Show a busy window while the solve runs

On OK the dialog closed and nothing appeared until the figures did,
which on a real board is minutes of looking like the plugin did
nothing. Put a small always-on-top window up for that stretch: the
stage now running, elapsed seconds, and Cancel.

Qt only repaints while the event loop runs and the solve owns the
thread, so the window pumps events itself - from inside the CG/AMG
iteration callback, which is where the time actually goes. That is
also where Cancel is noticed. The state is module-level because the
tick happens several frames deep in scipy/pyamg, and threading a
handle through those signatures for a progress bar is not worth it;
it stays inert until start(), so the standalone runner and the tests
are unaffected.

The window covers the figure work too, not just the solve: laying out
labels and writing four PNGs at full DPI is seconds on a real board -
10-15 of them on a large one - and closing before that left the same
silent gap one step later.

fill_resistance/adaptive.py

@@ -34,7 +34,7 @@ import numpy as np
 from scipy import sparse
 from scipy.sparse import csgraph
 
-from . import config, quadtree, skin
+from . import config, progress, quadtree, skin
 from . import solver as sv
 from .errors import ConnectivityError
 from .geometry import Problem
@@ -300,9 +300,11 @@ def run_solve_adaptive(problem: Problem, stack: RasterStack,
     corr = np.zeros(len(edges.a))
     faces = e_axis >= 0
     fa, fb = edges.a[faces], edges.b[faces]
-    for _ in range(max(0, int(config.ADAPTIVE_CORRECTION_PASSES))):
+    passes = max(0, int(config.ADAPTIVE_CORRECTION_PASSES))
+    for p in range(passes):
         if not faces.any():
             break
+        progress.stage(f"correction pass {p + 1}/{passes} ...")
         gx, gy = _leaf_gradients(N, fa, fb, cxg, cyg, Vflat)
         gt = np.where(e_axis[faces] == 0, 0.5 * (gy[fa] + gy[fb]),
                       0.5 * (gx[fa] + gx[fb]))

fill_resistance/main.py

@@ -12,7 +12,7 @@ from __future__ import annotations
 import sys
 import traceback
 
-from . import config, pipeline, report
+from . import config, pipeline, progress, report
 from .errors import CandidateError, UserFacingError
 
 
@@ -89,6 +89,9 @@ def main() -> None:
         if selection is None:
             print("cancelled")
             return
+        # the solve owns the thread from here; without this the plugin
+        # looks like it did nothing until the figures appear
+        progress.start()
 
         if selection.contact1 != "auto":
             for e in es1:
@@ -122,10 +125,14 @@ def main() -> None:
                      freq_hz=selection.freq_hz,
                      contact_model=selection.contact_model,
                      overlay=overlay_cb)
+    except progress.Cancelled:
+        print("cancelled")             # user's own doing: no error figure
     except UserFacingError as e:
         _fail(str(e), outdir)
     except Exception:
         _fail(traceback.format_exc(), outdir)
+    finally:
+        progress.done()                # also on the error paths
 
 
 if __name__ == "__main__":

fill_resistance/pipeline.py

@@ -4,7 +4,7 @@ from __future__ import annotations
 
 from pathlib import Path
 
-from . import config, plots, raster, report, solver
+from . import config, plots, progress, raster, report, solver
 from .errors import UserFacingError
 from .geometry import Problem
 from .solver import Result
@@ -20,8 +20,8 @@ def run(problem: Problem, outdir: Path | None, show: bool = True,
     if i_test <= 0:
         raise UserFacingError(f"Test current must be > 0 A (got {i_test:g}).")
     h = raster.choose_cell_size(problem.copper_bbox(), len(problem.layers))
-    print(f"rasterizing {len(problem.layers)} layer(s) at cell size "
+    progress.stage(f"rasterizing {len(problem.layers)} layer(s) at cell "
-          f"{h / 1000:.1f} um ...")
+                   f"size {h / 1000:.1f} um ...")
     stack = raster.rasterize_stack(problem, h)
     print(f"grid {stack.shape2d[1]}x{stack.shape2d[0]}x{stack.nlayers}, "
           f"{int(stack.masks.sum())} copper cells, {len(problem.vias)} "
@@ -30,7 +30,7 @@ def run(problem: Problem, outdir: Path | None, show: bool = True,
     e1, e2 = raster.electrode_masks(stack, problem)
     parts1, parts2 = raster.electrode_partition(stack, problem)
 
