30180bba2b
updates asm to show latest frame changes
2025-02-14 16:39:54 -05:00
2933a63461
Bakes feature tree of frames to reduce file size
...
- Mesh cleanup in Onshape was performed to reduce file size of feeder frames
- Design history has been baked out to improve load times and model stability
- These changes should allow the feeder frames to be editable in FreeCAD 1.0 and above.
2025-01-27 18:11:41 -05:00
4e13a917c9
updates asm to include 1.3.0 changes
2025-01-14 16:19:45 -05:00
586fc5270d
prep for v1.3.0
2025-01-10 18:33:52 -05:00
e0a2249308
adding self-threading screws and other 8mm cad optimizations to main from twelve-sixteen branch for v1.1.0 release
2023-08-01 12:44:48 -04:00
69182b84f1
updates top level assembly
2023-04-09 19:36:01 -04:00
6616317512
pcbs and updated cad pushed up
2023-03-23 11:44:13 -04:00
c16b5674bf
adds two mounting holes for drive motor cover
2023-03-19 12:41:22 -04:00
90df5c2771
updates assembly to include frame updates
2023-03-03 16:16:46 -05:00
aca9c35f2c
updates asm with bolts and fid pcb
2023-02-08 13:45:53 -05:00
a32820a702
cad tweaks for better fit, worm gear larger id, spool holder smaller post, smaller peel gears for less friction, shorter drive-motor-bracket for an easier time mounting
2023-02-01 09:53:25 -05:00
268e266d86
makes film have a better clearance path for peeling, makes cutout for buttons
2023-01-12 12:12:30 -05:00
998eb5b7cb
added drive motor bracket mounting screws
2022-12-09 10:49:53 -05:00
a07f55b2cc
cad tweaks for rev09 feeder, including first pass at printed buttons, properly recessed nuts in peel gear frame, tweaked feeder floor for new feeder floor pcb
2022-12-09 09:50:03 -05:00
72d4928337
removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad
2022-12-02 14:37:14 -05:00
585bdb8637
adds accurate model of worm gear n20, redid cable routing for drive motor, opened up recess for drive motor to fit new type, shifted drive motor bracket closer to the gearbox, guides tape so it doesnt collide with buttons, feeder floor chamfered correctly for easy insertion, guides film so it stays centered in gears
2022-10-26 16:32:18 -04:00
7641f90c9a
working cad setup, requires mods to fit worm gear n20 with flush pcb
2022-10-26 09:30:18 -04:00
3258dbd22f
represents rev08 of feeder controller, rev04 of feeder floor. cad still needs some tweaks.
2022-10-06 16:03:50 -04:00
c89d551814
got feeder floor print updated to match new angles
2022-10-04 16:57:27 -04:00
4583e2b04f
moved feeder motherboard geometry so spring fingers come straight down onto pads
2022-10-04 15:05:47 -04:00
5b0719495a
cleaned up the repo! moved firmware out, cleaned up cad, deleted extra crap
2022-09-20 14:20:18 -04:00
Lucian Chapar