janik
d34d3ade51
Each via now contributes its ring/pad copper (full-thickness disc of the pad diameter on every spanned layer) and its drill mouth: with "vias filled + capped" (dialog checkbox, default on, VIAS_CAPPED) the mouth carries a CAP_PLATING_UM (15 um) thin copper cap on the outer layers and is an open hole on inner layers; unchecked, mouths are open everywhere. Mouth coverage is area-weighted per cell (4x4 supersampling) through a per-cell thickness map feeding the existing harmonic-mean face machinery, so sub-cell mouths perturb the sheet by their true covered fraction instead of whole cells. Fully swallowed cells leave the mask; the barrel then attaches through the ring via the existing pad-footprint search. THT-pad copper and drills stay outside the model. Ring discs paint before 1D trace chains (chains see them as regular copper), mouths after wide tracks (drills go through trace copper). standalone gains --uncapped. Tests: cap==foil identity against the feature-off reference, strict R(solid) < R(cap) < R(hole) ordering, ring bridging a fill gap that a ringless barrel cannot cross, gentle sub-cell perturbation at coarse grids, and JSON roundtrip of the new fields. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
86 lines
4.8 KiB
Python
86 lines
4.8 KiB
Python
"""All tunable constants. v1 has no GUI dialog: edit here, re-run.
|
|
|
|
A future version may read overrides from <project>/fill_res_config.json.
|
|
"""
|
|
|
|
# --- Grid sizing ---
|
|
# Benchmarked on the VOUT+ plane (147x59 mm): R changes < 0.3% from
|
|
# 150 um cells down to 50 um. Accuracy is feature-limited (slots/necks
|
|
# narrower than one cell), not plane-limited - override CELL_UM_OVERRIDE
|
|
# for boards with sub-cell slots.
|
|
TARGET_CELLS = 2_000_000 # auto cell size aims for roughly this many cells
|
|
HARD_MAX_CELLS = 16_000_000 # abort above this (see GridSizeError message)
|
|
MIN_CELL_UM = 25.0 # clamp for auto cell size
|
|
MAX_CELL_UM = 500.0
|
|
CELL_UM_OVERRIDE: float | None = None # force a cell size, bypasses auto (not HARD_MAX)
|
|
MARGIN_CELLS = 2 # empty guard cells around the copper bbox
|
|
|
|
# --- Physics ---
|
|
RHO_CU_OHM_M = 1.68e-8 # copper resistivity at 20 degC
|
|
COPPER_THICKNESS_UM: float | None = None # None -> stackup, fallback 35.0 with warning
|
|
FALLBACK_THICKNESS_UM = 35.0
|
|
TEST_CURRENT_A = 1.0 # default injected current (dialog/CLI-selectable)
|
|
VIA_PLATING_UM = 18.0 # barrel plating thickness (always plated)
|
|
VIAS_CAPPED = True # filled + capped vias (dialog checkbox):
|
|
# outer-layer mouths carry a CAP_PLATING_UM
|
|
# thin copper cap, inner-layer mouths are
|
|
# holes. False = open mouths on all layers.
|
|
# Ring/pad copper of vias is modeled either
|
|
# way; THT-pad copper/drills are not.
|
|
CAP_PLATING_UM = 15.0 # cap plating thickness (fab spec)
|
|
INCLUDE_TH_PADS = True # plated through-hole pads stitch layers too
|
|
SKIN_SIDES = 1 # skin-effect field config: 1 = plane facing a
|
|
# return plane (conservative), 2 = isolated foil
|
|
|
|
# --- Solder / mask-opening buildup ---
|
|
INCLUDE_MASK_BUILDUP = False # OFF by default; dialog-toggleable. Zones on
|
|
# F.Mask/B.Mask = mask openings that collect
|
|
# solder on the pour underneath
|
|
SOLDER_THICKNESS_UM = 50.0 # solder height over opened copper
|
|
SOLDER_RHO_OHM_M = 1.32e-7 # SAC305, ~7.9x copper
|
|
BUILDUP_EXTRA_CU_UM = 0.0 # optional user-added copper (busbar/wire
|
|
# soldered into the opening); dialog-settable
|
|
|
|
# --- Zone / layer selection ---
|
|
INCLUDE_TRACKS = True # the net's traces (straight + arc tracks)
|
|
# conduct together with the zone fills;
|
|
# dialog-toggleable
|
|
TRACK_1D_FACTOR = 3.0 # traces narrower than this many grid cells
|
|
# become exact 1D resistor chains along their
|
|
# centerline instead of rasterized outlines
|
|
# (no discretization error in the trace R;
|
|
# 0 = always rasterize)
|
|
LAYER_HINT: str | None = None # e.g. "F.Cu" to disambiguate candidate fills
|
|
ELECTRODE_POS_LAYER = "User.1" # rectangles on this layer mark V+ contact parts
|
|
ELECTRODE_NEG_LAYER = "User.2" # rectangles on this layer mark V- contact parts
|
|
ALWAYS_REFILL = False # refill zones even if KiCad says they are filled
|
|
|
|
# --- Solver ---
|
|
CONTACT_MODEL = "uniform" # "uniform": conductor pressed on top injects
|
|
# orthogonally with uniform surface density
|
|
# (J ramps across the contact); "equipotential":
|
|
# ideal bonded lug (Dirichlet). The two bracket
|
|
# a real contact: R_equi <= R_real <= R_uniform.
|
|
SPSOLVE_MAX_UNKNOWNS = 500_000 # above this, AMG-preconditioned CG (pyamg;
|
|
# Jacobi-CG if pyamg is missing). Direct is
|
|
# exact and fastest for small grids; measured
|
|
# at 1.4M unknowns: spsolve 13 s / ~3 GB,
|
|
# AMG-CG 6 s at a fraction of the memory
|
|
AMG_TOL = 1e-10 # relative residual of the AMG-CG solve
|
|
CG_TOL = 1e-8 # Jacobi-CG fallback (no pyamg)
|
|
CG_MAXITER = 50_000 # CG iterations are cheap; large grids need many
|
|
|
|
# --- Geometry ---
|
|
ARC_TOL_FRACTION = 0.5 # arc sagitta tolerance as a fraction of cell size
|
|
|
|
# --- Plots / output ---
|
|
CMAP_POTENTIAL = "viridis"
|
|
CMAP_CURRENT = "inferno"
|
|
CMAP_POWER = "magma"
|
|
POWER_DYNAMIC_RANGE = 1e4 # LogNorm span for the power map (power ~ J^2)
|
|
LOG_CURRENT_SCALE = True
|
|
CURRENT_DYNAMIC_RANGE = 1e3 # LogNorm vmin = vmax / this
|
|
DPI = 150
|
|
INTERACTIVE = True # False -> save PNGs only, never open windows
|
|
OUTPUT_DIRNAME = "fill_res_results"
|