grabowski
488c9a399c
lamp_export.py writes the per-lamp bundle consumed by the buildfor.life comparison pages: spd.csv (full 380-1050 nm spectrum), tm30.csv (ANSI/IES TM-30-18 hue-bin data for the color vector graphic), and metrics.json (photometric, colorimetric, CRI R1-R15, TM-30 Rf/Rg, electrical, supply settings). - tm30.py computes TM-30-18 via colour-science from the measured spectrum, resampled to a uniform 1 nm grid; validated against CIE FL2 (Rf 70, Rg 86) - Optional built-in PSU control (--mode/--voltage/--frequency/--current), switched on for the measurement and off afterwards, with --settle warm-up and --interval between readings - Readings use the vendor single-shot cycle verified from USB captures: test config -> trigger (8C 0E 02) -> poll -> read -> reset per reading - Also supports --passive and --parse <pcap> sources
11 lines
263 B
TOML
11 lines
263 B
TOML
[project]
|
|
name = "hpcs6500"
|
|
version = "0.1.0"
|
|
description = "Open-source driver and CLI for the HPCS 6500 spectrophotometer / integrating sphere"
|
|
readme = "README.md"
|
|
requires-python = ">=3.11"
|
|
dependencies = [
|
|
"pyserial>=3.5",
|
|
"colour-science>=0.4.4",
|
|
]
|