chore: update deployed documentation

Assembly/c64psu-position-bottom_pos.csv

@@ -0,0 +1,26 @@
+Ref,Val,Package,PosX,PosY,Rot,Side
+"C2","10uF","C_0402_1005Metric",157.7620,-62.6872,180.0000,bottom
+"C12","10uF","C_1210_3225Metric",160.4772,-81.2292,0.0000,bottom
+"C13","10uF","C_1210_3225Metric",160.4772,-78.0288,0.0000,bottom
+"C17","10uF","C_1210_3225Metric",160.2232,-91.2876,180.0000,bottom
+"C21","10uF","C_0402_1005Metric",189.3316,-82.0192,-90.0000,bottom
+"C22","100nF","C_0402_1005Metric",190.3476,-81.7880,90.0000,bottom
+"C23","10uF","C_1206_3216Metric",199.8200,-48.6700,-90.0000,bottom
+"C24","100nF","C_0402_1005Metric",157.7340,-63.6524,0.0000,bottom
+"C25","10uF","C_1206_3216Metric",172.7217,-83.8137,-90.0000,bottom
+"C42","100nF 50V","C_0402_1005Metric",201.5744,-48.6664,-90.0000,bottom
+"C43","10uF","C_1206_3216Metric",175.2537,-83.7622,-90.0000,bottom
+"C44","10uF","C_1210_3225Metric",160.1724,-94.6912,180.0000,bottom
+"D2","SMAJ15CA","D_SMA",196.6468,-48.7868,90.0000,bottom
+"JP3","Jumper_2_Open","PinHeader_1x02_P2.54mm_Vertical",215.4428,-65.4862,0.0000,bottom
+"JP4","Jumper_2_Open","PinHeader_1x02_P2.54mm_Vertical",210.1088,-65.5370,0.0000,bottom
+"R2","20k","R_0603_1608Metric",198.3740,-41.5036,-45.0000,bottom
+"R22","4k7","R_0603_1608Metric",193.9036,-83.0072,90.0000,bottom
+"R24","4k7","R_0603_1608Metric",193.9036,-86.0552,-90.0000,bottom
+"R25","470","R_0603_1608Metric",196.1896,-83.7692,0.0000,bottom
+"R26","205","R_0603_1608Metric",196.9516,-81.4710,90.0000,bottom
+"R27","470","R_0603_1608Metric",191.0588,-87.0204,180.0000,bottom
+"R28","20k","R_0603_1608Metric",198.6788,-54.4576,-135.0000,bottom
+"U1","INA180A2","SOT-23-5",158.3436,-60.1472,-90.0000,bottom
+"U3","LM321","SOT-23-5",190.9064,-84.5312,180.0000,bottom
+"U7","LM4041CIM3X-1.2/NOPB","SOT-23",199.6948,-83.0213,0.0000,bottom

Assembly/c64psu-position-top_pos.csv

@@ -0,0 +1,94 @@
+Ref,Val,Package,PosX,PosY,Rot,Side
+"C1","10uF","C_1210_3225Metric",144.3500,-56.3900,-90.0000,top
+"C3","10uF","C_1210_3225Metric",157.6832,-49.8348,180.0000,top
+"C4","10uF","C_0805_2012Metric",176.3268,-54.1020,0.0000,top
+"C5","10uF","C_0805_2012Metric",175.7172,-42.7888,90.0000,top
+"C6","10uF","C_0805_2012Metric",177.8508,-42.7736,90.0000,top
+"C7","10uF","C_0805_2012Metric",179.9336,-42.7736,90.0000,top
+"C8","10uF","C_1210_3225Metric",166.0652,-59.0296,90.0000,top
+"C9","100nF","C_0402_1005Metric",168.5200,-51.8000,0.0000,top
+"C10","10uF","C_1210_3225Metric",157.6943,-53.0753,0.0000,top
+"C11","100nF","C_0402_1005Metric",169.1211,-57.7368,180.0000,top
+"C14","10uF","C_1210_3225Metric",166.6240,-63.0936,180.0000,top
+"C15","10uF","C_1210_3225Metric",166.6240,-66.3448,180.0000,top
+"C16","10uF","C_1210_3225Metric",166.6240,-69.6468,0.0000,top
+"C18","10uF","C_1210_3225Metric",154.8892,-71.8820,180.0000,top
+"C19","10uF","C_1206_3216Metric",175.4124,-83.6864,-90.0000,top
+"C20","1uF","C_0402_1005Metric",147.1398,-98.0270,180.0000,top
+"C26","10uF","C_1210_3225Metric",154.8892,-62.0776,180.0000,top
+"C27","1uF","C_0402_1005Metric",159.0268,-81.4832,0.0000,top
+"C28","1uF","C_0402_1005Metric",158.7500,-94.6404,0.0000,top
+"C29","1uF","C_0402_1005Metric",163.0680,-77.6732,90.0000,top
+"C30","1uF","C_0402_1005Metric",163.0172,-90.9828,90.0000,top
+"C31","10uF","C_1210_3225Metric",154.8892,-68.6308,0.0000,top
+"C32","100nF 50V","C_0402_1005Metric",158.7500,-93.6752,0.0000,top
+"C33","10uF","C_1210_3225Metric",154.8910,-65.3288,180.0000,top
+"C34","100nF 50V","C_0402_1005Metric",163.9824,-90.9828,-90.0000,top
+"C35","100nF","C_0402_1005Metric",152.1169,-74.8833,90.0000,top
+"C36","1uF","C_0402_1005Metric",147.1346,-97.0618,180.0000,top
+"C37","10uF","C_0805_2012Metric",182.0164,-42.7736,90.0000,top
+"C38","10uF","C_0805_2012Metric",176.3268,-52.0700,0.0000,top
+"C39","10uF","C_0805_2012Metric",172.7279,-52.1487,180.0000,top
+"C40","100nF 50V","C_0402_1005Metric",164.0332,-77.6732,-90.0000,top
+"C41","100nF 50V","C_0402_1005Metric",159.0040,-80.5180,0.0000,top
+"C46","10uF","C_0402_1005Metric",150.6945,-80.3977,180.0000,top
+"C47","100nF","C_0402_1005Metric",143.7082,-85.7334,0.0000,top
+"C48","10uF","C_0402_1005Metric",149.0422,-98.0270,0.0000,top
+"C49","100nF","C_0402_1005Metric",149.0422,-97.0618,180.0000,top
+"C59","100nF","C_0402_1005Metric",151.1250,-95.7410,0.0000,top
+"C60","100nF","C_0402_1005Metric",151.6838,-87.2574,90.0000,top
+"C61","100nF","C_0402_1005Metric",141.3206,-88.1210,90.0000,top
+"C62","100nF","C_0402_1005Metric",150.0849,-74.8605,90.0000,top
+"C63","100nF","C_0402_1005Metric",152.5461,-81.3629,0.0000,top
+"C94","16pF","C_0402_1005Metric",139.8982,-93.4042,45.0000,top
+"C97","16pF","C_0402_1005Metric",138.3742,-89.3402,45.0000,top
+"C104","1uF","C_0402_1005Metric",145.8075,-64.6568,180.0000,top
+"C142","10uF","C_0402_1005Metric",152.5233,-80.3977,0.0000,top
+"D1","LED","LED_0603_1608Metric",145.8900,-59.5100,0.0000,top
+"D3","SMAJ15A","D_SMA",145.5311,-49.2531,0.0000,top
+"D4","SMAJ18CA","D_SMA",172.4660,-83.7184,90.0000,top
+"D27","SD103AWS","D_SOD-323",148.7882,-100.4654,180.0000,top
+"IC1","AP33771CFBZ-13","SON40P300X300X80-15N-D",146.8175,-62.2368,180.0000,top
+"IC2","TPP363082-T6TR","SOT95P280X95-6N",168.6131,-54.2824,0.0000,top
+"J1","GSB1C4621DS1HR","AMPHENOL_GSB1C4621DS1HR",134.8500,-53.7750,-90.0000,top
+"J2","DIN-7","CUI_SDS-70J",210.9800,-48.4400,90.0000,top
+"J3","Conn_ST_STDC14","PinHeader_2x07_P1.27mm_Vertical_SMD",140.8634,-76.8942,-90.0000,top
+"JP1","Jumper_2_Open","PinHeader_1x02_P2.54mm_Vertical",170.8354,-69.3928,90.0000,top
+"JP2","Jumper_2_Open","PinHeader_1x02_P2.54mm_Vertical",171.1402,-100.7872,90.0000,top
+"JP5","Jumper_2_Open","PinHeader_1x02_P2.54mm_Vertical",170.7846,-65.6844,90.0000,top
+"JP6","Jumper_2_Open","PinHeader_1x02_P2.54mm_Vertical",171.1402,-97.0788,90.0000,top
+"L1","15uH","CSBX1060",169.0195,-45.5448,90.0000,top
+"MOSFET1","SQJ560EP-T1_GE3","POWERPAK_SO-8L_DUAL_VIS",167.9321,-77.2650,-90.0000,top
+"MOSFET2","SQJ560EP-T1_GE3","POWERPAK_SO-8L_DUAL_VIS",167.8686,-90.5492,-90.0000,top
+"Q1","DI025N06PT-AQ","TRANS_DI025N06PT-AQ",154.7100,-57.7498,180.0000,top
+"Q5","DI025N06PT-AQ","TRANS_DI025N06PT-AQ",152.8651,-53.6728,0.0000,top
+"R1","5m","R_0603_1608Metric",146.8707,-53.3171,0.0000,top
+"R3","10","R_0402_1005Metric",151.5951,-57.7387,-90.0000,top
+"R4","1k","R_0603_1608Metric",148.2475,-58.6668,90.0000,top
+"R5","52k 1%","R_0603_1608Metric",139.3523,-61.0388,180.0000,top
+"R6","52k 1%","R_0603_1608Metric",139.3473,-62.5487,180.0000,top
+"R7","100","R_0603_1608Metric",150.9250,-64.2500,180.0000,top
+"R8","510k","R_0603_1608Metric",169.2778,-59.5376,0.0000,top
+"R9","~","R_0402_1005Metric",169.1211,-56.6699,0.0000,top
+"R10","4.7","R_0402_1005Metric",163.4744,-89.5604,0.0000,top
+"R11","4.7","R_0402_1005Metric",163.4744,-92.8624,0.0000,top
+"R12","4.7","R_0402_1005Metric",163.5252,-76.2508,0.0000,top
+"R13","4.7","R_0402_1005Metric",163.5252,-79.6036,0.0000,top
+"R14","5.1k","R_0603_1608Metric",139.3444,-64.1096,180.0000,top
+"R15","5.1k","R_0603_1608Metric",139.3322,-65.6844,180.0000,top
+"R16","10","R_0402_1005Metric",142.9512,-84.7344,180.0000,top
+"R19","5.1k","R_0603_1608Metric",157.4292,-86.2584,90.0000,top
+"R20","5.1k","R_0603_1608Metric",155.9052,-86.2584,90.0000,top
+"R21","5m","R_0805_2012Metric",160.8328,-60.0964,-90.0000,top
+"R23","200m","R_0402_1005Metric",149.0422,-98.9922,180.0000,top
+"R29","10.2k","R_0402_1005Metric",171.5595,-54.2843,-90.0000,top
+"R30","1.37k","R_0402_1005Metric",171.5595,-56.2127,-90.0000,top
+"R31","5.1k","R_0603_1608Metric",160.2740,-73.0504,90.0000,top
+"R32","5.1k","R_0603_1608Metric",158.6992,-73.0626,90.0000,top
+"R71","27k","R_0402_1005Metric",147.1626,-98.9922,180.0000,top
+"T1","Transformer_1P_1S","9VAC_TRANSF",198.3700,-84.1100,0.0000,top
+"U2","STM32G474CBTx","LQFP-48_7x7mm_P0.5mm",147.0102,-91.3722,0.0000,top
+"U4","FAN3278","SOIC-8_3.9x4.9mm_P1.27mm",158.7642,-90.5002,0.0000,top
+"U5","FAN3278","SOIC-8_3.9x4.9mm_P1.27mm",158.8008,-77.3176,0.0000,top
+"U8","TLV75733PDBVR","SOT-23-5",151.0642,-77.8577,-90.0000,top
+"Y2","40MHz 10pF","Crystal_SMD_2520-4Pin_2.5x2.0mm",139.3902,-91.1182,45.0000,top