-    print(f"solving @ {i_test:g} A"
+    progress.stage(f"solving @ {i_test:g} A"
                    + (f", {freq_hz:g} Hz" if freq_hz > 0 else " DC") + " ...")
     result = solver.run_solve(problem, stack, e1, e2, i_test, freq_hz,
                               contact_model, parts1, parts2)
@@ -51,6 +51,7 @@ def run(problem: Problem, outdir: Path | None, show: bool = True,
         except Exception as e:
             print(f"overlay push failed: {e}")
 
+    progress.stage("rendering figures ...")
     figs = [
         (plots.fig_raster(stack, e1, e2, problem, result), "1_raster_map"),
         (plots.fig_potential(result, stack, e1, e2, problem), "2_potential"),
@@ -58,5 +59,5 @@ def run(problem: Problem, outdir: Path | None, show: bool = True,
          "3_current_density"),
         (plots.fig_power(result, stack, e1, e2, problem), "4_power_density"),
     ]
-    plots.save_and_show(figs, outdir, show=show)
+    plots.save_and_show(figs, outdir, show=show)   # closes the window itself
     return result

fill_resistance/plots.py

@@ -43,7 +43,7 @@ from matplotlib.gridspec import GridSpec  # noqa: E402
 from matplotlib.patches import Patch  # noqa: E402
 from matplotlib.widgets import CheckButtons  # noqa: E402
 
-from . import config  # noqa: E402
+from . import config, progress  # noqa: E402
 
 _BG = "#f5f3f0"
 _COPPER = "#c98b4e"
@@ -514,11 +514,15 @@ def save_and_show(figs_named: list[tuple], outdir: Path | None,
                   show: bool = True) -> list[Path]:
     """figs_named: [(figure, basename), ...]. Saves first, then shows."""
     saved = []
+    progress.stage("laying out figures ...", echo=False)
     for fig, _ in figs_named:
         _resolve_label_overlaps(fig)
     if outdir is not None:
         outdir.mkdir(parents=True, exist_ok=True)
         for fig, name in figs_named:
+            # full-DPI savefig with tight bounding boxes is seconds per
+            # figure - the progress window has to stay up for it
+            progress.stage(f"saving {name}.png ...", echo=False)
             panel = getattr(fig, "_layer_panel", None)
             if panel is not None:
                 panel.set_visible(False)     # PNGs carry no checkboxes
@@ -531,13 +535,18 @@ def save_and_show(figs_named: list[tuple], outdir: Path | None,
             print(f"saved {p}")
     if show and config.INTERACTIVE:
         if INTERACTIVE_BACKEND:
+            progress.stage("opening the figure windows ...", echo=False)
             for fig, _ in figs_named:
                 _fit_to_screen(fig)
+            progress.done()      # last thing before the figures are up
             _raise_windows()
             plt.show()
         else:
+            progress.done()
             for p in saved:
                 _open_in_viewer(p)
+    else:
+        progress.done()
     plt.close("all")
     return saved
 

