 janik
|
a69055b0d4
|
added current monitoring to pcb, many code fixes for the protocol / feed control logic, completely reworked diagnostic tool
|
2026-03-30 17:46:52 +07:00 |
|
|
janik
|
33426570bb
|
revised layout for mechanical purposes
|
2026-03-27 17:36:13 +07:00 |
|
|
janik
|
eddce0bc68
|
bugfixes
|
2026-02-27 17:31:42 +07:00 |
|
|
janik
|
87bd6ef982
|
code finished for testing, added serial monitor and debug output
|
2026-02-05 16:13:07 +07:00 |
|
|
janik
|
410e807804
|
added pcbart, smaller changes
|
2025-12-17 17:46:40 +07:00 |
|
|
janik
|
16697586e4
|
started layout
|
2025-10-29 17:54:15 +07:00 |
|
|
janik
|
5c85a477d2
|
started rework
|
2025-10-28 17:20:43 +07:00 |
|
|
Stephen Hawes
|
77fd4812aa
|
adds interposer board and first pass of patch to feeder controller to bias RE and DE pins of rs485 transceiver
|
2025-07-02 14:38:38 -04:00 |
|
|
Stephen Hawes
|
3f644291de
|
fixes paste for DNP parts, makes some paste interfaces more accurate or wider for more structural integrity
|
2023-03-15 11:23:00 -04:00 |
|
|
Stephen Hawes
|
efb66fe491
|
fixes flipped references, remakes circular keepouts for b.cu copper pour for countersinking
|
2023-03-06 11:40:14 -05:00 |
|
|
Stephen Hawes
|
a66ba957ed
|
adds footprint for locking header for UART, adds it to pcb
|
2023-02-09 11:57:16 -05:00 |
|
|
Stephen Hawes
|
3ea01fbc81
|
starting on controller rev10, fixes motor spinning while in bootloader mode by pulling motor enable low with a pulldown resistor, and enabling with PA2 in firmware
|
2023-02-09 10:45:54 -05:00 |
|
|
Stephen Hawes
|
985822d0b3
|
adds some LCSC part numbers to the schematic
|
2023-02-07 14:05:11 -05:00 |
|
|
Stephen Hawes
|
3de54c689d
|
added datasheet for main rgb led
|
2022-12-09 10:57:28 -05:00 |
|
|
Stephen Hawes
|
9486f7e7be
|
schematic cleanup
|
2022-12-09 10:49:38 -05:00 |
|
|
Stephen Hawes
|
23a94d06bd
|
this commit represents rev09 of the controller, rev04 of the indexing wheel, and rev05 of the feeder floor
|
2022-12-09 09:48:28 -05:00 |
|
|
Stephen Hawes
|
63ebb10ad8
|
adds 10k pullup to reset
|
2022-12-08 10:14:23 -05:00 |
|
|
Stephen Hawes
|
ab78e1af2d
|
adds second footprint for rgbled, adds testpoints
|
2022-12-06 10:46:47 -05:00 |
|
|
Stephen Hawes
|
72d4928337
|
removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad
|
2022-12-02 14:37:14 -05:00 |
|
|
Stephen Hawes
|
3258dbd22f
|
represents rev08 of feeder controller, rev04 of feeder floor. cad still needs some tweaks.
|
2022-10-06 16:03:50 -04:00 |
|
|
Stephen Hawes
|
4583e2b04f
|
moved feeder motherboard geometry so spring fingers come straight down onto pads
|
2022-10-04 15:05:47 -04:00 |
|
|
Stephen Hawes
|
ed79c04cdd
|
represents rev07 feeder controller, rev03 indexing wheel, rev03 feeder floor. also checks in lots of cad work for feeder design and feeder floor design
|
2022-08-23 12:11:06 -04:00 |
|
|
Stephen Hawes
|
32e2dc15f8
|
rev06 pcb
|
2022-07-28 14:40:46 -04:00 |
|