Studio: one selected object with pts (a route, an outlined area) shows a
handle on each point and a + in the middle of each side: drag a point to
move it, drag a + to add one there, double-click a point to remove it
(open routes keep 2, outlines 3). Points snap to the grid and onto wall,
fence and road ends, at any angle; one undo step each. Handles keep their
screen size (new viewer callback onView on every redraw) and follow
re-renders and selection. The viewer captures the pointer, so a double-
click targets the drawing: the last point pressed is remembered instead.
Prefab meta `outline`: the prefab draws pts as its outline. Area has it:
Edit corners turns its rectangle into four points, Rectangle again
removes them.
Routes: where a path doubles back, the lane offset puts a point on each
side, so it rounds into a U-turn instead of a diagonal across the lanes.
The streets demo bus now runs east, three quarters round the roundabout
(clockwise, left-hand traffic), down south street, turns and comes back
by the short way, instead of going round the wrong way on its way out.
Tests: Rust 81 (a doubling-back route: each mover once, no sort cycles),
Studio 134 (corners, move, add, remove, undo), web 100.
New stdlib module wildlife.rhai:
- Animals (new palette category): Deer (stag with antlers, does, fawns),
Wild boar, Fox, Elephant (bull with tusks, cow, calf), Rabbits. Low-poly
solids from faces (loft, tube), parts drawn back to front by depth, faces
edged in their own shade (class beast). Herds scatter round a spot, each
animal its own sprite facing about the object's rotation. Grazing
animals switch between two head poses (iso-pose2 groups), elephants curl
their trunks, rabbits hop.
- Birds and Butterflies as flocks: swim() takes a shape (bird, fly, bee);
wings flap out of step. Fish output unchanged.
- Beehives on stands with supers, lids, entrances and bees flying round;
Bush (round, flowering, berries); Flowers (bed in rows or meadow); Rocks;
Log or stump. g-meadow and g-soil ground materials.
- polyline() takes 3D points as documented (antlers).
Theme colours for dark and light, viewer CSS for poses, flapping, hopping.
examples/country: elephants in a paddock with a cut corner, deer at a
forest edge, boar, fox, rabbits, an apiary by a meadow, a pond, a lane,
fence and hedgerow at angles; Country demo in the web Studio and deploy.
MCP guidance, README, SCRIPTING, ROADMAP.
Tests: Rust 78, Studio 122; existing examples draw the same (only the
embedded theme CSS grew).
Object frames turn by any angle (quarter turns stay exact, so scenes along
the axes render byte for byte as before); a box in a turned frame is a
prism with its own corners. Rotation is kept as given (normalised to
0..360), no longer snapped to quarter turns.
Depth sort: sprites whose plan outline is not their box carry their convex
outline; when boxes overlap, an outline edge that separates two sprites
orders them. A long diagonal wall sorts right against both sides.
Joints (line_meet, end_cut, cut_box in util.rhai): where a piece off the
axes is involved, corners are mitred and T-junctions slanted; fences put a
corner post or pillar in its own sprite and mitre stone bases; Y joints let
the lowest id run through. Streets: every end part is a cut e + k*w, so
side streets come in at any angle (slanted sidewalk gaps), two streets meet
in a mitre with seam patches; fixes a curve's outer sidewalk that was
skipped when its kerb and back lines had different point counts.
Studio: runs and drags keep to x/y or snap to 45 degree diagonals, Ctrl
gives any angle; a road run turning 45 degrees gets a 45 degree curve;
Rotation is a number box. Streets demo: a diagonal lane with a hedge.
MCP guidance, SCRIPTING/README/ROADMAP.
Tests: Rust 76, Studio and web checks green.
Roads take sidewalks (none, both, left, right): 12 cm high paving with
kerb faces drawn where they face the viewer. Road curve (radius, angle,
left/right) carries a street round a bend; centre lines are true arcs
when cut and offset, so curve joints are seamless. A road ending on
another road's centre line opens that road's kerb and sidewalk (T
junction); two roads ending at one corner close it. Roundabout: ring
radius and width, one or two lanes, up to four arms with flared kerbs,
splitter islands, give-way lines on the entry side (traffic on the left
or right) and a central island with apron.
Studio: a road run drawn corner by corner gets a curve in each corner
(prefab meta `corner`). Tooltips list the streets each one meets.
Engine: open `polyline` primitive (Prim::Poly open) so dashes run on
round curves. examples/streets and a Streets demo in the web Studio;
MCP guidance, docs. ROADMAP: backlog 5-7 done; multi-select and the
hosted copy marked done.
Tests: Rust 72, Studio 113, web 95.
Joints: line_joint (util.rhai) applies the house-wall rules to fences and
site walls, so pieces never overlap and the depth sort stays clean.
- A corner is closed: the thicker piece (or, if equal, the one along
world x) runs through, and the other stops at its face.
- On a straight run, two pieces share one post.
- At a T, the stem stops at the other piece's face without a post of its
own.
- A fence that ends at a site or house wall stops at the wall's face.
Fence designs (prop style): mesh, wooden boards, steel bars, mesh on a
stone base, cobble wall, and brick wall with pillars. Board, stone and
brick joints are drawn on the face turned to the viewer. Brick pillars
are separate sprites.
Studio: line prefabs (walls, fences, hedges, roads) can be drawn as a
run by clicking corner after corner. Double-click or Enter ends the run,
clicking the first corner closes it, and Backspace drops the last
corner. A run is one undo step. A drag still draws one piece. Corners
and ends snap onto the ends and lines of the pieces they meet, and a
marker shows where the next corner will snap.
The house demo gets a brick front wall with gate pillars and wooden side
fences in place of the old east fence, which ran over the road. Tests
cover every design's corners, Ts, straight runs and wall stops, with no
depth-sort cycles in any rotation, plus site walls. check_studio draws
and closes a fence run, undoes it in one step, snaps a dragged spur,
and picks a design.
House parts (stdlib isokit/house): house_wall drawn along a line, with ends
that adapt at corners, T-junctions and straight runs so no two walls
overlap; window and door that sit on a wall and cut its opening (door
styles panel, glass, double, sliding, opening; swing and hinge by
rotation); floor (boards, tiles, carpet, stone); roof (hip, gable, flat,
optional solar); stairs.
Furniture (stdlib isokit/furniture): chair, sofa / armchair, table with
chairs, desk with monitor and chair, TV, bed, cupboard, bookshelf, kitchen
run, bathtub, shower, toilet, washbasin, plant, rug, floor lamp.
Cut-open levels: on gf / 1f the walls in front of a room are cut low
(rooms are found by their floors), the roof becomes an outline on the
floor, and storeys above are left out. A part's storey comes from z
(storey_h, default 3 m).
Scripting: objects_of, objects_at, objects_on, mount_of, mounted, frame,
to_world, to_local, local_of. Prefab meta: shape (line / rect), mount,
storey.
Studio: drag to draw lines and rectangles (walls, roads, fences, hedges,
floors, areas, buildings, roofs). The Room tool draws a floor plus walls,
without doubling walls that already stand on an edge. Windows and doors
snap onto walls with a hover preview, and they move, turn, copy and
delete with their wall in one undo step. New parts land on the storey
the view shows. Palette categories collapse, and the palette scrolls
apart from the object list.
The MCP instructions explain house building, and list_prefabs shows
sits_on. examples/house is a furnished bungalow; the web Studio gets a
House demo button. Tests: wall corners and junctions, zero depth-sort
cycles in every view, cut levels, and the house demo in every view;
check_studio covers the room / window / door / storey flow, check_web
the House demo.
grabowski