BoM/Generic/c64psu_bom.csv

@@ -0,0 +1,65 @@
+Reference,Value,Qty,Package,Description,Manufacturer,Part Number,LCSC Part,Digikey Part,Mouser Part
+"C94,C97",16pF,2,C_0402_1005Metric,Unpolarized capacitor,,CC0402FRNPO9BN160,,,
+"C9,C11,C22,C24,C32,C34,C35,C40,C41,C42,C47,C49,C59,C60,C61,C62,C63",100nF,17,C_0402_1005Metric,Unpolarized capacitor,,CC0402KRX5R9BB104 GRM155R61H104ME14,,,
+"C20,C27,C28,C29,C30,C36,C104",1uF,7,C_0402_1005Metric,Unpolarized capacitor,,CC0402KRX5R6BB105 CC0402KPX5R8BB105,,,
+"C1,C3,C8,C10,C12,C13,C14,C15,C16,C17,C18,C26,C31,C33,C44",10uF,15,C_1210_3225Metric,Unpolarized capacitor,,UMK325BJ106KM-P,,,
+"C2,C21,C46,C48,C142",10uF,5,C_0402_1005Metric,Unpolarized capacitor,,CC0402MPX5R5BB106,,,
+"C4,C5,C6,C7,C37,C38,C39",10uF,7,C_0805_2012Metric,Unpolarized capacitor,,GRM21BR61C106KE15K,,,
+D1,LED,1,LED_0603_1608Metric,Light emitting diode,,IN-S63AT5B,,,
+D27,SD103AWS,1,D_SOD-323,Schottky diode,,SD103AWS,,,
+D3,SMAJ15A,1,D_SMA,"400W unidirectional Transient Voltage Suppressor, 15.0Vr, SMA(DO-214AC)",,SMAJ15A,,,
+D2,SMAJ15CA,1,D_SMA,"400W bidirectional Transient Voltage Suppressor, 15.0Vr, SMA(DO-214AC)",,SMAJ15CA,,,
+D4,SMAJ18CA,1,D_SMA,,,SMAJ18CA,,,
+IC1,AP33771CFBZ-13,1,SON40P300X300X80-15N-D,USB Interface IC USB Ext Power Range W-DFN3030-14 T&R 3K,,AP33771CFBZ-13,,,
+IC2,TPP363082-T6TR,1,SOT95P280X95-6N,Step-Down DC-DC Voltage Converter IC TSOT23-6,,TPP363082-T6TR,,,
+J3,Conn_ST_STDC14,1,PinHeader_2x07_P1.27mm_Vertical_SMD,"ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART",,3221-14-0300-00,,,
+J2,DIN-7,1,CUI_SDS-70J,7-pin DIN connector,,SDS-70J,,,
+J1,GSB1C4621DS1HR,1,AMPHENOL_GSB1C4621DS1HR,"USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle",Amphenol,GSB1C4621DS1HR,,,
+"JP1,JP2,JP3,JP4,JP5,JP6",Jumper_2_Open,6,PinHeader_1x02_P2.54mm_Vertical,"Jumper, 2-pole, open",,JL-100-25-T,,,
+L1,15uH,1,CSBX1060,Inductor,,CSBX1060-150M,,,
+"MOSFET1,MOSFET2",SQJ560EP-T1_GE3,2,POWERPAK_SO-8L_DUAL_VIS,,,SQJ560EP-T1_GE3,,,
+"Q1,Q5",DI025N06PT-AQ,2,TRANS_DI025N06PT-AQ,,Diotec Semiconductor,DI025N06PT-AQ,,,
+R1,5m,1,R_0603_1608Metric,Resistor,,PE0603FRF570R005L,,,
+R21,5m,1,R_0805_2012Metric,Resistor,,PA0805FRF470R005L,,,
+R23,200m,1,R_0402_1005Metric,Resistor,,PT0402FR-7W0R2L,,,
+"R10,R11,R12,R13",4.7,4,R_0402_1005Metric,Resistor,,RT0402BRE074R7L,,,
+"R3,R16",10,2,R_0402_1005Metric,Resistor,,RT0402FRE0710RL,,,
+R7,100,1,R_0603_1608Metric,Resistor,,RC0603FR-13100RL,,,
+R26,205,1,R_0603_1608Metric,Resistor,,RT0603BRD07205RL,,,
+"R25,R27",470,2,R_0603_1608Metric,Resistor,,RT0603BRD07470RL,,,
+R4,1k,1,R_0603_1608Metric,Resistor,,RC0603JR-131KL,,,
+R30,1.37k,1,R_0402_1005Metric,Resistor,,RT0402DRE071K37L,,,
+"R22,R24",4k7,2,R_0603_1608Metric,Resistor,,RT0603BRD074K7L,,,
+"R14,R15,R19,R20,R31,R32",5.1k,6,R_0603_1608Metric,Resistor,,RC0603FR-075K1L,,,
+R29,10.2k,1,R_0402_1005Metric,Resistor,,RT0402DRD0710K2L,,,
+"R2,R28,R47",20k,3,R_0603_1608Metric,Resistor,,RC0603FR-1320KL,,,
+R71,27k,1,R_0402_1005Metric,Resistor,,RC0402JR-0727KL,,,
+"R5,R6",52k 1%,2,R_0603_1608Metric,Resistor,,RT0603BRD0752K3L,,,
+"R43,R46",100k,2,R_0603_1608Metric,Resistor,,,,,
+R45,180k,1,R_0603_1608Metric,Resistor,,,,,
+R44,200k,1,R_0603_1608Metric,Resistor,,,,,
+R8,510k,1,R_0603_1608Metric,Resistor,,RC0603FR-07510KL,,,
+"U4,U5",FAN3278,2,SOIC-8_3.9x4.9mm_P1.27mm,"8-27V PMOS-NMOS Bridge Driver, SOIC-8",,FAN3278T,,,
+U1,INA180A2,1,SOT-23-5,"Current Sense Amplifier, 1 Circuit, Rail-to-Rail, 26V, Gain 50 V/V, SOT-23-5",,INA180A2IDBVR,,,
+U3,LM321,1,SOT-23-5,"Low Power Single Operational Amplifier, SOT-23-5",,LM321AW-S5TR,,,
+U7,LM4041CIM3X-1.2/NOPB,1,SOT-23,"2.048V Precision Micropower Shunt Voltage Reference, SOT-23",,LM4041CIM3X-1.2/NOPB,,,
+U2,STM32G474CBTx,1,LQFP-48_7x7mm_P0.5mm,"STMicroelectronics Arm Cortex-M4 MCU, 128KB flash, 128KB RAM, 170 MHz, 1.71-3.6V, 38 GPIO, LQFP48",,STM32G474CBT6,,,
+U8,TLV75733PDBVR,1,SOT-23-5,"200mA Low Dropout Voltage Regulator, Fixed Output 1.2V, SOT-23-5",,TLV75733PDBVR,,,
+Y2,40MHz 10pF,1,Crystal_SMD_2520-4Pin_2.5x2.0mm,"Four pin crystal, GND on pins 2 and 4",,ECS-400-10-36B2-CKM-TR,,,
+
+
+
+
+
+Project info:
+Schematic:,c64psu
+Variant:,default
+Revision:,
+Date:,2025-12-16_10-23-18
+KiCad Version:,9.0.1+1
+Statistics:
+Component Groups:,51
+Component Count:,133
+Fitted Components:,117
+Number of PCBs:,1
+Total Components:,117

