grabowski
7688d03be6
New FreeCAD model docs/cnx_vinyl_parametric_payap_parts.FCStd: the Payap scenario rebuilt from plain Part solids and Draft (arrays, labels, dimensions) on the same Params sheet, no BIM objects, plus: - monopitch roof 10 deg, low eave 7.0 m south, high side 11.4 m north (phase 1 RFQ geometry); gables and the fire wall follow the roof - rooftop PV: 901 x 580 W placeholder modules, ~523 kWp, 17 rows in blocks of four with walkways, 1 m edge strip, 2.5 m clear over the fire wall (estimate) - car canopy (10 bays, 72 modules) and scooter canopy (30 spaces, 22 modules), ~54 kWp, RFQ footprints and heights - module counts and kWp as sheet expressions; ~577 kWp in all FreeCAD 26.3 RC1 does not propagate spreadsheet edits: CNX_apply_Params macro touches the dependents and recomputes; parametric test (factory length, pitch, car bays, walkway) matches the sheet counts. site-candidates.md: roof/PV/canopy section with the export, battery and BOI questions a 577 kWp array raises; mirrors in sustainability.md and scale.md; README layout lines.
20 lines
898 B
Plaintext
20 lines
898 B
Plaintext
# CNX: apply Params
|
|
# FreeCAD 26.3 RC1 does not pass spreadsheet edits on to the objects that read them
|
|
# (a normal recompute only recomputes the sheet). Run this macro after editing Params:
|
|
# it touches every object whose expressions read the sheet, then recomputes; anything
|
|
# further down the chain (arrays, dimensions) follows normally.
|
|
import FreeCAD as App
|
|
|
|
doc = App.ActiveDocument
|
|
sheet = doc.getObject("Params") if doc else None
|
|
if sheet is None:
|
|
App.Console.PrintError("CNX apply Params: the active document has no Params sheet\n")
|
|
else:
|
|
sheet.recompute()
|
|
deps = [o for o in sheet.InList if o is not sheet]
|
|
for o in deps:
|
|
o.touch()
|
|
n = doc.recompute()
|
|
bad = [o.Label for o in doc.Objects if "Invalid" in o.State or "Error" in o.State]
|
|
App.Console.PrintMessage(f"CNX apply Params: {len(deps)} objects read Params, {n} recomputed, errors: {bad[:10]}\n")
|