- Selected vias and through-hole pads inject at the drill-wall ring on
every spanned layer (both contact models), not the whole pad face,
so the pad/pour spreading resistance is part of the result. Vias are
now selectable as contacts.
- Soldered THT joints: the hole is modeled solder-filled (core in
parallel with the plating, also for stitching THT barrels) and the
pad face carries an average-thickness solder coat over the modeled
copper (SOLDER_THICKNESS_UM).
- Vias with drills above a configurable threshold (dialog field,
default CAP_MAX_DRILL_MM = 0.5) keep open mouths even with capping
selected - the fab caps only small vias.
- Geometry dump schema v6: electrode barrel fields, cap_max_drill_nm.
- Verified against R = rho/(pi t)*acosh(d/2a) for two circular contacts
on a sheet (+2.6% at h = 0.15 mm, a = 1 mm; uniform model above the
equipotential one as required by the contact bracket).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
janik