BoM/Generic/c64psu_bom.html

@@ -0,0 +1,872 @@
+<html>
+<head>
+ <meta charset="UTF-8">
+ <title>Bill of Materials - c64psu</title>
+<style>
+ .cell-title { vertical-align: bottom; }
+ .cell-info { vertical-align: top; padding: 1em;}
+ .cell-extra-info { vertical-align: top; padding: 1em;}
+ .cell-stats { vertical-align: top; padding: 1em;}
+ .title { font-size:2.5em; font-weight: bold; }
+ .subtitle { font-size:1.5em; font-weight: bold; }
+ .h2 { font-size:1.5em; font-weight: bold; }
+ .td-empty0 { text-align: center; background-color: #F57676;}
+ .td-gen0 { text-align: center; background-color: #DCF5E4;}
+ .td-kicad0 { text-align: center; background-color: #F5DCA9;}
+ .td-user0 { text-align: center; background-color: #DCEFF5;}
+ .td-empty1 { text-align: center; background-color: #FF8080;}
+ .td-gen1 { text-align: center; background-color: #E6FFEE;}
+ .td-kicad1 { text-align: center; background-color: #FFE6B3;}
+ .td-user1 { text-align: center; background-color: #E6F9FF;}
+ .td-nocolor { text-align: center; }
+ .color-ref { margin: 25px 0; }
+ .color-ref th { text-align: left }
+ .color-ref td { padding: 5px 20px; }
+ .head-table { margin-bottom: 2em; }
+ .centered-checkmark { font-size: 30vw; text-align: center; color: green; }
+ .tg-sort-header::-moz-selection{background:0 0}
+ .tg-sort-header::selection{background:0 0}.tg-sort-header{cursor:pointer}
+ .tg-sort-header:after{content:'';float:right;border-width:0 5px 5px;border-style:solid;
+                       border-color:#ffffff transparent;visibility:hidden;opacity:.6}
+ .tg-sort-header:hover:after{visibility:visible}
+ .tg-sort-asc:after,.tg-sort-asc:hover:after,.tg-sort-desc:after{visibility:visible;opacity:1}
+ .tg-sort-desc:after{border-bottom:none;border-width:5px 5px 0}
+
+ .content-table {
+   border-collapse:
+   collapse;
+   margin-top: 5px;
+   margin-bottom: 4em;
+   font-size: 0.9em;
+   font-family: sans-serif;
+   min-width: 400px;
+   border-radius: 5px 5px 0 0;
+   overflow: hidden;
+   box-shadow: 0 0 20px rgba(0, 0, 0, 0.15);
+ }
+ .content-table thead tr { background-color: #0e4e8e; color: #ffffff; text-align: left; }
+ .content-table th, .content-table td { padding: 12px 15px; }
+ .content-table tbody tr { border-bottom: 1px solid #dddddd; }
+ .content-table tbody tr:nth-of-type(even) { background-color: #f3f3f3; }
+ .content-table tbody tr:last-of-type { border-bottom: 2px solid #0e4e8e; }
+ .content-table * tr:hover > td { background-color: @bgl@ !important }
+
+ .content-table {
+   border-collapse:
+   collapse;
+   margin-top: 5px;
+   margin-bottom: 4em;
+   font-size: 0.9em;
+   font-family: sans-serif;
+   min-width: 400px;
+   border-radius: 5px 5px 0 0;
+   overflow: hidden;
+   box-shadow: 0 0 20px rgba(0, 0, 0, 0.15);
+ }
+ .content-table thead tr { background-color: @bg@; color: #ffffff; text-align: left; }
+ .content-table th, .content-table td { padding: 12px 15px; }
+ .content-table tbody tr { border-bottom: 1px solid #dddddd; }
+ .content-table tbody tr:nth-of-type(even) { background-color: #f3f3f3; }
+ .content-table tbody tr:last-of-type { border-bottom: 2px solid @bg@; }
+ .content-table * tr:hover > td { background-color: #3e7ebe !important }
+</style>
+</head>
+<body>
+<table class="head-table">
+<tr>
+ <td rowspan="2">
+ </td>
+ <td colspan="2" class="cell-title">
+  <div class="title">Bill of Materials - c64psu</div>
+ </td>
+</tr>
+<tr>
+ <td class="cell-info">
+   <b>Schematic</b>: c64psu<br>
+   <b>Variant</b>: default<br>
+   <b>Revision</b>: <br>
+   <b>Date</b>: 2025-12-16_10-23-18<br>
+   <b>KiCad Version</b>: 9.0.1+1<br>
+ </td>
+ <td class="cell-stats">
+   <b>Component Groups</b>: 51<br>
+   <b>Component Count</b>: 133 (per PCB)<br>
+
+   <b>Fitted Components</b>: 117 (per PCB)<br>
+   <b>Number of PCBs</b>: 1<br>
+   <b>Total Components</b>: 117 (for 1 PCBs)<br>
+ </td>
+</tr>
+</table>
+<h2>Component Groups</h2>
+<table class="content-table">
+ <thead>
+  <tr>
+   <th class="th-kicad">Reference</th>
+   <th class="th-kicad">Value</th>
+   <th class="th-gen">Qty</th>
+   <th class="th-kicad">Package</th>
+   <th class="th-user">Description</th>
+   <th class="th-user">Manufacturer</th>
+   <th class="th-user">Part Number</th>
+   <th class="th-user">LCSC Part</th>
+   <th class="th-user">Digikey Part</th>
+   <th class="th-user">Mouser Part</th>
+  </tr>
+ </thead>
+ <tbody>
+  <tr id="0">
+   <td class="td-kicad0"><div id="C97"></div><div id="C94"></div>C94 C97</td>
+   <td class="td-kicad0">16pF</td>
+   <td class="td-gen0">2</td>
+   <td class="td-kicad0">C_0402_1005Metric</td>
+   <td class="td-user0">Unpolarized capacitor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">CC0402FRNPO9BN160</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="1">
+   <td class="td-kicad1"><div id="C63"></div><div id="C62"></div><div id="C61"></div><div id="C60"></div><div id="C59"></div><div id="C49"></div><div id="C47"></div><div id="C42"></div><div id="C41"></div><div id="C40"></div><div id="C35"></div><div id="C34"></div><div id="C32"></div><div id="C24"></div><div id="C22"></div><div id="C11"></div><div id="C9"></div>C9 C11 C22 C24 C32 C34 C35 C40 C41 C42 C47 C49 C59 C60 C61 C62 C63</td>
+   <td class="td-kicad1">100nF</td>
+   <td class="td-gen1">17</td>
+   <td class="td-kicad1">C_0402_1005Metric</td>
+   <td class="td-user1">Unpolarized capacitor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">CC0402KRX5R9BB104 GRM155R61H104ME14</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="2">
+   <td class="td-kicad0"><div id="C104"></div><div id="C36"></div><div id="C30"></div><div id="C29"></div><div id="C28"></div><div id="C27"></div><div id="C20"></div>C20 C27 C28 C29 C30 C36 C104</td>
+   <td class="td-kicad0">1uF</td>
+   <td class="td-gen0">7</td>
+   <td class="td-kicad0">C_0402_1005Metric</td>
+   <td class="td-user0">Unpolarized capacitor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">CC0402KRX5R6BB105 CC0402KPX5R8BB105</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="3">
+   <td class="td-kicad1"><div id="C44"></div><div id="C33"></div><div id="C31"></div><div id="C26"></div><div id="C18"></div><div id="C17"></div><div id="C16"></div><div id="C15"></div><div id="C14"></div><div id="C13"></div><div id="C12"></div><div id="C10"></div><div id="C8"></div><div id="C3"></div><div id="C1"></div>C1 C3 C8 C10 C12 C13 C14 C15 C16 C17 C18 C26 C31 C33 C44</td>
+   <td class="td-kicad1">10uF</td>
+   <td class="td-gen1">15</td>
+   <td class="td-kicad1">C_1210_3225Metric</td>
+   <td class="td-user1">Unpolarized capacitor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">UMK325BJ106KM-P</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="4">
+   <td class="td-kicad0"><div id="C142"></div><div id="C48"></div><div id="C46"></div><div id="C21"></div><div id="C2"></div>C2 C21 C46 C48 C142</td>
+   <td class="td-kicad0">10uF</td>
+   <td class="td-gen0">5</td>
+   <td class="td-kicad0">C_0402_1005Metric</td>
+   <td class="td-user0">Unpolarized capacitor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">CC0402MPX5R5BB106</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="6">
+   <td class="td-kicad1"><div id="C39"></div><div id="C38"></div><div id="C37"></div><div id="C7"></div><div id="C6"></div><div id="C5"></div><div id="C4"></div>C4 C5 C6 C7 C37 C38 C39</td>
+   <td class="td-kicad1">10uF</td>
+   <td class="td-gen1">7</td>
+   <td class="td-kicad1">C_0805_2012Metric</td>
+   <td class="td-user1">Unpolarized capacitor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">GRM21BR61C106KE15K</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="7">
+   <td class="td-kicad0"><div id="D1"></div>D1</td>
+   <td class="td-kicad0">LED</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">LED_0603_1608Metric</td>
+   <td class="td-user0">Light emitting diode</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">IN-S63AT5B</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="8">
+   <td class="td-kicad1"><div id="D27"></div>D27</td>
+   <td class="td-kicad1">SD103AWS</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">D_SOD-323</td>
+   <td class="td-user1">Schottky diode</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">SD103AWS</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="9">
+   <td class="td-kicad0"><div id="D3"></div>D3</td>
+   <td class="td-kicad0">SMAJ15A</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">D_SMA</td>
+   <td class="td-user0">400W unidirectional Transient Voltage Suppressor, 15.0Vr, SMA(DO-214AC)</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">SMAJ15A</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="10">
+   <td class="td-kicad1"><div id="D2"></div>D2</td>
+   <td class="td-kicad1">SMAJ15CA</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">D_SMA</td>
+   <td class="td-user1">400W bidirectional Transient Voltage Suppressor, 15.0Vr, SMA(DO-214AC)</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">SMAJ15CA</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="11">
+   <td class="td-kicad0"><div id="D4"></div>D4</td>
+   <td class="td-kicad0">SMAJ18CA</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">D_SMA</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">SMAJ18CA</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="12">
+   <td class="td-kicad1"><div id="IC1"></div>IC1</td>
+   <td class="td-kicad1">AP33771CFBZ-13</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">SON40P300X300X80-15N-D</td>
+   <td class="td-user1">USB Interface IC USB Ext Power Range W-DFN3030-14 T&R 3K</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">AP33771CFBZ-13</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="13">
+   <td class="td-kicad0"><div id="IC2"></div>IC2</td>
+   <td class="td-kicad0">TPP363082-T6TR</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">SOT95P280X95-6N</td>
+   <td class="td-user0">Step-Down DC-DC Voltage Converter IC TSOT23-6</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">TPP363082-T6TR</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="14">
+   <td class="td-kicad1"><div id="J3"></div>J3</td>
+   <td class="td-kicad1">Conn_ST_STDC14</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">PinHeader_2x07_P1.27mm_Vertical_SMD</td>
+   <td class="td-user1">ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">3221-14-0300-00</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="15">
+   <td class="td-kicad0"><div id="J2"></div>J2</td>
+   <td class="td-kicad0">DIN-7</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">CUI_SDS-70J</td>
+   <td class="td-user0">7-pin DIN connector</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">SDS-70J</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="16">
+   <td class="td-kicad1"><div id="J1"></div>J1</td>
+   <td class="td-kicad1">GSB1C4621DS1HR</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">AMPHENOL_GSB1C4621DS1HR</td>
+   <td class="td-user1">USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle</td>
+   <td class="td-user1">Amphenol</td>
+   <td class="td-user1">GSB1C4621DS1HR</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="17">
+   <td class="td-kicad0"><div id="JP6"></div><div id="JP5"></div><div id="JP4"></div><div id="JP3"></div><div id="JP2"></div><div id="JP1"></div>JP1 JP2 JP3 JP4 JP5 JP6</td>
+   <td class="td-kicad0">Jumper_2_Open</td>
+   <td class="td-gen0">6</td>
+   <td class="td-kicad0">PinHeader_1x02_P2.54mm_Vertical</td>
+   <td class="td-user0">Jumper, 2-pole, open</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">JL-100-25-T</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="18">
+   <td class="td-kicad1"><div id="L1"></div>L1</td>
+   <td class="td-kicad1">15uH</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">CSBX1060</td>
+   <td class="td-user1">Inductor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">CSBX1060-150M</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="19">
+   <td class="td-kicad0"><div id="MOSFET2"></div><div id="MOSFET1"></div>MOSFET1 MOSFET2</td>
+   <td class="td-kicad0">SQJ560EP-T1_GE3</td>
+   <td class="td-gen0">2</td>
+   <td class="td-kicad0">POWERPAK_SO-8L_DUAL_VIS</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">SQJ560EP-T1_GE3</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="20">
+   <td class="td-kicad1"><div id="Q5"></div><div id="Q1"></div>Q1 Q5</td>
+   <td class="td-kicad1">DI025N06PT-AQ</td>
+   <td class="td-gen1">2</td>
+   <td class="td-kicad1">TRANS_DI025N06PT-AQ</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">Diotec Semiconductor</td>
+   <td class="td-user1">DI025N06PT-AQ</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="21">
+   <td class="td-kicad0"><div id="R1"></div>R1</td>
+   <td class="td-kicad0">5m</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0603_1608Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">PE0603FRF570R005L</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="22">
+   <td class="td-kicad1"><div id="R21"></div>R21</td>
+   <td class="td-kicad1">5m</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">R_0805_2012Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">PA0805FRF470R005L</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="23">
+   <td class="td-kicad0"><div id="R23"></div>R23</td>
+   <td class="td-kicad0">200m</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0402_1005Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">PT0402FR-7W0R2L</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="27">
+   <td class="td-kicad1"><div id="R13"></div><div id="R12"></div><div id="R11"></div><div id="R10"></div>R10 R11 R12 R13</td>
+   <td class="td-kicad1">4.7</td>
+   <td class="td-gen1">4</td>
+   <td class="td-kicad1">R_0402_1005Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RT0402BRE074R7L</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="28">
+   <td class="td-kicad0"><div id="R16"></div><div id="R3"></div>R3 R16</td>
+   <td class="td-kicad0">10</td>
+   <td class="td-gen0">2</td>
+   <td class="td-kicad0">R_0402_1005Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RT0402FRE0710RL</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="29">
+   <td class="td-kicad1"><div id="R7"></div>R7</td>
+   <td class="td-kicad1">100</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RC0603FR-13100RL</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="30">
+   <td class="td-kicad0"><div id="R26"></div>R26</td>
+   <td class="td-kicad0">205</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0603_1608Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RT0603BRD07205RL</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="31">
+   <td class="td-kicad1"><div id="R27"></div><div id="R25"></div>R25 R27</td>
+   <td class="td-kicad1">470</td>
+   <td class="td-gen1">2</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RT0603BRD07470RL</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="32">
+   <td class="td-kicad0"><div id="R4"></div>R4</td>
+   <td class="td-kicad0">1k</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0603_1608Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RC0603JR-131KL</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="33">
+   <td class="td-kicad1"><div id="R30"></div>R30</td>
+   <td class="td-kicad1">1.37k</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">R_0402_1005Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RT0402DRE071K37L</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="34">
+   <td class="td-kicad0"><div id="R24"></div><div id="R22"></div>R22 R24</td>
+   <td class="td-kicad0">4k7</td>
+   <td class="td-gen0">2</td>
+   <td class="td-kicad0">R_0603_1608Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RT0603BRD074K7L</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="35">
+   <td class="td-kicad1"><div id="R32"></div><div id="R31"></div><div id="R20"></div><div id="R19"></div><div id="R15"></div><div id="R14"></div>R14 R15 R19 R20 R31 R32</td>
+   <td class="td-kicad1">5.1k</td>
+   <td class="td-gen1">6</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RC0603FR-075K1L</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="36">
+   <td class="td-kicad0"><div id="R29"></div>R29</td>
+   <td class="td-kicad0">10.2k</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0402_1005Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RT0402DRD0710K2L</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="37">
+   <td class="td-kicad1"><div id="R47"></div><div id="R28"></div><div id="R2"></div>R2 R28 R47</td>
+   <td class="td-kicad1">20k</td>
+   <td class="td-gen1">3</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RC0603FR-1320KL</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="38">
+   <td class="td-kicad0"><div id="R71"></div>R71</td>
+   <td class="td-kicad0">27k</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0402_1005Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RC0402JR-0727KL</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="39">
+   <td class="td-kicad1"><div id="R6"></div><div id="R5"></div>R5 R6</td>
+   <td class="td-kicad1">52k 1%</td>
+   <td class="td-gen1">2</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RT0603BRD0752K3L</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="40">
+   <td class="td-kicad0"><div id="R46"></div><div id="R43"></div>R43 R46</td>
+   <td class="td-kicad0">100k</td>
+   <td class="td-gen0">2</td>
+   <td class="td-kicad0">R_0603_1608Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="41">
+   <td class="td-kicad1"><div id="R45"></div>R45</td>
+   <td class="td-kicad1">180k</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="42">
+   <td class="td-kicad0"><div id="R44"></div>R44</td>
+   <td class="td-kicad0">200k</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">R_0603_1608Metric</td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="43">
+   <td class="td-kicad1"><div id="R8"></div>R8</td>
+   <td class="td-kicad1">510k</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">R_0603_1608Metric</td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RC0603FR-07510KL</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="44">
+   <td class="td-kicad0"><div id="U5"></div><div id="U4"></div>U4 U5</td>
+   <td class="td-kicad0">FAN3278</td>
+   <td class="td-gen0">2</td>
+   <td class="td-kicad0">SOIC-8_3.9x4.9mm_P1.27mm</td>
+   <td class="td-user0">8-27V PMOS-NMOS Bridge Driver, SOIC-8</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">FAN3278T</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="45">
+   <td class="td-kicad1"><div id="U1"></div>U1</td>
+   <td class="td-kicad1">INA180A2</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">SOT-23-5</td>
+   <td class="td-user1">Current Sense Amplifier, 1 Circuit, Rail-to-Rail, 26V, Gain 50 V/V, SOT-23-5</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">INA180A2IDBVR</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="46">
+   <td class="td-kicad0"><div id="U3"></div>U3</td>
+   <td class="td-kicad0">LM321</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">SOT-23-5</td>
+   <td class="td-user0">Low Power Single Operational Amplifier, SOT-23-5</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">LM321AW-S5TR</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="47">
+   <td class="td-kicad1"><div id="U7"></div>U7</td>
+   <td class="td-kicad1">LM4041CIM3X-1.2/NOPB</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">SOT-23</td>
+   <td class="td-user1">2.048V Precision Micropower Shunt Voltage Reference, SOT-23</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">LM4041CIM3X-1.2/NOPB</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="48">
+   <td class="td-kicad0"><div id="U2"></div>U2</td>
+   <td class="td-kicad0">STM32G474CBTx</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">LQFP-48_7x7mm_P0.5mm</td>
+   <td class="td-user0">STMicroelectronics Arm Cortex-M4 MCU, 128KB flash, 128KB RAM, 170 MHz, 1.71-3.6V, 38 GPIO, LQFP48</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">STM32G474CBT6</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="49">
+   <td class="td-kicad1"><div id="U8"></div>U8</td>
+   <td class="td-kicad1">TLV75733PDBVR</td>
+   <td class="td-gen1">1</td>
+   <td class="td-kicad1">SOT-23-5</td>
+   <td class="td-user1">200mA Low Dropout Voltage Regulator, Fixed Output 1.2V, SOT-23-5</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">TLV75733PDBVR</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="50">
+   <td class="td-kicad0"><div id="Y2"></div>Y2</td>
+   <td class="td-kicad0">40MHz 10pF</td>
+   <td class="td-gen0">1</td>
+   <td class="td-kicad0">Crystal_SMD_2520-4Pin_2.5x2.0mm</td>
+   <td class="td-user0">Four pin crystal, GND on pins 2 and 4</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">ECS-400-10-36B2-CKM-TR</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+ </tbody>
+</table>
+<h2>Optional components (DNF=Do Not Fit)</h2>
+<table class="content-table">
+ <thead>
+  <tr>
+   <th class="th-kicad">Reference</th>
+   <th class="th-kicad">Value</th>
+   <th class="th-gen">Qty</th>
+   <th class="th-kicad">Package</th>
+   <th class="th-user">Description</th>
+   <th class="th-user">Manufacturer</th>
+   <th class="th-user">Part Number</th>
+   <th class="th-user">LCSC Part</th>
+   <th class="th-user">Digikey Part</th>
+   <th class="th-user">Mouser Part</th>
+  </tr>
+ </thead>
+ <tbody>
+  <tr id="5">
+   <td class="td-kicad0"><div id="C43"></div><div id="C25"></div><div id="C23"></div><div id="C19"></div>C19 C23 C25 C43</td>
+   <td class="td-kicad0">10uF</td>
+   <td class="td-gen0">4</td>
+   <td class="td-kicad0">C_1206_3216Metric</td>
+   <td class="td-user0">Unpolarized capacitor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">CC1206KKX5R9BB106</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="24">
+   <td class="td-kicad1"><div id="R40"></div><div id="R37"></div><div id="R34"></div><div id="R33"></div>R33 R34 R37 R40</td>
+   <td class="td-kicad1">1</td>
+   <td class="td-gen1">4</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RL0510S-1R0-F</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+  <tr id="25">
+   <td class="td-kicad0"><div id="R41"></div><div id="R38"></div><div id="R35"></div><div id="R17"></div>R17 R35 R38 R41</td>
+   <td class="td-kicad0">2r2</td>
+   <td class="td-gen0">4</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">Resistor</td>
+   <td class="td-empty0"></td>
+   <td class="td-user0">RL0510S-2R2-F</td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+   <td class="td-empty0"></td>
+  </tr>
+  <tr id="26">
+   <td class="td-kicad1"><div id="R42"></div><div id="R39"></div><div id="R36"></div><div id="R18"></div>R18 R36 R39 R42</td>
+   <td class="td-kicad1">3r3</td>
+   <td class="td-gen1">4</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">Resistor</td>
+   <td class="td-empty1"></td>
+   <td class="td-user1">RL0510S-3R3-F</td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+   <td class="td-empty1"></td>
+  </tr>
+ </tbody>
+</table>
+<table class="color-ref">
+<tr><th>Color reference for columns:</th></tr>
+<tr><td class="td-kicad0">KiCad Fields (default)</td></tr>
+<tr><td class="td-gen0">Generated Fields</td></tr>
+<tr><td class="td-user0">User Fields</td></tr>
+<tr><td class="td-empty0">Empty Fields</td></tr>
+</table>
+<script charset="utf-8">
+  var TGSort = window.TGSort || function(n) {
+    "use strict";
+    function r(n) { return n ? n.length : 0 }
+    function t(n, t, e, o = 0) { for (e = r(n); o < e; ++o) t(n[o], o) }
+    function e(n) { return n.split("").reverse().join("") }
+    function o(n) {
+      var e = n[0];
+      return t(n, function(n) {
+        for (; !n.startsWith(e);) e = e.substring(0, r(e) - 1)
+      }), r(e)
+    }
+    function u(n, r, e = []) {
+      return t(n, function(n) {
+        r(n) && e.push(n)
+      }), e
+    }
+    var a = parseFloat;
+    function i(n, r) {
+      return function(t) {
+        var e = "";
+        return t.replace(n, function(n, t, o) {
+          return e = t.replace(r, "") + "." + (o || "").substring(1)
+        }), a(e)
+      }
+    }
+    var s = i(/^(?:\s*)([+-]?(?:\d+)(?:,\d{3})*)(\.\d*)?$/g, /,/g),
+      c = i(/^(?:\s*)([+-]?(?:\d+)(?:\.\d{3})*)(,\d*)?$/g, /\./g);
+    function f(n) {
+      var t = a(n);
+      return !isNaN(t) && r("" + t) + 1 >= r(n) ? t : NaN
+    }
+    function d(n) {
+      var e = [],
+        o = n;
+      return t([f, s, c], function(u) {
+        var a = [],
+          i = [];
+        t(n, function(n, r) {
+          r = u(n), a.push(r), r || i.push(n)
+        }), r(i) < r(o) && (o = i, e = a)
+      }), r(u(o, function(n) {
+        return n == o[0]
+      })) == r(o) ? e : []
+    }
+    function v(n) {
+      if ("TABLE" == n.nodeName) {
+        for (var a = function(r) {
+            var e, o, u = [],
+              a = [];
+            return function n(r, e) {
+              e(r), t(r.childNodes, function(r) {
+                n(r, e)
+              })
+            }(n, function(n) {
+              "TR" == (o = n.nodeName) ? (e = [], u.push(e), a.push(n)) : "TD" != o && "TH" != o || e.push(n)
+            }), [u, a]
+          }(), i = a[0], s = a[1], c = r(i), f = c > 1 && r(i[0]) < r(i[1]) ? 1 : 0, v = f + 1, p = i[f], h = r(p), l = [], g = [], N = [], m = v; m < c; ++m) {
+          for (var T = 0; T < h; ++T) {
+            r(g) < h && g.push([]);
+            var C = i[m][T],
+              L = C.textContent || C.innerText || "";
+            g[T].push(L.trim())
+          }
+          N.push(m - v)
+        }
+        t(p, function(n, t) {
+          l[t] = 0;
+          var a = n.classList;
+          a.add("tg-sort-header"), n.addEventListener("click", function() {
+            var n = l[t];
+            ! function() {
+              for (var n = 0; n < h; ++n) {
+                var r = p[n].classList;
+                r.remove("tg-sort-asc"), r.remove("tg-sort-desc"), l[n] = 0
+              }
+            }(), (n = 1 == n ? -1 : +!n) && a.add(n > 0 ? "tg-sort-asc" : "tg-sort-desc"), l[t] = n;
+            var i, f = g[t],
+              m = function(r, t) {
+                return n * f[r].localeCompare(f[t]) || n * (r - t)
+              },
+              T = function(n) {
+                var t = d(n);
+                if (!r(t)) {
+                  var u = o(n),
+                    a = o(n.map(e));
+                  t = d(n.map(function(n) {
+                    return n.substring(u, r(n) - a)
+                  }))
+                }
+                return t
+              }(f);
+            (r(T) || r(T = r(u(i = f.map(Date.parse), isNaN)) ? [] : i)) && (m = function(r, t) {
+              var e = T[r],
+                o = T[t],
+                u = isNaN(e),
+                a = isNaN(o);
+              return u && a ? 0 : u ? -n : a ? n : e > o ? n : e < o ? -n : n * (r - t)
+            });
+            var C, L = N.slice();
+            L.sort(m);
+            for (var E = v; E < c; ++E)(C = s[E].parentNode).removeChild(s[E]);
+            for (E = v; E < c; ++E) C.appendChild(s[v + L[E - v]])
+          })
+        })
+      }
+    }
+    n.addEventListener("DOMContentLoaded", function() {
+      for (var t = n.getElementsByClassName("content-table"), e = 0; e < r(t); ++e) try {
+        v(t[e])
+      } catch (n) {}
+    })
+  }(document)
+</script>
+</body></html>

