New cnx.router.accessPorts option pins a port untagged to one VLAN via
bridge PVID/EgressUntagged; convention is the last copper port as an
always-available mgmt recovery port. gw-cnx-1 port roles: enp1s0 WAN,
enp2s0 trunk, enp3s0 temporary DHCP uplink into the old OPNsense LAN
(back to trunk at cutover), enp4s0 untagged mgmt.
The newedge.house site adopts the 10.1.<vlanId>.0/24 convention: mgmt 10
(the old untagged LAN), lan 20, iot 40, voip 50, dmz 60, unit1-5 110-150.
PPPoE is untagged at this site. Static leases move to a new per-VLAN
dhcp.reservations option rendered into Kea host reservations.
Per-gateway download/upload/ping from the hourly librespeed runs, with
each link's 7-day median overlaid so the WANSpeedDegraded alert
condition is visible at a glance. Label-driven — new sites appear
automatically once scraped.
iperf3 serves throughput tests from every VLAN and the mesh; an hourly
librespeed run feeds speedtest_* metrics through node_exporter's textfile
collector, and vmalert flags download rates below half the link's own
7-day median so ISP degradation surfaces without per-site thresholds.
cnx.router.proxy serves <service>.<site><n>.cnx.network with a real Let's
Encrypt wildcard obtained via a gateway-scoped TSIG key against ns1; Blocky
resolves the names to the router's LAN address, so they exist only
internally. First user: Omada UI on gw-cnx-1 (omada.cnx1.cnx.network).
Reusable cnx.router.* module for the Topton 1U boxes replacing OPNsense:
PPPoE WAN (optionally VLAN-tagged, AIS: 10, secret credentials incl.
username), VLAN-filtering bridge, nftables NAT/firewall with MSS clamp,
Kea DHCP with per-VLAN lease time, Blocky DNS, DHCPv6-PD, CrowdSec with
the ZeroTier mesh whitelisted, optional Omada controller, ZFS disk.
Fleet baseline rides along: admins sops group is now derived for every
machine in clan.nix (secrets encrypt to it from the first vars generate)
and time sync is chrony everywhere instead of systemd-timesyncd.
Grafana 13 externalised its core data sources; nixpkgs no longer bundles
the Elasticsearch datasource, so every DMARC panel failed with "Plugin not
registered". Load the official Grafana-signed elasticsearch plugin via
declarativePlugins, pin the dmarc-ag/dmarc-fo datasource UIDs (Grafana 11+
resolves datasource template variables by UID, not name), and clear stale
uid-less records left by an earlier deploy.
Bump clan-core and nixos-mailserver to 26.05 (NixOS 26.05) and adapt to
the breaking changes surfaced by nix flake check:
- mesh-hosts/clan.nix: read the new shared, instance-scoped zerotier vars
(zerotier-ip-<machine>-zerotier, zerotier-network-zerotier); admit
external members via the controller's native allowedIds.
- monitoring/server.nix: Grafana lost its built-in secret_key default;
mint one via a clan generator and pass it with $__file{}.
- dns/authoritative.nix: services.resolved.extraConfig removed -> settings.
- mail.nix: SNM cert API change (x509.useACMEHost + acme extraDomainNames)
and accounts/dkim option renames.
- docs: mesh runbook updated for the new var paths and allowedIds.
Deliver cnx.email DMARC aggregate/forensic reports to a dedicated dmarc@cnx.email
mailbox on mx1 and analyze them with parsedmarc on control, storing parsed
reports in a local loopback Elasticsearch and visualizing via the auto-provisioned
Grafana dashboard. parsedmarc fetches the mailbox over IMAPS across the mesh
(mx1.cnx.email pinned to its mesh address so TLS still validates), using a shared
mail-dmarc-cred clan var so mx1's mailserver and control see the same password.
web01 terminates TLS for grafana.cnx.network and proxies to Grafana on
control over the mesh. Caddy serves a *.cnx.network wildcard cert obtained
via ACME DNS-01, using a dedicated acme_web01 TSIG key scoped on ns1 to
_acme-challenge on the cnx.network zone only. Ports 80/443 are the only
public exposure (80 just redirects); admin and the backend ride ZeroTier.
