janik
b62e45a9b4
- Hybrid rasterizer: PIL scanline fill for the bulk, with cells in a ~2 px band around each ring edge re-tested exactly against the polygon - cell-for-cell identical to the old center-in-polygon pass (equivalence test added) but O(vertices + cells) instead of O(vertices x cells). Measured 4.5 s -> 0.11 s at 1.45M cells with 8.8k polygon vertices. - AMG-preconditioned CG (pyamg, new requirement) above 500k unknowns: measured 7.0 s vs 15.3 s spsolve at 1.4M unknowns at a fraction of the memory, R identical to 1e-6; the old Jacobi-CG (kept as fallback when pyamg is missing) needed tens of minutes there. spsolve stays the default below 500k where it is exact and fastest. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
75 lines
4.0 KiB
Python
75 lines
4.0 KiB
Python
"""All tunable constants. v1 has no GUI dialog: edit here, re-run.
|
|
|
|
A future version may read overrides from <project>/fill_res_config.json.
|
|
"""
|
|
|
|
# --- Grid sizing ---
|
|
# Benchmarked on the VOUT+ plane (147x59 mm): R changes < 0.3% from
|
|
# 150 um cells down to 50 um. Accuracy is feature-limited (slots/necks
|
|
# narrower than one cell), not plane-limited - override CELL_UM_OVERRIDE
|
|
# for boards with sub-cell slots.
|
|
TARGET_CELLS = 2_000_000 # auto cell size aims for roughly this many cells
|
|
HARD_MAX_CELLS = 16_000_000 # abort above this (see GridSizeError message)
|
|
MIN_CELL_UM = 25.0 # clamp for auto cell size
|
|
MAX_CELL_UM = 500.0
|
|
CELL_UM_OVERRIDE: float | None = None # force a cell size, bypasses auto (not HARD_MAX)
|
|
MARGIN_CELLS = 2 # empty guard cells around the copper bbox
|
|
|
|
# --- Physics ---
|
|
RHO_CU_OHM_M = 1.68e-8 # copper resistivity at 20 degC
|
|
COPPER_THICKNESS_UM: float | None = None # None -> stackup, fallback 35.0 with warning
|
|
FALLBACK_THICKNESS_UM = 35.0
|
|
TEST_CURRENT_A = 1.0 # default injected current (dialog/CLI-selectable)
|
|
VIA_PLATING_UM = 18.0 # barrel plating thickness (always plated).
|
|
# Capped vs uncapped vias do not change the
|
|
# layer-to-layer DC path: the >=5um cap sits
|
|
# over the hole mouth in parallel with the
|
|
# annular-ring contact, not in series.
|
|
INCLUDE_TH_PADS = True # plated through-hole pads stitch layers too
|
|
SKIN_SIDES = 1 # skin-effect field config: 1 = plane facing a
|
|
# return plane (conservative), 2 = isolated foil
|
|
|
|
# --- Solder / mask-opening buildup ---
|
|
INCLUDE_MASK_BUILDUP = False # OFF by default; dialog-toggleable. Zones on
|
|
# F.Mask/B.Mask = mask openings that collect
|
|
# solder on the pour underneath
|
|
SOLDER_THICKNESS_UM = 50.0 # solder height over opened copper
|
|
SOLDER_RHO_OHM_M = 1.32e-7 # SAC305, ~7.9x copper
|
|
BUILDUP_EXTRA_CU_UM = 0.0 # optional user-added copper (busbar/wire
|
|
# soldered into the opening); dialog-settable
|
|
|
|
# --- Zone / layer selection ---
|
|
LAYER_HINT: str | None = None # e.g. "F.Cu" to disambiguate candidate fills
|
|
ELECTRODE_POS_LAYER = "User.1" # rectangles on this layer mark V+ contact parts
|
|
ELECTRODE_NEG_LAYER = "User.2" # rectangles on this layer mark V- contact parts
|
|
ALWAYS_REFILL = False # refill zones even if KiCad says they are filled
|
|
|
|
# --- Solver ---
|
|
CONTACT_MODEL = "uniform" # "uniform": conductor pressed on top injects
|
|
# orthogonally with uniform surface density
|
|
# (J ramps across the contact); "equipotential":
|
|
# ideal bonded lug (Dirichlet). The two bracket
|
|
# a real contact: R_equi <= R_real <= R_uniform.
|
|
SPSOLVE_MAX_UNKNOWNS = 500_000 # above this, AMG-preconditioned CG (pyamg;
|
|
# Jacobi-CG if pyamg is missing). Direct is
|
|
# exact and fastest for small grids; measured
|
|
# at 1.4M unknowns: spsolve 13 s / ~3 GB,
|
|
# AMG-CG 6 s at a fraction of the memory
|
|
AMG_TOL = 1e-10 # relative residual of the AMG-CG solve
|
|
CG_TOL = 1e-8 # Jacobi-CG fallback (no pyamg)
|
|
CG_MAXITER = 50_000 # CG iterations are cheap; large grids need many
|
|
|
|
# --- Geometry ---
|
|
ARC_TOL_FRACTION = 0.5 # arc sagitta tolerance as a fraction of cell size
|
|
|
|
# --- Plots / output ---
|
|
CMAP_POTENTIAL = "viridis"
|
|
CMAP_CURRENT = "inferno"
|
|
CMAP_POWER = "magma"
|
|
POWER_DYNAMIC_RANGE = 1e4 # LogNorm span for the power map (power ~ J^2)
|
|
LOG_CURRENT_SCALE = True
|
|
CURRENT_DYNAMIC_RANGE = 1e3 # LogNorm vmin = vmax / this
|
|
DPI = 150
|
|
INTERACTIVE = True # False -> save PNGs only, never open windows
|
|
OUTPUT_DIRNAME = "fill_res_results"
|