DIFF/README.md

@@ -0,0 +1,15 @@
+# KiCad Project Diff Report
+
+**Base Commit:** 5e21ee15
+**Head Commit:** e9775f2c
+**Date:** Tue Dec 16 10:23:18 UTC 2025
+
+## Changed Files:
+M	kicad/c64psu/c64psu.kicad_sch
+
+## Summary:
+ kicad/c64psu/c64psu.kicad_sch | 2686 +++++++++++++++++++----------------------
+ 1 file changed, 1240 insertions(+), 1446 deletions(-)
+
+## Commit Messages:
+e9775f2 seperated into transformer / experimental

Datasheets/Capacitors/C32_100nF 50V.pdf

@@ -0,0 +1,126 @@
+<!DOCTYPE html>
+    <html class="react-root">    
+      <head>
+        <link rel="stylesheet" type="text/css" href="/assets/static/src_styles_global-00f5cfaf.B9h5MWpr.css">
+        <link rel="stylesheet" type="text/css" href="/assets/static/src_styles_simgraph-2e2e66e0.xdRgJchD.css">
+        <link rel="stylesheet" type="text/css" href="/assets/static/src_styles_footer_cn-e9255475.C6VRb3Zo.css">
+        <link rel="stylesheet" type="text/css" href="/assets/static/src_styles_jquery.qtip.C0pyK8Sv.css">
+        <link rel="stylesheet" type="text/css" href="/assets/static/src_styles_global-00f5cfaf.Bp-vOpln.css">
+        <!-- OneTrust Cookies Consent Notice start -->
+        <script type="text/javascript" src="https://cdn.cookielaw.org/consent/b866f587-e7d0-4f41-bb98-ffe290290472/OtAutoBlock.js"></script>
+        <script src="https://cdn.cookielaw.org/scripttemplates/otSDKStub.js"  type="text/javascript" charset="UTF-8" data-domain-script="b866f587-e7d0-4f41-bb98-ffe290290472"></script>
+        <script type="text/javascript">
+        function OptanonWrapper() { }
+        </script>
+        <script type="text/javascript">
+        window.addEventListener("OTConsentApplied", function(e) {
+          document.location.reload();
+        }, { once: true });
+        </script>
+        <!-- OneTrust Cookies Consent Notice end -->
+        
+        <script src="https://assets.adobedtm.com/193a95d152ddc4b48eec9ef739f5e8baea85bc42/satelliteLib-cd45bb235be3c8a9435191c7064254804b40eb59.js" charset="utf-8"></script>
+
+        <!-- Google Tag Manager -->
+        <script>(function(w,d,s,l,i){w[l]=w[l]||[];w[l].push({'gtm.start':
+        new Date().getTime(),event:'gtm.js'});var f=d.getElementsByTagName(s)[0],
+        j=d.createElement(s),dl=l!='dataLayer'?'&l='+l:'';j.async=true;j.src=
+        'https://www.googletagmanager.com/gtm.js?id='+i+dl;f.parentNode.insertBefore(j,f);
+        })(window,document,'script','dataLayer','GTM-PRTZ8QW');</script>
+        <!-- End Google Tag Manager -->
+        <meta charset="UTF-8" />
+        <meta name="viewport" content="width=device-width, initial-scale=1, minimum-scale=1">
+        
+        <!-- クリティカルCSSをインライン化 -->
+        <style>
+    /* Reset & Base */
+    * { box-sizing: border-box; }
+    body { 
+      margin: 0; 
+      padding: 0; 
+      line-height: 1.6;
+    }
+    
+    /* ヘッダー（ファーストビューに表示される部分） */
+    .header { 
+      background: #fff; 
+      border-bottom: 1px solid #ddd;
+      position: sticky;
+      top: 0;
+      z-index: 100;
+    }
+    
+    /* ローディングスピナー */
+    .loading-spinner { 
+      display: flex; 
+      justify-content: center; 
+      align-items: center; 
+      height: 100vh; 
+    }
+    
+    /* 検索フォーム（ファーストビューに表示） */
+    .search-form {
+      max-width: 1200px;
+      margin: 0 auto;
+      padding: 20px;
+    }
+    
+    /* ボタンの基本スタイル */
+    .btn {
+      padding: 10px 20px;
+      border: none;
+      border-radius: 4px;
+      cursor: pointer;
+      font-size: 14px;
+    }
+    
+    .btn-primary {
+      background-color: #e50022;
+      color: white;
+    }
+    
+    /* スピナーアニメーション */
+    @keyframes spin {
+      0% { transform: rotate(0deg); }
+      100% { transform: rotate(360deg); }
+    }
+    
+    .spinner {
+      border: 4px solid rgba(0, 0, 0, 0.1);
+      border-radius: 50%;
+      border-top: 4px solid #e50022;
+      width: 40px;
+      height: 40px;
+      animation: spin 1s linear infinite;
+    }
+  
+        body { font-family: "FSEmeric", Arial, "Helvetica Neue", Helvetica, sans-serif; }
+        .react-root, .react-root select, .react-root input, .react-root textarea { font-family: "FSEmeric", Arial, "Helvetica Neue", Helvetica, sans-serif; }
+      </style>
+        
+        <!-- 外部CSSを遅延読み込み -->
+        <link rel="preload" href="/styles/SiteRenewal/Business/header.css" as="style" onload="this.onload=null;this.rel='stylesheet'">
+        
+        <link rel="preload" href="/styles/SiteRenewal/Business/layout.css" as="style" onload="this.onload=null;this.rel='stylesheet'"><noscript><link rel="stylesheet" href="/styles/SiteRenewal/Business/layout.css"></noscript>
+        
+        <!-- フォント用のnoscriptフォールバック -->
+        <noscript>
+          <link rel="stylesheet" href="/styles/SiteRenewal/Business/header.css" />
+          <link rel="stylesheet" href="/styles/SiteRenewal/Business/noscript.css" />
+        </noscript>
+      </head>
+      <body>
+        <!-- Google Tag Manager (noscript) -->
+        <noscript><iframe src="https://www.googletagmanager.com/ns.html?id=GTM-PRTZ8QW"
+        height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript>
+        <!-- End Google Tag Manager (noscript) -->
+        <div id="react-root"><!--$!--><template></template><!--/$--></div>
+        <script type="text/javascript">if (typeof _satellite !== "undefined") { _satellite.pageBottom();}</script>
+        <script id="vike_pageContext" type="application/json">{"pageProps":"!undefined","locale":"en-global","abortReason":"!undefined","_urlRewrite":null,"_urlRedirect":"!undefined","abortStatusCode":"!undefined","_abortCall":"!undefined","_pageContextInitIsPassedToClient":"!undefined","pageId":"/src/pages/pim/details","routeParams":{},"data":"!undefined"}</script>
+        <script src="/assets/entries/entry-client-routing.CAp7bBDh.js" type="module" async></script>
+        <link rel="modulepreload" href="/assets/entries/src_pages_pim_details.C6IqwWJh.js" as="script" type="text/javascript">
+        <link rel="modulepreload" href="/assets/chunks/chunk-3lZX8NVt.js" as="script" type="text/javascript">
+        <link rel="modulepreload" href="/assets/chunks/chunk-C4c85zTN.js" as="script" type="text/javascript">
+        <link rel="modulepreload" href="/assets/chunks/chunk-BOhWv5dm.js" as="script" type="text/javascript">
+      </body>
+    </html>

Datasheets/README.md

@@ -0,0 +1,18 @@
+# Component Datasheets
+
+This folder contains downloaded datasheets for all components in the project.
+
+Organized by component type:
+- **ICs/** - Integrated circuits (U references)
+- **Capacitors/** - Capacitors (C references)
+- **Resistors/** - Resistors (R references)
+- **Transistors/** - Transistors (Q references)
+- **Diodes/** - Diodes (D references)
+- **Connectors/** - Connectors (J, P references)
+- **Inductors/** - Inductors (L references)
+- And more...
+
+Files are named: REFERENCE_VALUE.pdf (e.g., U1_LM7805.pdf)
+
+Generated on: Tue Dec 16 10:27:44 UTC 2025
+Project: c64psu

Gerbers/c64psu-drill_map.gbr

@@ -0,0 +1,22 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,9.0.1+1*%
+%TF.CreationDate,2025-12-16T10:26:37+00:00*%
+%TF.ProjectId,c64psu,63363470-7375-42e6-9b69-6361645f7063,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,NonPlated,1,4,NPTH,Drill*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 9.0.1+1) date 2025-12-16 10:26:37*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%TA.AperFunction,ComponentDrill*%
+%ADD10C,2.400000*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J2*%
+X210980000Y-40940000D03*
+X210980000Y-55940000D03*
+M02*

Gerbers/c64psu-drill_report.txt

@@ -0,0 +1,31 @@
+Drill report for c64psu.kicad_pcb
+Created on 2025-12-16T10:26:37+0000
+
+Copper Layer Stackup:
+    =============================================================
+    L1 :  F.Cu                      front
+    L2 :  In1.Cu                    in1
+    L3 :  In2.Cu                    in2
+    L4 :  B.Cu                      back
+
+
+Drill file 'c64psu-PTH.drl' contains
+    plated through holes:
+    =============================================================
+    T1  0.300mm  0.0118"  (242 holes)
+    T2  0.650mm  0.0256"  (4 holes)  (with 4 slots)
+    T3  0.800mm  0.0315"  (16 holes)
+    T4  1.000mm  0.0394"  (12 holes)
+    T5  1.300mm  0.0512"  (9 holes)
+    T6  1.500mm  0.0591"  (10 holes)
+    T7  3.200mm  0.1260"  (3 holes)
+
+    Total plated holes count 296
+
+
+Drill file 'c64psu-NPTH.drl' contains
+    unplated through holes:
+    =============================================================
+    T1  2.400mm  0.0945"  (2 holes)
+
+    Total unplated holes count 2

Gerbers/c64psu-job.gbrjob

@@ -0,0 +1,185 @@
+{
+  "Header": {
+    "GenerationSoftware": {
+      "Vendor": "KiCad",
+      "Application": "Pcbnew",
+      "Version": "9.0.1+1"
+    },
+    "CreationDate": "2025-12-16T10:26:37+00:00"
+  },
+  "GeneralSpecs": {
+    "ProjectId": {
+      "Name": "c64psu",
+      "GUID": "63363470-7375-42e6-9b69-6361645f7063",
+      "Revision": "rev?"
+    },
+    "Size": {
+      "X": 86.2251,
+      "Y": 71.9422
+    },
+    "LayerNumber": 4,
+    "BoardThickness": 1.6,
+    "Finish": "None"
+  },
+  "DesignRules": [
+    {
+      "Layers": "Outer",
+      "PadToPad": 0.2,
+      "PadToTrack": 0.2,
+      "TrackToTrack": 0.2,
+      "MinLineWidth": 0.17,
+      "TrackToRegion": 0.2,
+      "RegionToRegion": 0.2
+    },
+    {
+      "Layers": "Inner",
+      "PadToPad": 0.2,
+      "PadToTrack": 0.2,
+      "TrackToTrack": 0.2,
+      "MinLineWidth": 0.21,
+      "TrackToRegion": 0.25,
+      "RegionToRegion": 0.25
+    }
+  ],
+  "FilesAttributes": [
+    {
+      "Path": "c64psuF_Cu.gbr",
+      "FileFunction": "Copper,L1,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuB_Cu.gbr",
+      "FileFunction": "Copper,L4,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuIn1_Cu.gbr",
+      "FileFunction": "Copper,L5,Inr",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuIn2_Cu.gbr",
+      "FileFunction": "Copper,L7,Inr",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuF_Paste.gbr",
+      "FileFunction": "SolderPaste,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuB_Paste.gbr",
+      "FileFunction": "SolderPaste,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuF_Silkscreen.gbr",
+      "FileFunction": "Legend,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuB_Silkscreen.gbr",
+      "FileFunction": "Legend,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuF_Mask.gbr",
+      "FileFunction": "SolderMask,Top",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "c64psuB_Mask.gbr",
+      "FileFunction": "SolderMask,Bot",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "c64psuEdge_Cuts.gbr",
+      "FileFunction": "Profile",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuUser_Comments.gbr",
+      "FileFunction": "Other,User",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuF_Fab.gbr",
+      "FileFunction": "AssemblyDrawing,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "c64psuB_Fab.gbr",
+      "FileFunction": "AssemblyDrawing,Bot",
+      "FilePolarity": "Positive"
+    }
+  ],
+  "MaterialStackup": [
+    {
+      "Type": "Legend",
+      "Name": "Top Silk Screen"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Top Solder Paste"
+    },
+    {
+      "Type": "SolderMask",
+      "Thickness": 0.01,
+      "Name": "Top Solder Mask"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "F.Cu"
+    },
+    {
+      "Type": "Dielectric",
+      "Thickness": 0.1,
+      "Material": "FR4",
+      "Name": "F.Cu/In1.Cu",
+      "Notes": "Type: dielectric layer 1 (from F.Cu to In1.Cu)"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "In1.Cu"
+    },
+    {
+      "Type": "Dielectric",
+      "Thickness": 1.24,
+      "Material": "FR4",
+      "Name": "In1.Cu/In2.Cu",
+      "Notes": "Type: dielectric layer 2 (from In1.Cu to In2.Cu)"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "In2.Cu"
+    },
+    {
+      "Type": "Dielectric",
+      "Thickness": 0.1,
+      "Material": "FR4",
+      "Name": "In2.Cu/B.Cu",
+      "Notes": "Type: dielectric layer 3 (from In2.Cu to B.Cu)"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "B.Cu"
+    },
+    {
+      "Type": "SolderMask",
+      "Thickness": 0.01,
+      "Name": "Bottom Solder Mask"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Bottom Solder Paste"
+    },
+    {
+      "Type": "Legend",
+      "Name": "Bottom Silk Screen"
+    }
+  ]
+}