fill_resistance/progress.py

@@ -0,0 +1,145 @@
+"""Busy window for the stretch between the dialog closing and the
+figures appearing.
+
+The solve is seconds to minutes on a real board, and until now nothing
+was on screen for it: the dialog vanished on OK and the plugin looked
+like it had done nothing. This puts a small always-on-top window up for
+that stretch - current stage, elapsed time, and a Cancel button.
+
+The state is module-level rather than an object threaded through the
+call chain: the linear solve is where the time actually goes, and it
+calls tick() from inside a scipy/pyamg iteration callback several
+frames deep. Inactive until start() succeeds, so every call is a no-op
+for the standalone runner and the tests.
+
+Qt only repaints when the event loop runs, and the solve owns the
+thread, so tick() pumps events itself. That is also where a click on
+Cancel is noticed - it raises Cancelled at the next tick.
+"""
+from __future__ import annotations
+
+import time
+
+_win = None
+_label = None
+_text = ""
+_t0 = 0.0
+_last = 0.0
+_cancelled = False
+
+TICK_INTERVAL_S = 0.05          # ~20 fps: enough to look alive, cheap
+
+
+class Cancelled(Exception):
+    """The user closed the progress window. Not a failure - the caller
+    reports it like a cancelled dialog, with no error figure."""
+
+
+def start(title: str = "Fill Resistance") -> bool:
+    """Show the window. False (and inert) if Qt is unavailable."""
+    global _win, _label, _t0, _last, _cancelled, _text
+    if _win is not None:
+        return True
+    try:
+        from PySide6.QtCore import Qt
+        from PySide6.QtWidgets import (QApplication, QDialog,
+                                       QDialogButtonBox, QLabel,
+                                       QProgressBar, QVBoxLayout)
+    except Exception:
+        return False
+    try:
+        app = QApplication.instance() or QApplication([])
+        win = QDialog()
+        win.setWindowTitle(title)
+        win.setWindowFlag(Qt.WindowStaysOnTopHint, True)
+        # no close button: closing is Cancel, and Cancel is the only way
+        # to stop a solve that owns the thread
+        win.setWindowFlag(Qt.WindowCloseButtonHint, False)
+
+        label = QLabel("starting ...")
+        bar = QProgressBar()
+        bar.setRange(0, 0)                  # indeterminate: no total to show
+        buttons = QDialogButtonBox(QDialogButtonBox.Cancel)
+
+        layout = QVBoxLayout()
+        layout.addWidget(label)
+        layout.addWidget(bar)
+        layout.addWidget(buttons)
+        win.setLayout(layout)
+
+        buttons.rejected.connect(_cancel)
+        win.rejected.connect(_cancel)
+        win.setMinimumWidth(340)
+        win.show()
+        win.raise_()
+        win.activateWindow()
+        app.processEvents()
+    except Exception:
+        return False
+
+    _win, _label, _t0, _last, _cancelled, _text = win, label, \
+        time.monotonic(), 0.0, False, ""
+    return True
+
+
+def _cancel() -> None:
+    global _cancelled
+    _cancelled = True
+
+
+def stage(text: str, echo: bool = True) -> None:
+    """Name the phase now running. Always repaints - stages are rare.
+
+    echo=False for phases that already print their own line (saving a
+    PNG prints the path), so the window updates without doubling stdout.
+    """
+    global _text
+    _text = text
+    if echo:
+        print(text)
+    if _win is not None:
+        _refresh()
+
+
+def tick() -> None:
+    """Called from inside the solve. Throttled, so it is safe to call
+    every iteration."""
+    global _last
+    if _win is None:
+        return
+    now = time.monotonic()
+    if now - _last < TICK_INTERVAL_S:
+        return
+    _last = now
+    _refresh()
+
+
+def _refresh() -> None:
+    from PySide6.QtWidgets import QApplication
+
+    elapsed = time.monotonic() - _t0
+    if _label is not None:
+        _label.setText(f"{_text}\n{elapsed:.0f} s elapsed")
+    app = QApplication.instance()
+    if app is not None:
+        app.processEvents()
+    if _cancelled:
+        raise Cancelled()
+
+
+def done() -> None:
+    """Take the window down. Idempotent - callers use it in a finally."""
+    global _win, _label, _text, _cancelled
+    win, _win, _label, _text = _win, None, None, ""
+    _cancelled = False
+    if win is None:
+        return
+    try:
+        win.close()
+        win.deleteLater()
+        from PySide6.QtWidgets import QApplication
+        app = QApplication.instance()
+        if app is not None:
+            app.processEvents()
+    except Exception:
+        pass

fill_resistance/solver.py

@@ -45,7 +45,7 @@ from scipy import sparse
 from scipy.sparse import csgraph
 from scipy.sparse import linalg as sla
 
