started layout

This commit is contained in:
janik
2025-10-29 17:54:15 +07:00
parent 5c85a477d2
commit 16697586e4
116 changed files with 189537 additions and 3765 deletions

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,226 @@
/**
******************************************************************************
* @file stm32c0xx.h
* @author MCD Application Team
* @brief CMSIS STM32C0xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32C0xx device used in the target application
* - To use or not the peripherals drivers in application code(i.e.
* code will be based on direct access to peripherals registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* Copyright (c) 2022 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32c0xx
* @{
*/
#ifndef STM32C0xx_H
#define STM32C0xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32C0)
#define STM32C0
#endif /* STM32C0 */
/* Uncomment the line below according to the target STM32C0 device used in your
application
*/
#if !defined (STM32C011xx) && !defined (STM32C031xx) \
&& !defined (STM32C051xx) && !defined (STM32C071xx) \
&& !defined (STM32C091xx) && !defined (STM32C092xx)
/* #define STM32C011xx */ /*!< STM32C011xx Devices */
/* #define STM32C031xx */ /*!< STM32C031xx Devices */
/* #define STM32C051xx */ /*!< STM32C051xx Devices */
/* #define STM32C071xx */ /*!< STM32C071xx Devices */
/* #define STM32C091xx */ /*!< STM32C091xx Devices */
/* #define STM32C092xx */ /*!< STM32C092xx Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number V1.0.0
*/
#define __STM32C0_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32C0_CMSIS_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */
#define __STM32C0_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
#define __STM32C0_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32C0_CMSIS_VERSION ((__STM32C0_CMSIS_VERSION_MAIN << 24)\
|(__STM32C0_CMSIS_VERSION_SUB1 << 16)\
|(__STM32C0_CMSIS_VERSION_SUB2 << 8 )\
|(__STM32C0_CMSIS_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32C011xx)
#include "stm32c011xx.h"
#elif defined(STM32C031xx)
#include "stm32c031xx.h"
#elif defined(STM32C051xx)
#include "stm32c051xx.h"
#elif defined(STM32C071xx)
#include "stm32c071xx.h"
#elif defined(STM32C091xx)
#include "stm32c091xx.h"
#elif defined(STM32C092xx)
#include "stm32c092xx.h"
#else
#error "Please select first the target STM32C0xx device used in your application (in stm32c0xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
SUCCESS = 0,
ERROR = !SUCCESS
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
/* Use of interrupt control for register exclusive access */
/* Atomic 32-bit register access macro to set one or several bits */
#define ATOMIC_SET_BIT(REG, BIT) \
do { \
uint32_t primask; \
primask = __get_PRIMASK(); \
__set_PRIMASK(1); \
SET_BIT((REG), (BIT)); \
__set_PRIMASK(primask); \
} while(0)
/* Atomic 32-bit register access macro to clear one or several bits */
#define ATOMIC_CLEAR_BIT(REG, BIT) \
do { \
uint32_t primask; \
primask = __get_PRIMASK(); \
__set_PRIMASK(1); \
CLEAR_BIT((REG), (BIT)); \
__set_PRIMASK(primask); \
} while(0)
/* Atomic 32-bit register access macro to clear and set one or several bits */
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
do { \
uint32_t primask; \
primask = __get_PRIMASK(); \
__set_PRIMASK(1); \
MODIFY_REG((REG), (CLEARMSK), (SETMASK)); \
__set_PRIMASK(primask); \
} while(0)
/* Atomic 16-bit register access macro to set one or several bits */
#define ATOMIC_SETH_BIT(REG, BIT) ATOMIC_SET_BIT(REG, BIT) \
/* Atomic 16-bit register access macro to clear one or several bits */
#define ATOMIC_CLEARH_BIT(REG, BIT) ATOMIC_CLEAR_BIT(REG, BIT) \
/* Atomic 16-bit register access macro to clear and set one or several bits */
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32c0xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* STM32C0xx_H */
/**
* @}
*/
/**
* @}
*/

View File

@@ -0,0 +1,105 @@
/**
******************************************************************************
* @file system_stm32c0xx.h
* @author MCD Application Team
* @brief CMSIS Cortex-M0+ Device System Source File for STM32C0xx devices.
******************************************************************************
* @attention
*
* Copyright (c) 2022 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32c0xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef SYSTEM_STM32C0XX_H
#define SYSTEM_STM32C0XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32C0xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32C0xx_System_Exported_types
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
extern const uint32_t AHBPrescTable[16]; /*!< AHB prescalers table values */
extern const uint32_t APBPrescTable[8]; /*!< APB prescalers table values */
/**
* @}
*/
/** @addtogroup STM32C0xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32C0xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32C0xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*SYSTEM_STM32C0XX_H */
/**
* @}
*/
/**
* @}
*/

View File

@@ -0,0 +1,6 @@
This software component is provided to you as part of a software package and
applicable license terms are in the Package_license file. If you received this
software component outside of a package or without applicable license terms,
the terms of the Apache-2.0 license shall apply.
You may obtain a copy of the Apache-2.0 at:
https://opensource.org/licenses/Apache-2.0