Gerbers/c64psuEdge_Cuts.gbr

@@ -0,0 +1,31 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,9.0.1+1*
+G04 #@! TF.CreationDate,2025-12-16T10:26:37+00:00*
+G04 #@! TF.ProjectId,c64psu,63363470-7375-42e6-9b69-6361645f7063,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Profile,NP*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 9.0.1+1) date 2025-12-16 10:26:37*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 #@! TA.AperFunction,Profile*
+%ADD10C,0.050000*%
+G04 #@! TD*
+G04 APERTURE END LIST*
+D10*
+X219224551Y-37033468D02*
+X219250062Y-108900624D01*
+X133100087Y-108875624D01*
+X133075074Y-58400000D01*
+X139675000Y-58400000D01*
+X139675000Y-57800000D01*
+X139250000Y-57800000D01*
+X139250000Y-49750000D01*
+X139700000Y-49750000D01*
+X139700000Y-49150000D01*
+X133075000Y-49150000D01*
+X133075000Y-37008468D01*
+X219224551Y-37033468D01*
+M02*

Gerbers/c64psuNPTH_drill.drl

@@ -0,0 +1,17 @@
+M48
+; DRILL file {KiCad 9.0.1+1} date 2025-12-16T10:26:37+0000
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2025-12-16T10:26:37+00:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,9.0.1+1
+; #@! TF.FileFunction,NonPlated,1,4,NPTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T1C2.400
+%
+G90
+G05
+T1
+X210.98Y-40.94
+X210.98Y-55.94
+M30

Gerbers/c64psuPTH_drill.drl

@@ -0,0 +1,345 @@
+M48
+; DRILL file {KiCad 9.0.1+1} date 2025-12-16T10:26:37+0000
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2025-12-16T10:26:37+00:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,9.0.1+1
+; #@! TF.FileFunction,Plated,1,4,PTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,Plated,PTH,ViaDrill
+T1C0.300
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T2C0.650
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T3C0.800
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T4C1.000
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T5C1.300
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T6C1.500
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T7C3.200
+%
+G90
+G05
+T1
+X137.008Y-65.837
+X137.109Y-61.112
+X137.16Y-62.549
+X137.16Y-64.211
+X138.035Y-89.68
+X138.12Y-88.324
+X138.277Y-91.242
+X138.323Y-74.944
+X138.323Y-93.201
+X139.04Y-81.128
+X139.543Y-93.744
+X139.593Y-78.844
+X140.305Y-88.781
+X140.307Y-50.563
+X140.332Y-57.091
+X140.499Y-49.9
+X140.504Y-90.994
+X140.57Y-57.765
+X140.579Y-58.488
+X140.863Y-74.944
+X141.067Y-93.658
+X141.127Y-52.517
+X141.29Y-62.57
+X141.321Y-87.641
+X141.321Y-88.601
+X141.321Y-92.795
+X141.326Y-84.734
+X141.333Y-49.761
+X141.333Y-50.574
+X141.368Y-55.35
+X141.607Y-54.139
+X141.823Y-52.913
+X142.133Y-74.944
+X142.459Y-53.398
+X142.846Y-63.857
+X143.213Y-62.422
+X143.228Y-85.733
+X143.818Y-57.663
+X143.924Y-63.376
+X143.963Y-59.487
+X144.26Y-85.835
+X144.396Y-58.112
+X144.526Y-91.237
+X144.775Y-88.375
+X144.836Y-57.52
+X145.283Y-58.147
+X145.925Y-84.199
+X146.287Y-64.657
+X146.311Y-63.284
+X146.325Y-61.263
+X146.631Y-48.685
+X146.653Y-98.992
+X146.655Y-97.062
+X146.66Y-98.027
+X146.674Y-49.826
+X146.761Y-81.94
+X147.117Y-84.379
+X147.232Y-61.231
+X147.264Y-94.42
+X147.367Y-63.241
+X147.531Y-49.253
+X148.418Y-49.805
+X148.432Y-48.692
+X149.245Y-94.319
+X149.522Y-97.062
+X149.522Y-98.027
+X149.753Y-99.145
+X149.855Y-100.516
+X150.085Y-74.38
+X150.121Y-89.122
+X150.214Y-80.398
+X150.617Y-95.741
+X150.922Y-85.175
+X150.935Y-55.756
+X151.064Y-76.72
+X151.125Y-72.7
+X151.125Y-73.5
+X151.156Y-71.816
+X151.43Y-84.667
+X151.54Y-56.264
+X151.595Y-57.229
+X151.605Y-95.741
+X151.684Y-86.777
+X151.75Y-64.25
+X152.014Y-84.082
+X152.014Y-79.55
+X152.014Y-80.34
+X152.117Y-74.403
+X152.404Y-94.738
+X152.857Y-92.354
+X153.003Y-80.398
+X153.026Y-81.363
+X153.363Y-72.742
+X153.371Y-61.16
+X153.371Y-70.948
+X153.38Y-64.506
+X153.397Y-69.535
+X153.414Y-62.078
+X153.414Y-71.882
+X153.414Y-68.631
+X153.416Y-65.329
+X153.432Y-63.007
+X153.441Y-67.905
+X153.67Y-95.148
+X155.143Y-74.574
+X155.862Y-77.955
+X156.108Y-87.325
+X156.115Y-54.096
+X156.159Y-84.023
+X156.174Y-52.075
+X156.18Y-55.826
+X156.208Y-49.835
+X156.213Y-48.843
+X156.219Y-53.075
+X156.221Y-50.86
+X156.256Y-56.618
+X156.289Y-91.135
+X156.312Y-59.284
+X156.326Y-75.413
+X156.85Y-56.096
+X156.937Y-77.946
+X156.96Y-91.158
+X157.175Y-83.972
+X157.277Y-87.274
+X157.734Y-68.834
+X157.734Y-69.596
+X157.734Y-70.358
+X158.214Y-63.652
+X158.242Y-62.687
+X158.27Y-93.675
+X158.27Y-94.64
+X158.344Y-60.198
+X158.556Y-81.496
+X158.626Y-80.565
+X158.648Y-68.834
+X158.648Y-69.647
+X158.648Y-70.409
+X158.659Y-95.522
+X158.681Y-90.451
+X158.748Y-91.288
+X158.985Y-78.64
+X159.003Y-77.435
+X159.664Y-68.834
+X159.664Y-69.596
+X159.664Y-70.358
+X160.579Y-68.834
+X160.579Y-69.647
+X160.579Y-70.409
+X160.833Y-59.184
+X160.833Y-61.009
+X161.148Y-91.19
+X161.595Y-68.834
+X161.595Y-69.596
+X161.595Y-70.358
+X161.655Y-77.953
+X162.096Y-91.254
+X162.207Y-77.986
+X162.509Y-68.834
+X162.509Y-69.647
+X162.509Y-70.409
+X162.998Y-78.315
+X163.017Y-90.503
+X163.017Y-91.463
+X163.068Y-77.193
+X163.722Y-78.34
+X163.871Y-90.503
+X163.982Y-91.463
+X164.033Y-77.193
+X164.338Y-98.044
+X164.47Y-78.307
+X164.745Y-91.116
+X164.934Y-74.62
+X164.95Y-77.703
+X164.986Y-75.423
+X165.057Y-87.793
+X165.109Y-88.596
+X165.14Y-60.48
+X165.405Y-51.968
+X165.462Y-91.532
+X165.732Y-75.383
+X165.749Y-74.631
+X165.78Y-90.908
+X165.78Y-77.673
+X165.8Y-78.297
+X165.854Y-88.555
+X165.872Y-87.804
+X165.872Y-60.311
+X165.971Y-52.606
+X166.175Y-51.895
+X166.53Y-53.114
+X166.606Y-60.252
+X166.683Y-52.403
+X167.292Y-52.758
+X167.363Y-53.332
+X168.063Y-63.37
+X168.074Y-62.657
+X168.08Y-64.12
+X168.096Y-67.205
+X168.097Y-53.238
+X168.099Y-66.345
+X168.099Y-69.647
+X168.122Y-70.443
+X168.148Y-68.805
+X168.161Y-65.398
+X170.457Y-57.737
+X170.637Y-56.642
+X171.559Y-56.723
+X171.751Y-52.544
+X171.77Y-51.742
+X172.164Y-85.254
+X172.276Y-82.321
+X172.575Y-61.75
+X173.079Y-82.287
+X173.112Y-85.254
+X173.375Y-61.75
+X174.25Y-61.75
+X174.752Y-85.198
+X174.763Y-82.287
+X175.286Y-41.834
+X175.588Y-85.165
+X175.834Y-82.231
+X176.096Y-41.819
+X177.249Y-51.661
+X177.249Y-53.711
+X177.264Y-54.514
+X177.272Y-52.478
+X177.455Y-41.819
+X178.206Y-41.812
+X179.543Y-41.834
+X180.331Y-41.826
+X181.609Y-41.812
+X182.426Y-41.812
+X188.773Y-86.614
+X189.332Y-81.539
+X189.332Y-82.499
+X190.348Y-81.308
+X190.348Y-82.268
+X192.044Y-84.531
+X196.799Y-39.929
+X196.952Y-80.646
+X197.206Y-55.931
+X198.808Y-82.057
+T3
+X162.54Y-73.05
+X163.708Y-86.411
+X163.748Y-94.691
+X163.799Y-81.331
+X165.08Y-73.05
+X166.248Y-86.411
+X166.288Y-94.691
+X166.339Y-81.331
+X169.215Y-82.804
+X169.215Y-85.344
+X172.994Y-75.844
+X174.17Y-56.365
+X175.534Y-75.844
+X176.71Y-56.365
+X193.599Y-47.63
+X193.599Y-50.17
+T4
+X170.785Y-65.684
+X170.835Y-69.393
+X171.14Y-97.079
+X171.14Y-100.787
+X173.325Y-65.684
+X173.375Y-69.393
+X173.68Y-97.079
+X173.68Y-100.787
+X210.109Y-62.997
+X210.109Y-65.537
+X215.443Y-62.946
+X215.443Y-65.486
+T5
+X203.48Y-40.94
+X203.48Y-45.94
+X203.48Y-50.94
+X203.48Y-55.94
+X205.98Y-43.44
+X205.98Y-48.44
+X205.98Y-53.44
+X215.98Y-45.94
+X215.98Y-50.94
+T6
+X183.37Y-69.11
+X183.37Y-76.61
+X183.37Y-84.11
+X183.37Y-91.61
+X183.37Y-99.11
+X213.37Y-69.11
+X213.37Y-76.61
+X213.37Y-84.11
+X213.37Y-91.61
+X213.37Y-99.11
+T7
+X140.0Y-42.0
+X140.0Y-105.0
+X190.0Y-42.0
+T2
+G00X135.3Y-48.155
+M15
+G01X134.4Y-48.155
+M16
+G05
+G00X135.3Y-59.395
+M15
+G01X134.4Y-59.395
+M16
+G05
+G00X139.1Y-48.155
+M15
+G01X138.6Y-48.155
+M16
+G05
+G00X139.1Y-59.395
+M15
+G01X138.6Y-59.395
+M16
+G05
+M30

Gerbers/c64psuUser_Comments.gbr

@@ -0,0 +1,46 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,9.0.1+1*
+G04 #@! TF.CreationDate,2025-12-16T10:26:37+00:00*
+G04 #@! TF.ProjectId,c64psu,63363470-7375-42e6-9b69-6361645f7063,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Other,Comment*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 9.0.1+1) date 2025-12-16 10:26:37*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,0.150000*%
+G04 APERTURE END LIST*
+D10*
+X192800000Y-42000000D02*
+G75*
+G02*
+X187200000Y-42000000I-2800000J0D01*
+G01*
+X187200000Y-42000000D02*
+G75*
+G02*
+X192800000Y-42000000I2800000J0D01*
+G01*
+X142800000Y-105000000D02*
+G75*
+G02*
+X137200000Y-105000000I-2800000J0D01*
+G01*
+X137200000Y-105000000D02*
+G75*
+G02*
+X142800000Y-105000000I2800000J0D01*
+G01*
+X142800000Y-42000000D02*
+G75*
+G02*
+X137200000Y-42000000I-2800000J0D01*
+G01*
+X137200000Y-42000000D02*
+G75*
+G02*
+X142800000Y-42000000I2800000J0D01*
+G01*
+M02*

Interactive/c64psu-pcb-viewer.html

@@ -0,0 +1,34 @@
+<!DOCTYPE HTML>
+<html lang="en">
+  <body>
+    <script type="module" src="kicanvas.js"></script>
+    <div id="no_file_access" style="display: none; ">
+      <span>The browser can't read local files. Enable it to continue. I.e. use <i>--allow-file-access-from-files</i> on Chrome</span>
+    </div>
+    <kicanvas-embed controls="full">
+      <kicanvas-source src="c64psu.kicad_pcb"></kicanvas-source>
+    </kicanvas-embed>
+    <script>
+
+function ready()
+{
+ try
+   {
+    var xmlhttp = new XMLHttpRequest();
+    xmlhttp.open('GET', 'c64psu.kicad_pcb', false);
+    xmlhttp.send();
+   }
+ catch (error)
+   {
+    if (window.location.protocol === 'file:')
+      {
+       document.getElementById('no_file_access').style.display = 'block';
+      }
+    throw(error);
+   }
+}
+
+window.addEventListener('DOMContentLoaded', ready);
+    </script>
+  </body>
+</html>

Interactive/c64psu-project-viewer.html

@@ -0,0 +1,34 @@
+<!DOCTYPE HTML>
+<html lang="en">
+  <body>
+    <script type="module" src="kicanvas.js"></script>
+    <div id="no_file_access" style="display: none; ">
+      <span>The browser can't read local files. Enable it to continue. I.e. use <i>--allow-file-access-from-files</i> on Chrome</span>
+    </div>
+    <kicanvas-embed controls="full">
+      <kicanvas-source src="c64psu.kicad_pro"></kicanvas-source>
+    </kicanvas-embed>
+    <script>
+
+function ready()
+{
+ try
+   {
+    var xmlhttp = new XMLHttpRequest();
+    xmlhttp.open('GET', 'c64psu.kicad_pro', false);
+    xmlhttp.send();
+   }
+ catch (error)
+   {
+    if (window.location.protocol === 'file:')
+      {
+       document.getElementById('no_file_access').style.display = 'block';
+      }
+    throw(error);
+   }
+}
+
+window.addEventListener('DOMContentLoaded', ready);
+    </script>
+  </body>
+</html>

