isokit/crates/isokit-script/stdlib/util.rhai

// isokit/util: helpers shared by the prefabs.

/// Floor index of a level id: "gf" -> 0, "1f" -> 1, "2f" -> 2; anything else
/// (roof, site, "") -> -1, which means "closed buildings".
fn floor_of(lv) {
    if lv == "gf" { return 0; }
    if lv.len() >= 2 && lv.ends_with("f") {
        let k = lv.sub_string(0, lv.len() - 1);
        let digits = true;
        for c in k.chars() { if !"0123456789".contains(c) { digits = false; } }
        if digits { return parse_int(k); }
    }
    -1
}

/// Walls of a cut-open room over the rectangle [x0, y0, x1, y1] from height z:
/// walls facing the viewer are cut low (lo), the others stay high (hi), so
/// the room can be seen into from every rotation. Each wall is its own sprite
/// for the depth sort. skip: list of walls to leave out (0 S, 1 N, 2 W, 3 E).
fn cut_walls(x0, y0, x1, y1, z, lo, hi, t, mat, skip) {
    let W = [
        [x0, y0, x1, y0 + t, 0, -1],
        [x0, y1 - t, x1, y1, 0, 1],
        [x0, y0 + t, x0 + t, y1 - t, -1, 0],
        [x1 - t, y0 + t, x1, y1 - t, 1, 0],
    ];
    for i in 0..4 {
        if skip.contains(i) { continue; }
        let w = W[i];
        let h = if vis(w[4], w[5]) { lo } else { hi };
        sprite().box(w[0], w[1], w[2], w[3], z, z + h, mat, #{ top: "cut" });
    }
}

/// Windows spread along the face a -> b (length L) for one storey:
/// returns [[u0, u1, z0, z1], ...]; leaves a gap around u = gap (or -1).
fn win_list(L, z0, sill, height, width, spacing, gap) {
    let out = [];
    let n = ((L - 1.0) / spacing).floor().to_int();
    if n < 1 { return out; }
    let start = (L - (n - 1) * spacing) / 2.0;
    for i in 0..n {
        let u = start + i * spacing;
        if gap >= 0.0 && (u - gap).abs() < width + 0.6 { continue; }
        out.push([u - width / 2.0, u + width / 2.0, z0 + sill, z0 + sill + height]);
    }
    out
}

/// Animate the next drawing of sprite s along (dx, dy) metres of its frame:
/// call before drawing, then s.end(). Only animates when the motion runs
/// along the axis the depth sort compares second; returns whether it does.
fn drive(dx, dy, dur, delay) {
    let ok = if dx != 0.0 { along_x() } else { !along_x() };
    if !ok { this.begin(""); return false; }
    let v = dv(dx, dy, 0.0);
    this.begin("a drive", `--dx:${v[0]}px;--dy:${v[1]}px;animation-duration:${dur}s;animation-delay:-${delay}s`);
    true
}

/// True when a piece turned by rot runs along world x (rot 0 or 180).
fn along_world_x(rot) { ((rot / 90.0).round().to_int() % 2) == 0 }

/// Half the thickness of a fence or wall piece: what the joints keep apart.
fn line_ht(w) {
    if w.type == "fence" { fence_ht(w.p.style) } else { w.p.t / 2.0 }
}

/// How line piece o (a fence or wall along its local x, length p.w) meets
/// other pieces at its end e (-1 or 1): #{ ext, post }, how far it reaches
/// past the end and whether it draws the end post. `same`: the types it joins
/// with; `stops`: types it ends against. The rules of the house walls, so
/// pieces never overlap (the depth sort needs them apart):
/// - alone it reaches half its thickness past the end, flush with its post;
/// - on a straight run the lower piece runs through and draws the shared
///   post, the other starts at that post;
/// - at a corner the thicker piece (equal: the one along world x) runs
///   through, the other stops at its face;
/// - at a T it stops at the other's face without an end post (the other
///   piece has its own there); against a `stops` piece it keeps its post.
fn line_joint(o, e, same, stops) {
    let ht = line_ht(o);
    let p = to_world(e * o.p.w / 2.0, 0.0);
    let c = to_world(0.0, 0.0);
    let q = to_world(e * (o.p.w / 2.0 - 0.05), 0.0);
    let ox = along_world_x(o.rot);
    let face = 0.0;
    let has_face = false;
    let face_post = false;
    let run = #{};
    let corner = [];
    for w in objects_on(same + stops, p[0], p[1], 0.5) {
        if w.id == o.id || (w.z - o.z).abs() > 0.5 { continue; }
        let wt = line_ht(w);
        if w.v.abs() > wt + 0.02 { continue; }
        let at_end = (w.u.abs() - w.p.w / 2.0).abs() < 0.02;
        let wx = along_world_x(w.rot);
        let side = if local_of(w, q[0], q[1])[1] >= w.v { 1.0 } else { -1.0 };
        let stop = -(wt - side * w.v);
        if !same.contains(w.type) || (!at_end && wx != ox) {
            face = stop;
            has_face = true;
            face_post = !same.contains(w.type);
        } else if wx == ox {
            if at_end { run = #{ lower: if ox { c[0] < w.x } else { c[1] < w.y }, wt: wt }; }
        } else {
            corner.push(#{ wt: wt, stop: stop });
        }
    }
    if has_face { return #{ ext: face, post: face_post }; }
    if run.len() > 0 {
        return if run.lower { #{ ext: ht, post: true } } else { #{ ext: -run.wt, post: false } };
    }
    // two pieces end here from both sides: a straight run this one meets as a T
    if corner.len() > 1 { return #{ ext: corner[0].stop, post: false }; }
    if corner.len() == 1 {
        let k = corner[0];
        let mine = ht > k.wt + 0.005 || ((ht - k.wt).abs() <= 0.005 && ox);
        return if mine { #{ ext: ht, post: true } } else { #{ ext: k.stop, post: false } };
    }
    #{ ext: ht, post: true }
}