Lucian Chapar e6d8015699 repo cleanup

2025-01-13 16:28:03 -05:00

..

CHA

adds bom csv and cleans up cha image files

2023-02-08 13:50:29 -05:00

FDM

repo cleanup

2025-01-13 16:28:03 -05:00

asm.FCStd

adding self-threading screws and other 8mm cad optimizations to main from twelve-sixteen branch for v1.1.0 release

2023-08-01 12:44:48 -04:00

controllerPCB.FCStd

makes film have a better clearance path for peeling, makes cutout for buttons

2023-01-12 12:12:30 -05:00

diffusion-PCB.FCStd

adds two mounting holes for drive motor cover

2023-03-19 12:41:22 -04:00

diffusor.FCStd

removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad

2022-12-02 14:37:14 -05:00

feeder-compression-spring.step

Adds feeder-compression-spring

2023-08-02 15:39:42 -04:00

indexing-wheel-pcb.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

indexing-wheel.FCStd

adds indexing-wheel cad to reflect pcb

2023-04-09 16:23:38 -04:00

n20-motor.FCStd

adds in rough beginning of rev06 cad

2022-07-28 14:40:00 -04:00

photon-8mm-fidPCB.FCStd

adds photon 8mm fid

2023-02-08 13:45:39 -05:00

rail.FCStd

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

right-angle-n20.FCStd

adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears

2022-10-26 16:32:18 -04:00

right-angle-n20.step

cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap

2022-09-20 14:20:18 -04:00

shaft-collar.FCStd

cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb

2022-12-09 09:50:03 -05:00

slotPCB.FCStd

other little bugfixes

2023-03-24 16:21:10 -04:00

spool.FCStd

working cad setup, requires mods to fit worm gear n20 with flush pcb

2022-10-26 09:30:18 -04:00