Stephen Hawes 6616317512 pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

..

CHA

adds bom csv and cleans up cha image files

2023-02-08 13:50:29 -05:00

asm.FCStd

pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

controllerPCB.FCStd

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

diffusion-PCB.FCStd

adds two mounting holes for drive motor cover

2023-03-19 12:41:22 -04:00

diffusor.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

drive-motor-bracket.FCStd

pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

drive-motor-cover.FCStd

pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

feeder-floor.FCStd

adds two mounting holes for drive motor cover

2023-03-19 12:41:22 -04:00

feederFloorPCB.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

film-gear-frame.FCStd

pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

frame.FCStd

pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

indexing-wheel-pcb.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

indexing-wheel.FCStd

adds indexing wheel mechanical model

2023-03-03 16:16:10 -05:00

n20-motor.FCStd

adds in rough beginning of rev06 cad

2022-07-28 14:40:00 -04:00

peel-gear.FCStd

cad tweaks for better fit, worm gear larger id, spool holder smaller post, smaller peel gears for less friction, shorter drive-motor-bracket for an easier time mounting

2023-02-01 09:53:25 -05:00

peel-worm-gear.FCStd

loosens up fit of peel gears for shaft mounting and fit in the frame

2023-02-08 13:47:41 -05:00

photon-8mm-fidPCB.FCStd

adds photon 8mm fid

2023-02-08 13:45:39 -05:00

rail.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

railLock.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

right-angle-n20.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

right-angle-n20.step

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

shaft-collar.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

spool-holder.FCStd

pcbs and updated cad pushed up

2023-03-23 11:44:13 -04:00

spool.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00