grabowski
4c44b39e0c
- README: vendor sections for Agnew Analog (lathe), Plating Power/Digital Matrix (galvanics), Sibert (stamper prep), Stamper Discs (bridge stamper service), Pheenix Alpha (automated presses) - docs/suppliers/equipment-suppliers.md: full needs list and supplier map across all nine areas of the production chain
6.9 KiB
Equipment Needs and Supplier Map
Working list of everything the factory needs per production step, with the suppliers identified so far. Compiled 2026-07-17 from vendor research and the Newbilt planning documents. All pricing is quote-on-request unless a figure is given; figures are snapshots, not commitments.
1. Mastering and Lathe Cutting
What we need:
- Disk mastering lathe
- Stereo cutter head
- Cutting (drive) amplifiers matched to the head
- Mastering / transfer console and mastering chain (EQ, limiting, elliptical EQ)
- Preview / pitch-and-depth automation solution
- Vacuum system for platter hold-down and swarf (chip) suction
- Groove inspection microscope and reference playback chain for QC
- Low-vibration, temperature-controlled room
- Consumables: lacquer blanks, cutting styli
Suppliers identified:
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Agnew Analog | Chalkis, Greece | Type 612 lathe, Type 602 cutter head, Type 607 stylus machine, tube electronics | Bespoke, long build times; turnkey or components; info@agnewanalog.com |
Open: cutter amps, console, preview automation, lacquer blank supply (e.g. MDC/Public Record type), styli supply.
2. Silvering and Electroforming (Galvanics)
What we need:
- Lacquer cleaning / degrease station
- Silvering station (conductive silver layer)
- Nickel pre-plate station (low-stress strike)
- Electroforming cells (father, mother, stamper generations)
- Electro-clean / passivation station
- Clean room with controlled access, ventilation, fume extraction/scrubbing
- Closed-loop rinse water treatment and metal recovery (zero-discharge requirement; e.g. wastewater evaporator, reference: Gotta Groove Records model)
- Decontamination procedures and PPE program (nickel salts and silver nitrate hazards)
Suppliers identified:
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Plating Power / Digital Matrix Corp. | Farmingdale, NY, USA | VLSS silvering, VLPP pre-plate, VLFP 2/4/6-cell electroforming, EC-1000 passivation, control rings | No water treatment or metal recovery in their scope; no SE-Asia distributor; alex.greenspan@digmatrix.com |
Open: industrial water-treatment vendor for the zero-discharge system; clean-room design/build contractor; fume scrubbing.
3. Stamper Preparation
What we need:
- Stamper center punch
- Stamper back-finishing machine
- Stamper trimming/forming (coining) machine
Suppliers identified:
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Sibert Instruments | Hampshire, UK | VSP punch, VSF back-finisher, VSC coiner | Spec PDFs on request; confirm no overlap with press-integrated forming before buying the VSC; sales@sibert.co.uk, Ian Locke |
4. Stamper Service (bridge / overflow, until in-house galvanics runs)
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Stamper Discs | Sheffield, UK | 1-step and 3-step stampers from lacquer/DMM, 7"/10"/12", fits Newbilt/Toolex/Viryl molds; brokers lacquer cutting via EU partners | Ships 30+ countries, no documented Asia customers yet; get written turnaround SLA; peter@stamperdiscs.com |
5. Pressing
What we need (target fleet: 50% fully automated, 50% semi-automatic):
- Semi-automatic press line: extruder, presses, hydraulic aggregate, molds (12" 140/180 g, 7" and 10" insert sets), trimmer
- Fully automated press line: automatic presses incl. extruders, molds
- Steam generator (~400 kg/h for the semi-auto Duplex alone; grows with the automated line), local sourcing planned
- Cooling water system (~250 kW for the semi-auto Duplex alone; closed loop), local sourcing planned
- Workshop compressor / compressed air supply
- PVC grinder (recycling loop)
- Record separator plates, buffer spindles
Suppliers identified:
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Newbilt machinery GmbH | Alsdorf, Germany | Single 2.1 system (VEX 50 extruder, HRP 12 press ~150 t, semi-auto), Duplex expansion, molds, Vario trimmer, grinder, label punch | 2024 quote 200,549.50 EUR incl. freight, expired, needs re-quote; contact via Hans-Juergen Helm |
| Pheenix Alpha | Solna, Sweden | AD12 fully automatic press (24-26 s cycle, ~140 records/h, 1 operator per 4 presses); AD12 Manual semi-auto | Direct Toolex Alpha successor; possible single-vendor option for both fleet halves; andreas.runsten@pheenixalpha.com |
Open: decision between Newbilt semi-auto + Pheenix automatic vs. single vendor; local steam-generator and chiller suppliers in Thailand.
6. Finishing and Packaging
What we need:
- Label dry oven (Newbilt quote lists France Etuves XU 112 as example)
- Shrink wrap machine (example: Minipack-Torre Replay 55)
- 7" center label punch / dinker
- Folded paper cartons: jackets and sleeves
- Printing for labels and packaging
Suppliers identified:
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Local packaging manufacturers | Chiang Mai region, Thailand | Folded paper cartons (jackets, sleeves) | Collaboration planned, partners not yet identified |
7. PVC Compound
Preference: local (Thai/regional) sourcing if quality meets record specifications; European suppliers as fallback. Feed mix runs 80% virgin, 20% recycled in-house regrind.
Suppliers identified (2021 contact list, needs refresh; full contacts in
210519_Suppliers of PVC for vinyl record production.pdf):
| Supplier | Country |
|---|---|
| P.A.T. Engineering B.V. | Netherlands |
| Dugdale Limited | UK |
| CAF srl | Italy |
| INEOS Compounds Aycliffe | UK |
| RESINOPLAST | France |
| TPC Plastics | USA |
| Polymer-Chemie GmbH | Germany |
| PCW GmbH | Germany |
Open: identify and qualify Thai/regional PVC compound producers.
8. Utilities and Site (customer-supplied around the machines)
- Solar PV installation (large; sizing open until site selection)
- Steam generation (electric, biomass, or solar-thermal assist under evaluation; Deepgrooves NL runs presses on wood-fired biomass boilers as a precedent)
- Water treatment for boiler feed and closed-loop cooling
- Compressed air generation
- Hydraulic oil (~200 L, ISO VG 32/46 HLP per DIN 51524-2, per Newbilt spec)
- Clean rooms, ventilation, decontamination infrastructure for galvanics
- Fire protection, exhaust work benches, PPE stock
Suppliers: all open, to be sourced locally in Thailand where possible.
9. Services and Expertise
| Supplier | Location | Offering | Notes |
|---|---|---|---|
| Kevin Da Costa | UK | Vinyl manufacturing consultancy: factory layout, installation, training, process optimization | GBP 10k-20k packages / GBP 450 per day; credentials self-stated, references needed |
| Newbilt service | Germany | Installation, commissioning, training beyond the included 5 days | 2024 rate card: 84 EUR/h on-site plus surcharges and travel |
| buildfor.life | Thailand | Project consulting | Supporting |
Open: mastering/cutting engineer training, galvanics process expertise (hardest skill to hire), local contractors for building and utilities.