feeder_mk2

adds wireviz yaml files for feeder floor harness

2023-01-17 18:50:44 -05:00

.DS_Store

represents rev07 feeder controller, rev03 indexing wheel, rev03 feeder floor. also checks in lots of cad work for feeder design and feeder floor design

2022-08-23 12:11:06 -04:00

asm.FCStd

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

asm.FCStd1

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

controllerPCB.FCStd

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

controllerPCB.FCStd1

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

diffusor.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

diffusor.FCStd1

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

drive-motor-bracket.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

drive-motor-bracket.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

drive-motor-cover.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

drive-motor-cover.FCStd1

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

feeder-floor.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

feeder-floor.FCStd1

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

feederFloorPCB.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

feederFloorPCB.FCStd1

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

film-gear-frame.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

film-gear-frame.FCStd1

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

frame.FCStd

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

frame.FCStd1

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

indexing-wheel-pcb.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

indexing-wheel-pcb.FCStd1

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

n20-motor.FCStd

adds in rough beginning of rev06 cad

2022-07-28 14:40:00 -04:00

peel-gear.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

peel-gear.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

peel-worm-gear.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

peel-worm-gear.FCStd1

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

rail.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

railLock.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

railLock.FCStd1

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

right-angle-n20.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

right-angle-n20.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

right-angle-n20.step

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

shaft-collar.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

spool-holder.FCStd

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

spool-holder.FCStd1

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

spool.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00