Interactive/c64psu-schematic-viewer.html

@@ -0,0 +1,34 @@
+<!DOCTYPE HTML>
+<html lang="en">
+  <body>
+    <script type="module" src="kicanvas.js"></script>
+    <div id="no_file_access" style="display: none; ">
+      <span>The browser can't read local files. Enable it to continue. I.e. use <i>--allow-file-access-from-files</i> on Chrome</span>
+    </div>
+    <kicanvas-embed controls="full">
+      <kicanvas-source src="c64psu.kicad_sch"></kicanvas-source>
+    </kicanvas-embed>
+    <script>
+
+function ready()
+{
+ try
+   {
+    var xmlhttp = new XMLHttpRequest();
+    xmlhttp.open('GET', 'c64psu.kicad_sch', false);
+    xmlhttp.send();
+   }
+ catch (error)
+   {
+    if (window.location.protocol === 'file:')
+      {
+       document.getElementById('no_file_access').style.display = 'block';
+      }
+    throw(error);
+   }
+}
+
+window.addEventListener('DOMContentLoaded', ready);
+    </script>
+  </body>
+</html>

Interactive/c64psu.kicad_prl

@@ -2,7 +2,7 @@
   "board": {
     "active_layer": 0,
     "active_layer_preset": "",
-    "auto_track_width": true,
+    "auto_track_width": false,
     "hidden_netclasses": [],
     "hidden_nets": [],
     "high_contrast_mode": 0,

Interactive/c64psu.kicad_pro

@@ -84,39 +84,23 @@
           ""
         ],
         [
-          "lib_footprint_mismatch|154120000|84380000|82b53257-714f-4a38-9401-251c62860104|00000000-0000-0000-0000-000000000000",
+          "lib_footprint_mismatch|154947500|57749800|4089365a-2a9f-4c5c-8e56-f7b17c5cbd66|00000000-0000-0000-0000-000000000000",
           ""
         ],
         [
-          "lib_footprint_mismatch|156510000|82769999|4621108a-931c-45ef-9556-bc692d576f45|00000000-0000-0000-0000-000000000000",
+          "lib_footprint_mismatch|158256100|60147200|1cf5e456-6e0f-4cc0-b290-43ee714eb81e|00000000-0000-0000-0000-000000000000",
           ""
         ],
         [
-          "lib_footprint_mismatch|157343000|53682550|4089365a-2a9f-4c5c-8e56-f7b17c5cbd66|00000000-0000-0000-0000-000000000000",
+          "lib_footprint_mismatch|158764200|90435200|8405dbbc-7c76-4d9e-982c-7997bd888ccf|00000000-0000-0000-0000-000000000000",
           ""
         ],
         [
-          "lib_footprint_mismatch|159870000|94210001|1a2b3a4d-0ce4-4839-84fa-d97eb5e401f7|00000000-0000-0000-0000-000000000000",
+          "lib_footprint_mismatch|158800800|77252600|0ed65a98-b122-48d4-8170-cba8e676127b|00000000-0000-0000-0000-000000000000",
           ""
         ],
         [
-          "lib_footprint_mismatch|160330000|84445000|4cf42998-2ce7-4300-957c-40d807f36117|00000000-0000-0000-0000-000000000000",
+          "lib_footprint_mismatch|169214800|84094000|58b940db-2a87-4845-a822-214f810b512e|00000000-0000-0000-0000-000000000000",
-          ""
-        ],
-        [
-          "lib_footprint_mismatch|170560000|99890000|c0509443-0a46-414a-95a3-6ccf7e93e714|00000000-0000-0000-0000-000000000000",
-          ""
-        ],
-        [
-          "lib_footprint_mismatch|171880000|90002501|b6a5d7c3-440b-4628-a7bf-7265f691c709|00000000-0000-0000-0000-000000000000",
-          ""
-        ],
-        [
-          "lib_footprint_mismatch|172430000|73010000|fe196612-287b-4e45-ac21-3a149b0ae018|00000000-0000-0000-0000-000000000000",
-          ""
-        ],
-        [
-          "lib_footprint_mismatch|173626001|84890000|ffaaa5ce-33e3-4c61-857e-0019cf77aee1|00000000-0000-0000-0000-000000000000",
           ""
         ],
         [
@@ -128,7 +112,7 @@
           ""
         ],
         [
-          "lib_footprint_mismatch|199745600|83094700|b085309a-34f8-4979-822d-d3f895291474|00000000-0000-0000-0000-000000000000",
+          "lib_footprint_mismatch|199694800|83108800|b085309a-34f8-4979-822d-d3f895291474|00000000-0000-0000-0000-000000000000",
           ""
         ]
       ],

JLCPCB/c64psuEdge_Cuts.gm1

@@ -0,0 +1,44 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,9.0.1+1*
+G04 #@! TF.CreationDate,2025-12-16T10:27:43+00:00*
+G04 #@! TF.ProjectId,c64psu,63363470-7375-42e6-9b69-6361645f7063,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Profile,NP*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 9.0.1+1) date 2025-12-16 10:27:43*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 #@! TA.AperFunction,Profile*
+%ADD10C,0.050000*%
+G04 #@! TD*
+G04 APERTURE END LIST*
+D10*
+X219224551Y-37033468D02*
+X219250062Y-108900624D01*
+X133100087Y-108875624D01*
+X133075074Y-58400000D01*
+X139675000Y-58400000D01*
+X139675000Y-57800000D01*
+X139250000Y-57800000D01*
+X139250000Y-49750000D01*
+X139700000Y-49750000D01*
+X139700000Y-49150000D01*
+X133075000Y-49150000D01*
+X133075000Y-37008468D01*
+X219224551Y-37033468D01*
+X219224551Y-37033468D02*
+X219250062Y-108900624D01*
+X133100087Y-108875624D01*
+X133075074Y-58400000D01*
+X139675000Y-58400000D01*
+X139675000Y-57800000D01*
+X139250000Y-57800000D01*
+X139250000Y-49750000D01*
+X139700000Y-49750000D01*
+X139700000Y-49150000D01*
+X133075000Y-49150000D01*
+X133075000Y-37008468D01*
+X219224551Y-37033468D01*
+M02*

JLCPCB/c64psuNPTH_drill.drl

@@ -0,0 +1,17 @@
+M48
+; DRILL file {KiCad 9.0.1+1} date 2025-12-16T10:27:43+0000
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2025-12-16T10:27:43+00:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,9.0.1+1
+; #@! TF.FileFunction,NonPlated,1,4,NPTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T1C2.400
+%
+G90
+G05
+T1
+X210.98Y-40.94
+X210.98Y-55.94
+M30

JLCPCB/c64psuPTH_drill.drl

@@ -0,0 +1,345 @@
+M48
+; DRILL file {KiCad 9.0.1+1} date 2025-12-16T10:27:43+0000
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2025-12-16T10:27:43+00:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,9.0.1+1
+; #@! TF.FileFunction,Plated,1,4,PTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,Plated,PTH,ViaDrill
+T1C0.300
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T2C0.650
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T3C0.800
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T4C1.000
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T5C1.300
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T6C1.500
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T7C3.200
+%
+G90
+G05
+T1
+X137.008Y-65.837
+X137.109Y-61.112
+X137.16Y-62.549
+X137.16Y-64.211
+X138.035Y-89.68
+X138.12Y-88.324
+X138.277Y-91.242
+X138.323Y-74.944
+X138.323Y-93.201
+X139.04Y-81.128
+X139.543Y-93.744
+X139.593Y-78.844
+X140.305Y-88.781
+X140.307Y-50.563
+X140.332Y-57.091
+X140.499Y-49.9
+X140.504Y-90.994
+X140.57Y-57.765
+X140.579Y-58.488
+X140.863Y-74.944
+X141.067Y-93.658
+X141.127Y-52.517
+X141.29Y-62.57
+X141.321Y-87.641
+X141.321Y-88.601
+X141.321Y-92.795
+X141.326Y-84.734
+X141.333Y-49.761
+X141.333Y-50.574
+X141.368Y-55.35
+X141.607Y-54.139
+X141.823Y-52.913
+X142.133Y-74.944
+X142.459Y-53.398
+X142.846Y-63.857
+X143.213Y-62.422
+X143.228Y-85.733
+X143.818Y-57.663
+X143.924Y-63.376
+X143.963Y-59.487
+X144.26Y-85.835
+X144.396Y-58.112
+X144.526Y-91.237
+X144.775Y-88.375
+X144.836Y-57.52
+X145.283Y-58.147
+X145.925Y-84.199
+X146.287Y-64.657
+X146.311Y-63.284
+X146.325Y-61.263
+X146.631Y-48.685
+X146.653Y-98.992
+X146.655Y-97.062
+X146.66Y-98.027
+X146.674Y-49.826
+X146.761Y-81.94
+X147.117Y-84.379
+X147.232Y-61.231
+X147.264Y-94.42
+X147.367Y-63.241
+X147.531Y-49.253
+X148.418Y-49.805
+X148.432Y-48.692
+X149.245Y-94.319
+X149.522Y-97.062
+X149.522Y-98.027
+X149.753Y-99.145
+X149.855Y-100.516
+X150.085Y-74.38
+X150.121Y-89.122
+X150.214Y-80.398
+X150.617Y-95.741
+X150.922Y-85.175
+X150.935Y-55.756
+X151.064Y-76.72
+X151.125Y-72.7
+X151.125Y-73.5
+X151.156Y-71.816
+X151.43Y-84.667
+X151.54Y-56.264
+X151.595Y-57.229
+X151.605Y-95.741
+X151.684Y-86.777
+X151.75Y-64.25
+X152.014Y-84.082
+X152.014Y-79.55
+X152.014Y-80.34
+X152.117Y-74.403
+X152.404Y-94.738
+X152.857Y-92.354
+X153.003Y-80.398
+X153.026Y-81.363
+X153.363Y-72.742
+X153.371Y-61.16
+X153.371Y-70.948
+X153.38Y-64.506
+X153.397Y-69.535
+X153.414Y-62.078
+X153.414Y-71.882
+X153.414Y-68.631
+X153.416Y-65.329
+X153.432Y-63.007
+X153.441Y-67.905
+X153.67Y-95.148
+X155.143Y-74.574
+X155.862Y-77.955
+X156.108Y-87.325
+X156.115Y-54.096
+X156.159Y-84.023
+X156.174Y-52.075
+X156.18Y-55.826
+X156.208Y-49.835
+X156.213Y-48.843
+X156.219Y-53.075
+X156.221Y-50.86
+X156.256Y-56.618
+X156.289Y-91.135
+X156.312Y-59.284
+X156.326Y-75.413
+X156.85Y-56.096
+X156.937Y-77.946
+X156.96Y-91.158
+X157.175Y-83.972
+X157.277Y-87.274
+X157.734Y-68.834
+X157.734Y-69.596
+X157.734Y-70.358
+X158.214Y-63.652
+X158.242Y-62.687
+X158.27Y-93.675
+X158.27Y-94.64
+X158.344Y-60.198
+X158.556Y-81.496
+X158.626Y-80.565
+X158.648Y-68.834
+X158.648Y-69.647
+X158.648Y-70.409
+X158.659Y-95.522
+X158.681Y-90.451
+X158.748Y-91.288
+X158.985Y-78.64
+X159.003Y-77.435
+X159.664Y-68.834
+X159.664Y-69.596
+X159.664Y-70.358
+X160.579Y-68.834
+X160.579Y-69.647
+X160.579Y-70.409
+X160.833Y-59.184
+X160.833Y-61.009
+X161.148Y-91.19
+X161.595Y-68.834
+X161.595Y-69.596
+X161.595Y-70.358
+X161.655Y-77.953
+X162.096Y-91.254
+X162.207Y-77.986
+X162.509Y-68.834
+X162.509Y-69.647
+X162.509Y-70.409
+X162.998Y-78.315
+X163.017Y-90.503
+X163.017Y-91.463
+X163.068Y-77.193
+X163.722Y-78.34
+X163.871Y-90.503
+X163.982Y-91.463
+X164.033Y-77.193
+X164.338Y-98.044
+X164.47Y-78.307
+X164.745Y-91.116
+X164.934Y-74.62
+X164.95Y-77.703
+X164.986Y-75.423
+X165.057Y-87.793
+X165.109Y-88.596
+X165.14Y-60.48
+X165.405Y-51.968
+X165.462Y-91.532
+X165.732Y-75.383
+X165.749Y-74.631
+X165.78Y-90.908
+X165.78Y-77.673
+X165.8Y-78.297
+X165.854Y-88.555
+X165.872Y-87.804
+X165.872Y-60.311
+X165.971Y-52.606
+X166.175Y-51.895
+X166.53Y-53.114
+X166.606Y-60.252
+X166.683Y-52.403
+X167.292Y-52.758
+X167.363Y-53.332
+X168.063Y-63.37
+X168.074Y-62.657
+X168.08Y-64.12
+X168.096Y-67.205
+X168.097Y-53.238
+X168.099Y-66.345
+X168.099Y-69.647
+X168.122Y-70.443
+X168.148Y-68.805
+X168.161Y-65.398
+X170.457Y-57.737
+X170.637Y-56.642
+X171.559Y-56.723
+X171.751Y-52.544
+X171.77Y-51.742
+X172.164Y-85.254
+X172.276Y-82.321
+X172.575Y-61.75
+X173.079Y-82.287
+X173.112Y-85.254
+X173.375Y-61.75
+X174.25Y-61.75
+X174.752Y-85.198
+X174.763Y-82.287
+X175.286Y-41.834
+X175.588Y-85.165
+X175.834Y-82.231
+X176.096Y-41.819
+X177.249Y-51.661
+X177.249Y-53.711
+X177.264Y-54.514
+X177.272Y-52.478
+X177.455Y-41.819
+X178.206Y-41.812
+X179.543Y-41.834
+X180.331Y-41.826
+X181.609Y-41.812
+X182.426Y-41.812
+X188.773Y-86.614
+X189.332Y-81.539
+X189.332Y-82.499
+X190.348Y-81.308
+X190.348Y-82.268
+X192.044Y-84.531
+X196.799Y-39.929
+X196.952Y-80.646
+X197.206Y-55.931
+X198.808Y-82.057
+T3
+X162.54Y-73.05
+X163.708Y-86.411
+X163.748Y-94.691
+X163.799Y-81.331
+X165.08Y-73.05
+X166.248Y-86.411
+X166.288Y-94.691
+X166.339Y-81.331
+X169.215Y-82.804
+X169.215Y-85.344
+X172.994Y-75.844
+X174.17Y-56.365
+X175.534Y-75.844
+X176.71Y-56.365
+X193.599Y-47.63
+X193.599Y-50.17
+T4
+X170.785Y-65.684
+X170.835Y-69.393
+X171.14Y-97.079
+X171.14Y-100.787
+X173.325Y-65.684
+X173.375Y-69.393
+X173.68Y-97.079
+X173.68Y-100.787
+X210.109Y-62.997
+X210.109Y-65.537
+X215.443Y-62.946
+X215.443Y-65.486
+T5
+X203.48Y-40.94
+X203.48Y-45.94
+X203.48Y-50.94
+X203.48Y-55.94
+X205.98Y-43.44
+X205.98Y-48.44
+X205.98Y-53.44
+X215.98Y-45.94
+X215.98Y-50.94
+T6
+X183.37Y-69.11
+X183.37Y-76.61
+X183.37Y-84.11
+X183.37Y-91.61
+X183.37Y-99.11
+X213.37Y-69.11
+X213.37Y-76.61
+X213.37Y-84.11
+X213.37Y-91.61
+X213.37Y-99.11
+T7
+X140.0Y-42.0
+X140.0Y-105.0
+X190.0Y-42.0
+T2
+G00X135.3Y-48.155
+M15
+G01X134.4Y-48.155
+M16
+G05
+G00X135.3Y-59.395
+M15
+G01X134.4Y-59.395
+M16
+G05
+G00X139.1Y-48.155
+M15
+G01X138.6Y-48.155
+M16
+G05
+G00X139.1Y-59.395
+M15
+G01X138.6Y-59.395
+M16
+G05
+M30

