 Stephen Hawes
|
d77f599cce
|
adds dedicated symbol for push buttons. adds them to the board
|
2023-05-17 13:40:47 -04:00 |
|
|
Stephen Hawes
|
af06af9a1b
|
fixes #19. adds X and Y caps on RS485 bus.
|
2023-05-17 12:59:16 -04:00 |
|
|
Stephen Hawes
|
b06d74ba60
|
fixes #16. adds cap to reset line for EMI hardening
|
2023-05-17 12:05:46 -04:00 |
|
|
Stephen Hawes
|
d3189ef4d0
|
helps address #13. motor driver decoupling caps match the DRV8837s recommended values in the datasheet. adds dedicated cap for the rs485 transceiver. improves routing from motor driver caps to power pads
|
2023-05-17 11:53:09 -04:00 |
|
|
Stephen Hawes
|
a2f9e1068f
|
fixes #14. removes vias from all pads. updates STM32 QFN footprint to not have any paste layer for stencil export
|
2023-05-17 11:02:24 -04:00 |
|
|
Stephen Hawes
|
4a230d6c4d
|
fixes #22. adds reasonable default design rule constraints. circular keepouts are already present for the countersink, and they're much bigger than the max diameter of the countersink
|
2023-05-17 10:33:53 -04:00 |
|
|
Stephen Hawes
|
749bfe5bb2
|
small routing tweaks
|
2023-05-15 12:08:43 -04:00 |
|
|
Stephen Hawes
|
4d84a8e0f6
|
adds inductor inline with the 24v rail to limit inrush current
|
2023-05-11 14:41:13 -04:00 |
|
|
Stephen Hawes
|
0064d7556f
|
represents rev11. adjusts uart frictionfit to have a tighter interface
|
2023-03-15 17:11:28 -04:00 |
|
|
Stephen Hawes
|
4c22a74a95
|
bumps text silk to be centered
|
2023-03-15 11:24:20 -04:00 |
|
|
Stephen Hawes
|
3f644291de
|
fixes paste for DNP parts, makes some paste interfaces more accurate or wider for more structural integrity
|
2023-03-15 11:23:00 -04:00 |
|
|
Stephen Hawes
|
7c04d4294c
|
adds hash to silk
|
2023-03-15 10:55:26 -04:00 |
|
|
Stephen Hawes
|
89a9317c93
|
updates silk to reflect rev11
|
2023-03-15 10:49:24 -04:00 |
|
|
Stephen Hawes
|
de2dcf852f
|
removes a few errant silkscreen artifacts from pulsar, adjusts for oshw logo
|
2023-03-15 09:29:38 -04:00 |
|
|
Thea Flowers
|
330f1d2c40
|
Trim PCB artwork
|
2023-03-14 18:26:25 -04:00 |
|
|
Thea Flowers
|
e31a44c7cd
|
Add PCB artwork
|
2023-03-14 01:09:38 -04:00 |
|
|
Stephen Hawes
|
312031c954
|
adds silk updates for UART port, adds open hardware logo, adds keepout for the version sticker
|
2023-03-07 20:44:12 -05:00 |
|
|
Stephen Hawes
|
823af7d4ce
|
this commit represents rev10 feeder controllers
|
2023-03-06 13:41:44 -05:00 |
|
|
Stephen Hawes
|
09c43efde8
|
pulls pour zone borders within kikit's boundary
|
2023-03-06 12:34:47 -05:00 |
|
|
Stephen Hawes
|
efb66fe491
|
fixes flipped references, remakes circular keepouts for b.cu copper pour for countersinking
|
2023-03-06 11:40:14 -05:00 |
|
|
Stephen Hawes
|
ec995acac3
|
flips board upside down for panelization
|
2023-03-06 11:19:54 -05:00 |
|
|
Stephen Hawes
|
f35be51c27
|
cleans up drawing layers
|
2023-03-06 11:18:57 -05:00 |
|
|
Stephen Hawes
|
37316d0ea9
|
fixes deformed outline
|
2023-03-06 11:01:15 -05:00 |
|
|
Stephen Hawes
|
f18097ea1e
|
adds kikit annotations for panelization
|
2023-03-06 10:50:58 -05:00 |
|
|
Stephen Hawes
|
9ed5414136
|
updates controller pcb to have copper keepouts around the countersinks, shifts the buttons to a more centered position
|
2023-03-03 16:15:41 -05:00 |
|
|
Stephen Hawes
|
a66ba957ed
|
adds footprint for locking header for UART, adds it to pcb
|
2023-02-09 11:57:16 -05:00 |
|
|
Stephen Hawes
|
3ea01fbc81
|
starting on controller rev10, fixes motor spinning while in bootloader mode by pulling motor enable low with a pulldown resistor, and enabling with PA2 in firmware
|
2023-02-09 10:45:54 -05:00 |
|
|
Stephen Hawes
|
23a94d06bd
|
this commit represents rev09 of the controller, rev04 of the indexing wheel, and rev05 of the feeder floor
|
2022-12-09 09:48:28 -05:00 |
|
|
Stephen Hawes
|
63ebb10ad8
|
adds 10k pullup to reset
|
2022-12-08 10:14:23 -05:00 |
|
|
Stephen Hawes
|
ab78e1af2d
|
adds second footprint for rgbled, adds testpoints
|
2022-12-06 10:46:47 -05:00 |
|
|
Stephen Hawes
|
72d4928337
|
removes all the indicator leds in exchange for a single rgb. adds diffusion and printed buttons in cad
|
2022-12-02 14:37:14 -05:00 |
|
|
Stephen Hawes
|
3258dbd22f
|
represents rev08 of feeder controller, rev04 of feeder floor. cad still needs some tweaks.
|
2022-10-06 16:03:50 -04:00 |
|
|
Stephen Hawes
|
c89d551814
|
got feeder floor print updated to match new angles
|
2022-10-04 16:57:27 -04:00 |
|
|
Stephen Hawes
|
4583e2b04f
|
moved feeder motherboard geometry so spring fingers come straight down onto pads
|
2022-10-04 15:05:47 -04:00 |
|
|
Stephen Hawes
|
ed79c04cdd
|
represents rev07 feeder controller, rev03 indexing wheel, rev03 feeder floor. also checks in lots of cad work for feeder design and feeder floor design
|
2022-08-23 12:11:06 -04:00 |
|
|
Stephen Hawes
|
32e2dc15f8
|
rev06 pcb
|
2022-07-28 14:40:46 -04:00 |
|