-from . import config, skin
+from . import config, progress, skin
 from .errors import ConnectivityError, ElectrodeError, SolverError
 from .geometry import Problem, slot_distance
 from .raster import RasterStack, electrodes_touch
@@ -375,12 +375,14 @@ class PreparedSolver:
 
     def solve(self, b: np.ndarray) -> tuple[np.ndarray, SolveInfo]:
         if self._lu is not None:
+            progress.tick()      # direct solve: one shot, no iterations
             return self._lu.solve(b), SolveInfo(method="spsolve",
                                                 n_unknowns=self.n)
         if self._ml is not None:
             residuals: list[float] = []
             x = self._ml.solve(b, tol=config.AMG_TOL, maxiter=300,
-                               accel="cg", residuals=residuals)
+                               accel="cg", residuals=residuals,
+                               callback=lambda _: progress.tick())
             res = float(np.linalg.norm(b - self._A @ x)
                         / max(np.linalg.norm(b), 1e-300))
             if not np.isfinite(res) or res > 1e-6:
@@ -404,7 +406,7 @@ def _solve_amg(A: sparse.csr_matrix, b: np.ndarray) -> tuple[np.ndarray, SolveIn
     ml = pyamg.smoothed_aggregation_solver(A.tocsr(), max_coarse=500)
     residuals: list[float] = []
     x = ml.solve(b, tol=config.AMG_TOL, maxiter=300, accel="cg",
-                 residuals=residuals)
+                 residuals=residuals, callback=lambda _: progress.tick())
     res = float(np.linalg.norm(b - A @ x) / max(np.linalg.norm(b), 1e-300))
     if not np.isfinite(res) or res > 1e-6:
         raise SolverError(
@@ -428,6 +430,7 @@ def _solve_cg_jacobi(A: sparse.csr_matrix, b: np.ndarray) -> tuple[np.ndarray, S
     def count(_):
         nonlocal iters
         iters += 1
+        progress.tick()
 
     try:
         x, code = sla.cg(A, b, M=M, rtol=config.CG_TOL,

fill_resistance/standalone.py

@@ -13,7 +13,7 @@ import argparse
 import sys
 from pathlib import Path
 
-from . import config, pipeline
+from . import config, pipeline, progress
 from .errors import UserFacingError
 from .geometry import load_problem
 from .skin import parse_frequency
@@ -51,6 +51,9 @@ def main(argv=None) -> int:
     ap.add_argument("--force-iterative", action="store_true",
                     help="use the iterative solver (AMG-CG, or Jacobi-CG "
                          "without pyamg) regardless of problem size")
+    ap.add_argument("--progress", action="store_true",
+                    help="show the busy window during the solve, as the "
+                         "KiCad plugin does (needs a GUI)")
     ap.add_argument("--adaptive", action=argparse.BooleanOptionalAction,
                     default=None,
                     help="adaptive quadtree grid (coarse plane interiors); "
@@ -86,13 +89,20 @@ def main(argv=None) -> int:
             return 1
 
     outdir = args.out if args.out is not None else args.dump.parent
+    if args.progress:
+        progress.start()
     try:
         pipeline.run(problem, outdir, show=not args.no_show,
                      i_test=args.current, freq_hz=args.freq,
                      contact_model=args.contact_model)
+    except progress.Cancelled:
+        print("cancelled")
+        return 1
     except UserFacingError as e:
         print(f"ERROR: {e}", file=sys.stderr)
         return 1
+    finally:
+        progress.done()
     return 0