board_info.txt

@@ -0,0 +1,5 @@
+Board configuration: 4 layers
+Project: c64psu
+Project path: ./kicad/c64psu
+Generated on: Tue Dec 16 10:27:44 UTC 2025
+Commit: e9775f2ce78dc286cf8bec8b3a4b339598700a0a

c64psu-report.txt

@@ -0,0 +1,155 @@
+# PCB
+
+Board size: 86.18x71.89 mm (3.39x2.83 inches)
+
+- This is the size of the rectangle that contains the board
+- Thickness: 1.6 mm (63 mils)
+- Material: FR4
+- Finish: None
+- Layers: 4
+- Copper thickness: 35 µm
+
+Solder mask: TOP / BOTTOM
+
+- Color: Green
+
+Silk screen: TOP / BOTTOM
+
+- Color: White
+
+
+Stackup:
+
+| Name                 | Type                 | Color            | Thickness [µm]| Material        | Er        | Loss tan     |
+|----------------------|----------------------|------------------|---------------|-----------------|-----------|--------------|
+| F.SilkS              | Top Silk Screen      |                  |               |                 |           |              |
+| F.Paste              | Top Solder Paste     |                  |               |                 |           |              |
+| F.Mask               | Top Solder Mask      |                  |            10 |                 |           |              |
+| F.Cu                 | copper               |                  |            35 |                 |           |              |
+| dielectric 1         | prepreg              |                  |           100 | FR4             |       4.5 |        0.020 |
+| In1.Cu               | copper               |                  |            35 |                 |           |              |
+| dielectric 2         | core                 |                  |          1240 | FR4             |       4.5 |        0.020 |
+| In2.Cu               | copper               |                  |            35 |                 |           |              |
+| dielectric 3         | prepreg              |                  |           100 | FR4             |       4.5 |        0.020 |
+| B.Cu                 | copper               |                  |            35 |                 |           |              |
+| B.Mask               | Bottom Solder Mask   |                  |            10 |                 |           |              |
+| B.Paste              | Bottom Solder Paste  |                  |               |                 |           |              |
+| B.SilkS              | Bottom Silk Screen   |                  |               |                 |           |              |
+
+# Important sizes
+
+Clearance: 0.2 mm (8 mils)
+
+Track width: 0.17 mm (7 mils)
+
+- By design rules: 0.0 mm (0 mils)
+
+Drill: 0.4 mm (16 mils)
+
+- Vias: 0.4 mm (16 mils) [Design: 0.4 mm (16 mils)]
+- Pads: 0.75 mm (30 mils)
+- The above values are real drill sizes, they add 0.1 mm (4 mils) to plated holes (PTH)
+
+Via: 0.6/0.3 mm (24/12 mils)
+
+- By design rules: 0.5/0.3 mm (20/12 mils)
+- Micro via: yes [0.2/0.1 mm (8/4 mils)]
+- Buried/blind via: yes
+- Total: 242 (thru: 242 buried/blind: 0 micro: 0)
+
+Outer Annular Ring: 0.1 mm (4 mils)
+
+- By design rules: 0.15 mm (6 mils)
+
+Eurocircuits class: 6C
+- Using min drill 0.35 mm for an OAR of 0.13 mm
+
+
+# General stats
+
+Components count: (SMD/THT)
+
+- Top: 87/6 (SMD + THT)
+- Bottom: 23/2 (SMD + THT)
+
+Defined tracks:
+
+- 0.17 mm (7 mils)
+- 0.21 mm (8 mils)
+- 0.3 mm (12 mils)
+- 0.4 mm (16 mils)
+- 0.6 mm (24 mils)
+- 0.8 mm (31 mils)
+- 1.0 mm (39 mils)
+- 1.5 mm (59 mils)
+- 2.0 mm (79 mils)
+
+Used tracks:
+
+- 0.17 mm (7 mils) (43) defined: yes
+- 0.21 mm (8 mils) (150) defined: yes
+- 0.3 mm (12 mils) (193) defined: yes
+- 0.4 mm (16 mils) (16) defined: yes
+- 0.6 mm (24 mils) (52) defined: yes
+- 0.8 mm (31 mils) (39) defined: yes
+- 1.0 mm (39 mils) (83) defined: yes
+- 1.5 mm (59 mils) (58) defined: yes
+- 2.0 mm (79 mils) (2) defined: yes
+
+Defined vias:
+
+
+Used vias:
+
+- 0.6/0.3 mm (24/12 mils) (Count: 242, Aspect: 2.7 A) defined: no
+
+Holes (excluding vias):
+
+- 0.8 mm (31 mils) (16)
+- 1.0 mm (39 mils) (12)
+- 1.3 mm (51 mils) (9)
+- 1.5 mm (59 mils) (10)
+- 2.4 mm (94 mils) (2)
+- 3.2 mm (126 mils) (3)
+
+Oval holes:
+
+- 0.65x1.15 mm (26x45 mils) (2)
+- 0.65x1.55 mm (26x61 mils) (2)
+
+Drill tools (including vias and computing adjusts and rounding):
+
+- 0.4 mm (16 mils) (242)
+- 0.75 mm (30 mils) (4)
+- 0.9 mm (35 mils) (16)
+- 1.1 mm (43 mils) (12)
+- 1.4 mm (55 mils) (9)
+- 1.6 mm (63 mils) (10)
+- 2.4 mm (94 mils) (2)
+- 3.3 mm (130 mils) (3)
+
+Solder paste stats:
+
+Using a paste with 87.75 % alloy, that has an specific gravity for the alloy of 7.4 g/cm³
+and 1.0 g/cm³ for the flux. This paste has an specific gravity of  4.15 g/cm³.
+
+The stencil thickness is  0.12 mm.
+
+| Side   | Pads with paste | Area [mm²] | Paste [g] |
+|--------|-----------------|------------|-----------|
+| Top    |             284 |     308.02 |      1.53 |
+| Bottom |              53 |      69.05 |      0.34 |
+| Total  |             337 |     377.08 |      1.88 |
+
+Note: this is just an approximation to the theoretical value. Margins of the solder mask and waste aren't computed.
+
+# Schematic
+
+![Schematic SVG](Schematic/c64psu-schematic.svg){ width=16.5cm height=11.7cm }
+
+
+
+# PCB Layers
+
+![PCB PDF](PCB/PDF/c64psu-pcb.pdf){ width=16.5cm height=11.7cm }
+

code/.cproject

@@ -1,176 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
-	<storageModule moduleId="org.eclipse.cdt.core.settings">
-		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584" moduleId="org.eclipse.cdt.core.settings" name="Debug">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
-					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584." name="/" resourcePath="">
-						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.8708178" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.675350171" name="MCU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32G474CBTx" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1396998678" name="CPU" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.228321373" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.246627769" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.569851536" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.493855913" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1904983327" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32G474CBTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../Drivers/STM32G4xx_HAL_Driver/Inc | ../Drivers/STM32G4xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32G4xx/Include | ../Drivers/CMSIS/Include ||  ||  || USE_HAL_DRIVER | STM32G474xx ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32G474CBTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None ||  ||  || " valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1640224048" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="170" valueType="string"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1281027497" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
-							<builder buildPath="${workspace_loc:/C64PSU}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.735311501" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.2006906671" name="MCU/MPU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1855830196" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.157180494" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
-									<listOptionValue builtIn="false" value="DEBUG"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.1912403188" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1629961419" name="MCU/MPU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.381323083" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.1032522822" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1506700134" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
-									<listOptionValue builtIn="false" value="DEBUG"/>
-									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
-									<listOptionValue builtIn="false" value="STM32G474xx"/>
-								</option>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.505082228" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
-									<listOptionValue builtIn="false" value="../Core/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32G4xx_HAL_Driver/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32G4xx_HAL_Driver/Inc/Legacy"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32G4xx/Include"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1739233053" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.1959465196" name="MCU/MPU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1328862026" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1658628852" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.874144747" name="MCU/MPU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.805491319" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32G474CBTX_FLASH.ld}" valueType="string"/>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.2086841037" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.742594965" name="MCU/MPU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.447884668" name="MCU/MPU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.2084313060" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.166942023" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1628172650" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1928881817" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1224520690" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1009979057" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.72889785" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
-						</toolChain>
-					</folderInfo>
-					<sourceEntries>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
-					</sourceEntries>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-		<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572" moduleId="org.eclipse.cdt.core.settings" name="Release">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
-					<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572." name="/" resourcePath="">
-						<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.353202695" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.247084598" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="true" value="STM32G474CBTx" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1792927124" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.1582475621" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.636128663" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv4-sp-d16" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1043717698" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="true" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.740239677" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.382897756" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || STM32G474CBTx || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Core/Inc | ../Drivers/STM32G4xx_HAL_Driver/Inc | ../Drivers/STM32G4xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32G4xx/Include | ../Drivers/CMSIS/Include ||  ||  || USE_HAL_DRIVER | STM32G474xx ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32G474CBTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None ||  ||  || " valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.1137781942" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="170" valueType="string"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1467828888" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
-							<builder buildPath="${workspace_loc:/C64PSU}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1030449639" managedBuildOn="true" name="Gnu Make Builder.Release" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.819839422" name="MCU/MPU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1416770793" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.1009335607" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1435282348" name="MCU/MPU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.2052750479" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.271396770" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.872682043" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
-									<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
-									<listOptionValue builtIn="false" value="STM32G474xx"/>
-								</option>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.81271307" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
-									<listOptionValue builtIn="false" value="../Core/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32G4xx_HAL_Driver/Inc"/>
-									<listOptionValue builtIn="false" value="../Drivers/STM32G4xx_HAL_Driver/Inc/Legacy"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32G4xx/Include"/>
-									<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
-								</option>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.159999454" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.23676458" name="MCU/MPU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1762026445" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1557761898" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.583093127" name="MCU/MPU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
-								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.740573275" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32G474CBTX_FLASH.ld}" valueType="string"/>
-								<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.1525614507" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1015339789" name="MCU/MPU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1322389031" name="MCU/MPU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1409667175" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.432060545" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.743066654" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.2107066322" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1032671562" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1815606098" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
-							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.389915405" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
-						</toolChain>
-					</folderInfo>
-					<sourceEntries>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
-						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
-					</sourceEntries>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-		</cconfiguration>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.pathentry"/>
-	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-		<project id="C64PSU.null.1845114449" name="C64PSU"/>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
-	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
-	<storageModule moduleId="scannerConfiguration">
-		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1629961419;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.1739233053">
-			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-		<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1435282348;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.159999454">
-			<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-	</storageModule>
-</cproject>

code/.project

@@ -1,32 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<projectDescription>
-	<name>C64PSU</name>
-	<comment></comment>
-	<projects>
-	</projects>
-	<buildSpec>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
-			<triggers>clean,full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
-			<triggers>full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-	</buildSpec>
-	<natures>
-		<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
-		<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
-		<nature>org.eclipse.cdt.core.cnature</nature>
-		<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
-		<nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
-		<nature>com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature</nature>
-		<nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
-	</natures>
-</projectDescription>

code/.settings/language.settings.xml

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<project>
-	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.65797584" name="Debug">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1564881755989101936" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-	<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1348968572" name="Release">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1564881755989101936" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-</project>

code/.settings/stm32cubeide.project.prefs

@@ -1,4 +0,0 @@
-635E684B79701B039C64EA45C3F84D30=A303B722E829A74A50F19E28DBC37946
-66BE74F758C12D739921AEA421D593D3=3
-DC22A860405A8BF2F2C095E5B6529F12=030A9442AEB48217A304EB6A045F69AD
-eclipse.preferences.version=1