Also reload Caddy on cert renewal for both web01 and mx1, since both
reference the cert via explicit tls file paths and would otherwise keep
serving a stale cert after a silent renewal.
A mail.cnx.email CNAME (-> mx1.cnx.email) lets clients (Thunderbird etc.)
use a friendly hostname for submission/IMAP. To avoid a TLS name
mismatch the cert now carries mail.cnx.email as a SAN, so the acme_mx1
key is authorized to write _acme-challenge.mail too. The MX still points
at mx1.cnx.email and --reuse-key keeps the DANE TLSA digest valid across
the re-issue.
Pure formatting (nixfmt/prettier/yamlfmt); no behavior change. These
files predate the current treefmt config and were failing nix flake
check; reformatting them makes the gate green again.
mx1 runs Simple NixOS Mailserver (Postfix/Dovecot/Rspamd/OpenDKIM) for
cnx.email. The TLS cert is obtained via ACME DNS-01 using a dedicated,
scoped TSIG key (acme_mx1) that ns1 authorizes for only
_acme-challenge.mx1 and _acme-challenge.mta-sts on the cnx.email zone, so
the credential can write nothing else. Mailbox passwords are auto-minted
by a clan vars generator (four-word passphrase + number).
DANE TLSA (3 1 1) is published for _25._tcp.mx1; --reuse-key keeps the
key digest stable across renewals. MTA-STS is enforced via a Caddy vhost
serving the policy on :443 from the same cert (mta-sts SAN). Firewall
opens 25/587/465/143/993/443; 80 stays closed.
- Register mx1 in the inventory and as a direct-SSH `internet` host; give it
a static public IPv6 (2a01:4ff:2f0:1963::1).
- Point the cnx.email MX (plus SPF/DMARC) at mx1 and add its A record.
- Bring mx1 into monitoring: import exporters, add it to the mesh map and the
node scrape job so its host metrics and journald reach control.
- Add a clan-mx1 Hetzner firewall: inbound SMTP + ZeroTier + ICMP, no public
SSH (admin rides the mesh like the other hosts). 587/465/993 held for now.
- Extract per-host public IPv4/IPv6 into modules/hosts.nix, consumed by
clan.nix's internet hosts and each machine's cnx.staticIPv6, so each address
is declared once instead of being duplicated across configs.
- docs: add mx1 to the machines table.
VictoriaLogs, like the VM scraper, is IPv4-only by default: ":9428" binds
0.0.0.0 only, so ns1/ns2 pushing journald over the IPv6 mesh got "connection
refused" while control's own loopback (v4) upload worked. Add -enableTCP6 so it
binds [::] (dual-stack), matching the flag already used for the scraper.
Also simplify the systemd-journal-upload override to just startLimitIntervalSec=0
(retry forever / self-heal) and drop the SuccessExitStatus masking: a persistent
sink failure should stay loud rather than be hidden behind a green deploy.
The uploader exits when VictoriaLogs is unreachable. Upstream already sets
Restart=always/RestartSec=3sec, but the default start-rate limit lets the unit
give up permanently and trip switch-to-configuration when the sink is briefly
down. Disable the limit (startLimitIntervalSec=0) so logging stays best-effort
and never wedges a host or a deploy.
control runs VictoriaLogs (:9428, 30d, mesh-scoped) with a matching
Grafana datasource. Each host ships journald via systemd's own
journald.upload to the /insert/journald endpoint -- no extra agent.
control uploads over loopback so its logs survive a mesh outage; ns1
and ns2 push over the mesh.
DNSResolutionProbeFailed and DNSSECProbeFailed fire when an SOA or
DNSKEY probe to a public nameserver address stays down for 5m. The CNX
DNS dashboard gains a "DNS probes (outside-in)" row: per-zone/server
status table, probe success, and probe latency.
control runs blackbox_exporter on loopback, probing each nameserver's
public v4+v6 address for every zone: SOA (zone served) and DNSKEY (still
signed, since blackbox has no DO-bit option). Probe definitions are
shared between the exporter config and the VictoriaMetrics scrape jobs
so they can't drift. Verified live against ns1/ns2 over v4 and v6.
kurogeek
Berwn