Gonçalo Pereira
|
f72b464060
|
Update to KiCAD 8
|
2024-04-23 18:17:11 +01:00 |
|
Gonçalo Pereira
|
cdb099adfd
|
Update to KiCAD 8
|
2024-04-23 07:48:10 +01:00 |
|
Stephen Hawes
|
f93ddf28f0
|
adds annotations to many sections of the schematic
|
2023-05-17 14:22:33 -04:00 |
|
Stephen Hawes
|
ce0884c780
|
makes schematic page larger, rearranges components for readability
|
2023-05-17 14:12:14 -04:00 |
|
Stephen Hawes
|
d77f599cce
|
adds dedicated symbol for push buttons. adds them to the board
|
2023-05-17 13:40:47 -04:00 |
|
Stephen Hawes
|
af06af9a1b
|
fixes #19. adds X and Y caps on RS485 bus.
|
2023-05-17 12:59:16 -04:00 |
|
Stephen Hawes
|
b06d74ba60
|
fixes #16. adds cap to reset line for EMI hardening
|
2023-05-17 12:05:46 -04:00 |
|
Stephen Hawes
|
d3189ef4d0
|
helps address #13. motor driver decoupling caps match the DRV8837s recommended values in the datasheet. adds dedicated cap for the rs485 transceiver. improves routing from motor driver caps to power pads
|
2023-05-17 11:53:09 -04:00 |
|
Stephen Hawes
|
ce71b40a86
|
fixes #9. marks LED_RGBA_ALT as DNP, adds custom symbol for MHS110FRGBCT LED
|
2023-05-17 11:24:14 -04:00 |
|
Stephen Hawes
|
749bfe5bb2
|
small routing tweaks
|
2023-05-15 12:08:43 -04:00 |
|
Stephen Hawes
|
4d84a8e0f6
|
adds inductor inline with the 24v rail to limit inrush current
|
2023-05-11 14:41:13 -04:00 |
|
Stephen Hawes
|
3f644291de
|
fixes paste for DNP parts, makes some paste interfaces more accurate or wider for more structural integrity
|
2023-03-15 11:23:00 -04:00 |
|
Stephen Hawes
|
efb66fe491
|
fixes flipped references, remakes circular keepouts for b.cu copper pour for countersinking
|
2023-03-06 11:40:14 -05:00 |
|
Stephen Hawes
|
a66ba957ed
|
adds footprint for locking header for UART, adds it to pcb
|
2023-02-09 11:57:16 -05:00 |
|
Stephen Hawes
|
3ea01fbc81
|
starting on controller rev10, fixes motor spinning while in bootloader mode by pulling motor enable low with a pulldown resistor, and enabling with PA2 in firmware
|
2023-02-09 10:45:54 -05:00 |
|
Stephen Hawes
|
985822d0b3
|
adds some LCSC part numbers to the schematic
|
2023-02-07 14:05:11 -05:00 |
|
Stephen Hawes
|
3de54c689d
|
added datasheet for main rgb led
|
2022-12-09 10:57:28 -05:00 |
|
Stephen Hawes
|
9486f7e7be
|
schematic cleanup
|
2022-12-09 10:49:38 -05:00 |
|
Stephen Hawes
|
23a94d06bd
|
this commit represents rev09 of the controller, rev04 of the indexing wheel, and rev05 of the feeder floor
|
2022-12-09 09:48:28 -05:00 |
|
Stephen Hawes
|
63ebb10ad8
|
adds 10k pullup to reset
|
2022-12-08 10:14:23 -05:00 |
|
Stephen Hawes
|
ab78e1af2d
|
adds second footprint for rgbled, adds testpoints
|
2022-12-06 10:46:47 -05:00 |
|
Stephen Hawes
|
72d4928337
|
removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad
|
2022-12-02 14:37:14 -05:00 |
|
Stephen Hawes
|
3258dbd22f
|
represents rev08 of feeder controller, rev04 of feeder floor. cad still needs some tweaks.
|
2022-10-06 16:03:50 -04:00 |
|
Stephen Hawes
|
4583e2b04f
|
moved feeder motherboard geometry so spring fingers come straight down onto pads
|
2022-10-04 15:05:47 -04:00 |
|
Stephen Hawes
|
ed79c04cdd
|
represents rev07 feeder controller, rev03 indexing wheel, rev03 feeder floor. also checks in lots of cad work for feeder design and feeder floor design
|
2022-08-23 12:11:06 -04:00 |
|
Stephen Hawes
|
32e2dc15f8
|
rev06 pcb
|
2022-07-28 14:40:46 -04:00 |
|