
cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap
2022-09-20 14:20:18 -04:00
railLock.FCStd
working cad setup, requires mods to fit worm gear n20 with flush pcb
2022-10-26 09:30:18 -04:00
right-angle-n20.FCStd
adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears
2022-10-26 16:32:18 -04:00
right-angle-n20.step
cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap
2022-09-20 14:20:18 -04:00
shaft-collar.FCStd
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
spool-holder.FCStd
fixes spool holder not fitting in frame, uses good geometry for holding spool on
2023-03-06 09:11:01 -05:00
spool.FCStd
working cad setup, requires mods to fit worm gear n20 with flush pcb
2022-10-26 09:30:18 -04:00