1660ab9be6
adds peeling pivot variant that really seems to be the move, along with some pcb tweaks and sticker art
2025-10-20 14:05:28 -04:00
94c26da2a0
this commit reflects rev00b2 pcb
2025-10-08 17:49:28 -04:00
2d628dfa61
tweaks to pcb, adds supportless features to frame, id fid slot
2025-10-07 13:49:29 -04:00
8856da8a3f
few more geometry tweaks, makes peel gear disengage fully
2025-09-23 17:35:56 -04:00
5370261926
rev00b1 pcb, working cad. about to try to test parametric for 16mm
2025-09-16 13:49:06 -04:00
52fcd07a8d
mega push, lots of cad updates, new pcb form factor and schematic rework
2025-06-03 15:46:09 -04:00
3a487f95dc
adding beginning cad of 2u architecture change
2025-03-13 10:20:52 -04:00
ae4cd16b60
Makes Frame-# now covers motherboard entirely
...
Supports will be needed!
2025-02-13 17:22:28 -05:00
e2919f54e8
updates frame-8 to have cutout at exit
2025-02-12 16:23:45 -05:00
2933a63461
Bakes feature tree of frames to reduce file size
...
- Mesh cleanup in Onshape was performed to reduce file size of feeder frames
- Design history has been baked out to improve load times and model stability
- These changes should allow the feeder frames to be editable in FreeCAD 1.0 and above.
2025-01-27 18:11:41 -05:00
1eb59a0b15
Adds deeper light diffusor slot
2025-01-24 17:12:12 -05:00
c02c00ea72
Merge branch 'main' of https://github.com/opulo-inc/feeder
2025-01-14 16:20:08 -05:00
4e13a917c9
updates asm to include 1.3.0 changes
2025-01-14 16:19:45 -05:00
fc80e296be
adds frame12 with lfs without adding it normally in commit history
2025-01-14 16:12:45 -05:00
586fc5270d
prep for v1.3.0
2025-01-10 18:33:52 -05:00
5b7a896be5
Removes feeder slots from source
...
Feeder Slots have been moved to the LumenPnP repo
2025-01-10 11:28:02 -05:00
d3ebdc5b0e
removes notch from drive-motor-cover
2025-01-09 15:56:46 -05:00
e0a2249308
adding self-threading screws and other 8mm cad optimizations to main from twelve-sixteen branch for v1.1.0 release
2023-08-01 12:44:48 -04:00
5a8f22f9c9
widens slot bracket slightly to make mounting many feeders at once easier
2023-04-19 13:37:41 -04:00
99c66fb02d
opens up the void for the fiducial pcb on the frame
2023-04-10 14:48:34 -04:00
4b4f505098
tightens drive motor cover opening for shaft collar
2023-04-09 19:11:04 -04:00
6c4eb07682
removes friction feature on spool holder for a more perpendicular final position of the thimble
2023-04-09 19:08:31 -04:00
f381991aae
removes padded surface above drive wheel in frame to reduce friction for driving thick paper tape
2023-04-09 19:08:03 -04:00
beaba249a6
makes drive-motor-cover have a recess for the frame thickening in the previous commit
2023-04-09 16:27:01 -04:00
e072111ec8
improves frame for printability, removes chamfer near fiducial void, increases interface between buttons, thickens surface above indexing wheel for better interface between wheel and tape
2023-04-09 16:25:28 -04:00
1d6145a329
updates spool arm to having two parts that friction fit together for better printability
2023-04-09 16:23:08 -04:00
d906c2dde7
extends drive motor bracket to to prevent overtightening
2023-04-06 12:32:15 -04:00
a6fbf5ec31
more bugfix
2023-03-24 16:45:18 -04:00
64e5123b03
other little bugfixes
2023-03-24 16:21:10 -04:00
Stephen Hawes