feeder_mk2

CHA

represents rev07 feeder controller, rev03 indexing wheel, rev03 feeder floor. also checks in lots of cad work for feeder design and feeder floor design

2022-08-23 12:11:06 -04:00

.DS_Store

represents rev07 feeder controller, rev03 indexing wheel, rev03 feeder floor. also checks in lots of cad work for feeder design and feeder floor design

2022-08-23 12:11:06 -04:00

asm.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

asm.FCStd1

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

controllerPCB.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

controllerPCB.FCStd1

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

diffusor.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

diffusor.FCStd1

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

drive-motor-bracket.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

drive-motor-bracket.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

drive-motor-cover.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

feeder-floor.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

feeder-floor.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

feederFloorPCB.FCStd

represents rev08 of feeder controller, rev04 of feeder floor. cad still needs some tweaks.

2022-10-06 16:03:50 -04:00

feederFloorPCB.FCStd1

represents rev08 of feeder controller, rev04 of feeder floor. cad still needs some tweaks.

2022-10-06 16:03:50 -04:00

film-gear-frame.FCStd

tweaks to film gear frame to make the gears easier to pop in

2022-10-27 18:26:18 -04:00

film-gear-frame.FCStd1

makes drive motor plug easier to plug into pcb, gives drive motor cable more space to exist in the frame

2022-10-28 13:16:24 -04:00

frame.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

frame.FCStd1

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

indexing-wheel-pcb.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

n20-motor.FCStd

adds in rough beginning of rev06 cad

2022-07-28 14:40:00 -04:00

peel-gear.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

peel-gear.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

peel-worm-gear.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

rail.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

railLock.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

railLock.FCStd1

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

right-angle-n20.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

right-angle-n20.FCStd1

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

right-angle-n20.step

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

spool-holder.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

spool-holder.FCStd1

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00

spool.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00