code/C64PSU.ioc

@@ -1,229 +0,0 @@
-#MicroXplorer Configuration settings - do not modify
-ADC3.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_5
-ADC3.CommonPathInternal=null|null|null|null
-ADC3.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,CommonPathInternal
-ADC3.NbrOfConversionFlag=1
-ADC3.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
-ADC3.Rank-0\#ChannelRegularConversion=1
-ADC3.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
-ADC3.master=1
-ADC4.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_4
-ADC4.CommonPathInternal=null|null|null|null
-ADC4.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,CommonPathInternal
-ADC4.NbrOfConversionFlag=1
-ADC4.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
-ADC4.Rank-0\#ChannelRegularConversion=1
-ADC4.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
-CAD.formats=
-CAD.pinconfig=
-CAD.provider=
-DAC1.DAC_Channel-DAC_OUT2_Int=DAC_CHANNEL_2
-DAC1.IPParameters=DAC_Channel-DAC_OUT2_Int
-File.Version=6
-HRTIM1.Event_EEV1=HRTIM_EVENT_1
-HRTIM1.IPParameters=SyncOptions,Event_EEV1
-HRTIM1.SyncOptions=HRTIM_SYNCOPTION_NONE
-KeepUserPlacement=false
-Mcu.CPN=STM32G474CBT6TR
-Mcu.Family=STM32G4
-Mcu.IP0=ADC3
-Mcu.IP1=ADC4
-Mcu.IP10=RCC
-Mcu.IP11=SYS
-Mcu.IP12=TIM1
-Mcu.IP13=USART1
-Mcu.IP2=COMP5
-Mcu.IP3=COMP7
-Mcu.IP4=CORDIC
-Mcu.IP5=DAC1
-Mcu.IP6=DAC4
-Mcu.IP7=FMAC
-Mcu.IP8=HRTIM1
-Mcu.IP9=NVIC
-Mcu.IPNb=14
-Mcu.Name=STM32G474C(B-C-E)Tx
-Mcu.Package=LQFP48
-Mcu.Pin0=PF0-OSC_IN
-Mcu.Pin1=PF1-OSC_OUT
-Mcu.Pin10=PA15
-Mcu.Pin11=PB3
-Mcu.Pin12=PB6
-Mcu.Pin13=PB7
-Mcu.Pin14=VP_COMP5_VS_DAC1OUT2
-Mcu.Pin15=VP_COMP7_VS_DAC4OUT1
-Mcu.Pin16=VP_CORDIC_VS_CORDIC
-Mcu.Pin17=VP_DAC1_VS_DACI2
-Mcu.Pin18=VP_DAC4_VS_DACI1
-Mcu.Pin19=VP_FMAC_VS_FMAC
-Mcu.Pin2=PB13
-Mcu.Pin20=VP_HRTIM1_VS_hrtimMasterTimerNoOutput
-Mcu.Pin21=VP_SYS_V_VREFBUF
-Mcu.Pin22=VP_SYS_VS_Systick
-Mcu.Pin23=VP_SYS_VS_DBSignals
-Mcu.Pin24=VP_TIM1_VS_ClockSourceINT
-Mcu.Pin3=PB14
-Mcu.Pin4=PA8
-Mcu.Pin5=PA9
-Mcu.Pin6=PA10
-Mcu.Pin7=PA11
-Mcu.Pin8=PA13
-Mcu.Pin9=PA14
-Mcu.PinsNb=25
-Mcu.ThirdPartyNb=0
-Mcu.UserConstants=
-Mcu.UserName=STM32G474CBTx
-MxCube.Version=6.15.0
-MxDb.Version=DB.6.0.150
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.ForceEnableDMAVector=true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-PA10.Mode=Output_TB1TB2
-PA10.Signal=HRTIM1_CHB1
-PA11.Mode=Output_TB1TB2
-PA11.Signal=HRTIM1_CHB2
-PA13.Mode=JTAG_4_pins
-PA13.Signal=SYS_JTMS-SWDIO
-PA14.Mode=JTAG_4_pins
-PA14.Signal=SYS_JTCK-SWCLK
-PA15.Mode=JTAG_4_pins
-PA15.Signal=SYS_JTDI
-PA8.Mode=Output_TA1TA2
-PA8.Signal=HRTIM1_CHA1
-PA9.Mode=Output_TA1TA2
-PA9.Signal=HRTIM1_CHA2
-PB13.Locked=true
-PB13.Signal=SharedAnalog_PB13
-PB14.Locked=true
-PB14.Signal=SharedAnalog_PB14
-PB3.Mode=JTAG_4_pins
-PB3.Signal=SYS_JTDO-SWO
-PB6.Locked=true
-PB6.Mode=Asynchronous
-PB6.Signal=USART1_TX
-PB7.Locked=true
-PB7.Mode=Asynchronous
-PB7.Signal=USART1_RX
-PF0-OSC_IN.Mode=HSE-External-Oscillator
-PF0-OSC_IN.Signal=RCC_OSC_IN
-PF1-OSC_OUT.Mode=HSE-External-Oscillator
-PF1-OSC_OUT.Signal=RCC_OSC_OUT
-PinOutPanel.RotationAngle=0
-ProjectManager.AskForMigrate=true
-ProjectManager.BackupPrevious=false
-ProjectManager.CompilerLinker=GCC
-ProjectManager.CompilerOptimize=6
-ProjectManager.ComputerToolchain=false
-ProjectManager.CoupleFile=false
-ProjectManager.CustomerFirmwarePackage=
-ProjectManager.DefaultFWLocation=true
-ProjectManager.DeletePrevious=true
-ProjectManager.DeviceId=STM32G474CBTx
-ProjectManager.FirmwarePackage=STM32Cube FW_G4 V1.6.1
-ProjectManager.FreePins=false
-ProjectManager.HalAssertFull=false
-ProjectManager.HeapSize=0x200
-ProjectManager.KeepUserCode=true
-ProjectManager.LastFirmware=true
-ProjectManager.LibraryCopy=1
-ProjectManager.MainLocation=Core/Src
-ProjectManager.NoMain=false
-ProjectManager.PreviousToolchain=
-ProjectManager.ProjectBuild=false
-ProjectManager.ProjectFileName=C64PSU.ioc
-ProjectManager.ProjectName=C64PSU
-ProjectManager.ProjectStructure=
-ProjectManager.RegisterCallBack=
-ProjectManager.StackSize=0x400
-ProjectManager.TargetToolchain=STM32CubeIDE
-ProjectManager.ToolChainLocation=
-ProjectManager.UAScriptAfterPath=
-ProjectManager.UAScriptBeforePath=
-ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_TIM1_Init-TIM1-false-HAL-true,4-MX_CORDIC_Init-CORDIC-false-HAL-true,5-MX_FMAC_Init-FMAC-false-HAL-true,6-MX_ADC3_Init-ADC3-false-HAL-true,7-MX_ADC4_Init-ADC4-false-HAL-true,8-MX_COMP5_Init-COMP5-false-HAL-true,9-MX_COMP7_Init-COMP7-false-HAL-true,10-MX_DAC1_Init-DAC1-false-HAL-true,11-MX_DAC4_Init-DAC4-false-HAL-true,12-MX_HRTIM1_Init-HRTIM1-false-HAL-true,13-MX_USART1_UART_Init-USART1-false-HAL-true
-RCC.ADC12Freq_Value=170000000
-RCC.ADC345Freq_Value=170000000
-RCC.AHBFreq_Value=170000000
-RCC.APB1Freq_Value=170000000
-RCC.APB1TimFreq_Value=170000000
-RCC.APB2Freq_Value=170000000
-RCC.APB2TimFreq_Value=170000000
-RCC.CRSFreq_Value=48000000
-RCC.CortexFreq_Value=170000000
-RCC.EXTERNAL_CLOCK_VALUE=12288000
-RCC.FCLKCortexFreq_Value=170000000
-RCC.FDCANFreq_Value=170000000
-RCC.FamilyName=M
-RCC.HCLKFreq_Value=170000000
-RCC.HSE_VALUE=40000000
-RCC.HSI48_VALUE=48000000
-RCC.HSI_VALUE=16000000
-RCC.I2C1Freq_Value=170000000
-RCC.I2C2Freq_Value=170000000
-RCC.I2C3Freq_Value=170000000
-RCC.I2C4Freq_Value=170000000
-RCC.I2SFreq_Value=170000000
-RCC.IPParameters=ADC12Freq_Value,ADC345Freq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CRSFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SFreq_Value,LPTIM1Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,PLLM,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSourceVirtual,PWRFreq_Value,QSPIFreq_Value,RNGFreq_Value,SAI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value
-RCC.LPTIM1Freq_Value=170000000
-RCC.LPUART1Freq_Value=170000000
-RCC.LSCOPinFreq_Value=32000
-RCC.LSE_VALUE=32768
-RCC.LSI_VALUE=32000
-RCC.MCO1PinFreq_Value=16000000
-RCC.PLLM=RCC_PLLM_DIV4
-RCC.PLLN=34
-RCC.PLLPoutputFreq_Value=170000000
-RCC.PLLQoutputFreq_Value=170000000
-RCC.PLLRCLKFreq_Value=170000000
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-RCC.PWRFreq_Value=170000000
-RCC.QSPIFreq_Value=170000000
-RCC.RNGFreq_Value=170000000
-RCC.SAI1Freq_Value=170000000
-RCC.SYSCLKFreq_VALUE=170000000
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-RCC.USART1Freq_Value=170000000
-RCC.USART2Freq_Value=170000000
-RCC.USART3Freq_Value=170000000
-RCC.USBFreq_Value=170000000
-RCC.VCOInputFreq_Value=10000000
-RCC.VCOOutputFreq_Value=340000000
-SH.SharedAnalog_PB13.0=ADC3_IN5,IN5-Single-Ended
-SH.SharedAnalog_PB13.1=COMP5_INP,INP
-SH.SharedAnalog_PB13.ConfNb=2
-SH.SharedAnalog_PB14.0=COMP7_INP,INP
-SH.SharedAnalog_PB14.1=ADC4_IN4,IN4-Single-Ended
-SH.SharedAnalog_PB14.ConfNb=2
-USART1.IPParameters=VirtualMode-Asynchronous
-USART1.VirtualMode-Asynchronous=VM_ASYNC
-VP_COMP5_VS_DAC1OUT2.Mode=INM_DAC1OUT2
-VP_COMP5_VS_DAC1OUT2.Signal=COMP5_VS_DAC1OUT2
-VP_COMP7_VS_DAC4OUT1.Mode=INM_DAC4OUT1
-VP_COMP7_VS_DAC4OUT1.Signal=COMP7_VS_DAC4OUT1
-VP_CORDIC_VS_CORDIC.Mode=CORDIC_Activate
-VP_CORDIC_VS_CORDIC.Signal=CORDIC_VS_CORDIC
-VP_DAC1_VS_DACI2.Mode=DAC_OUT2_Int
-VP_DAC1_VS_DACI2.Signal=DAC1_VS_DACI2
-VP_DAC4_VS_DACI1.Mode=DAC_OUT1_Int
-VP_DAC4_VS_DACI1.Signal=DAC4_VS_DACI1
-VP_FMAC_VS_FMAC.Mode=FMAC_Activate
-VP_FMAC_VS_FMAC.Signal=FMAC_VS_FMAC
-VP_HRTIM1_VS_hrtimMasterTimerNoOutput.Mode=MasterTimer
-VP_HRTIM1_VS_hrtimMasterTimerNoOutput.Signal=HRTIM1_VS_hrtimMasterTimerNoOutput
-VP_SYS_VS_DBSignals.Mode=DisableDeadBatterySignals
-VP_SYS_VS_DBSignals.Signal=SYS_VS_DBSignals
-VP_SYS_VS_Systick.Mode=SysTick
-VP_SYS_VS_Systick.Signal=SYS_VS_Systick
-VP_SYS_V_VREFBUF.Mode=ExternalMode
-VP_SYS_V_VREFBUF.Signal=SYS_V_VREFBUF
-VP_TIM1_VS_ClockSourceINT.Mode=Internal
-VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
-board=custom
-isbadioc=false

code/Core/Inc/main.h

@@ -1,71 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.h
-  * @brief          : Header for main.c file.
-  *                   This file contains the common defines of the application.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2025 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MAIN_H
-#define __MAIN_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32g4xx_hal.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-void HAL_HRTIM_MspPostInit(HRTIM_HandleTypeDef *hhrtim);
-
-/* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
-
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-/* Private defines -----------------------------------------------------------*/
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MAIN_H */

code/Core/Inc/stm32g4xx_hal_conf.h

@@ -1,380 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32g4xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file
-  ******************************************************************************
- * @attention
-  *
-  * Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32G4xx_HAL_CONF_H
-#define STM32G4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-
-#define HAL_MODULE_ENABLED
-
-  #define HAL_ADC_MODULE_ENABLED
-#define HAL_COMP_MODULE_ENABLED
-#define HAL_CORDIC_MODULE_ENABLED
-/*#define HAL_CRC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
-#define HAL_DAC_MODULE_ENABLED
-/*#define HAL_FDCAN_MODULE_ENABLED   */
-#define HAL_FMAC_MODULE_ENABLED
-#define HAL_HRTIM_MODULE_ENABLED
-/*#define HAL_IRDA_MODULE_ENABLED   */
-/*#define HAL_IWDG_MODULE_ENABLED   */
-/*#define HAL_I2C_MODULE_ENABLED   */
-/*#define HAL_I2S_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
-/*#define HAL_NAND_MODULE_ENABLED   */
-/*#define HAL_NOR_MODULE_ENABLED   */
-/*#define HAL_OPAMP_MODULE_ENABLED   */
-/*#define HAL_PCD_MODULE_ENABLED   */
-/*#define HAL_QSPI_MODULE_ENABLED   */
-/*#define HAL_RNG_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
-/*#define HAL_SAI_MODULE_ENABLED   */
-/*#define HAL_SMARTCARD_MODULE_ENABLED   */
-/*#define HAL_SMBUS_MODULE_ENABLED   */
-/*#define HAL_SPI_MODULE_ENABLED   */
-/*#define HAL_SRAM_MODULE_ENABLED   */
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-/*#define HAL_USART_MODULE_ENABLED   */
-/*#define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-
-/* ########################## Register Callbacks selection ############################## */
-/**
-  * @brief This is the list of modules where register callback can be used
-  */
-#define USE_HAL_ADC_REGISTER_CALLBACKS        0U
-#define USE_HAL_COMP_REGISTER_CALLBACKS       0U
-#define USE_HAL_CORDIC_REGISTER_CALLBACKS     0U
-#define USE_HAL_CRYP_REGISTER_CALLBACKS       0U
-#define USE_HAL_DAC_REGISTER_CALLBACKS        0U
-#define USE_HAL_EXTI_REGISTER_CALLBACKS       0U
-#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0U
-#define USE_HAL_FMAC_REGISTER_CALLBACKS       0U
-#define USE_HAL_HRTIM_REGISTER_CALLBACKS      0U
-#define USE_HAL_I2C_REGISTER_CALLBACKS        0U
-#define USE_HAL_I2S_REGISTER_CALLBACKS        0U
-#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U
-#define USE_HAL_NAND_REGISTER_CALLBACKS       0U
-#define USE_HAL_NOR_REGISTER_CALLBACKS        0U
-#define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U
-#define USE_HAL_PCD_REGISTER_CALLBACKS        0U
-#define USE_HAL_QSPI_REGISTER_CALLBACKS       0U
-#define USE_HAL_RNG_REGISTER_CALLBACKS        0U
-#define USE_HAL_RTC_REGISTER_CALLBACKS        0U
-#define USE_HAL_SAI_REGISTER_CALLBACKS        0U
-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U
-#define USE_HAL_SPI_REGISTER_CALLBACKS        0U
-#define USE_HAL_SRAM_REGISTER_CALLBACKS       0U
-#define USE_HAL_TIM_REGISTER_CALLBACKS        0U
-#define USE_HAL_UART_REGISTER_CALLBACKS       0U
-#define USE_HAL_USART_REGISTER_CALLBACKS      0U
-#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U
-
-/* ########################## Oscillator Values adaptation ####################*/
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    (40000000UL) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100UL)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (16000000UL) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.
-  *        This internal oscillator is mainly dedicated to provide a high precision clock to
-  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
-  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
-  *        which is subject to manufacturing process variations.
-  */
-#if !defined  (HSI48_VALUE)
-  #define HSI48_VALUE   (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.
-                                               The real value my vary depending on manufacturing process variations.*/
-#endif /* HSI48_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
-/*!< Value of the Internal Low Speed oscillator in Hz
-The real value may vary depending on the variations in voltage and temperature.*/
-#define LSI_VALUE  (32000UL)     /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  *        This value is used by the UART, RTC HAL module to compute the system frequency
-  */
-#if !defined  (LSE_VALUE)
-#define LSE_VALUE  (32768UL)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-#define LSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S and SAI peripherals
-  *        This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-#define EXTERNAL_CLOCK_VALUE    (12288000UL) /*!< Value of the External oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-
-#define  VDD_VALUE                   (3300UL) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY           (15UL)    /*!< tick interrupt priority (lowest by default)  */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              0U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
- * Activated: CRC code is present inside driver
- * Deactivated: CRC code cleaned from driver
- */
-
-#define USE_SPI_CRC                   0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-#include "stm32g4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-#include "stm32g4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-#include "stm32g4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-#include "stm32g4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-#include "stm32g4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
-#include "stm32g4xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CORDIC_MODULE_ENABLED
-#include "stm32g4xx_hal_cordic.h"
-#endif /* HAL_CORDIC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-#include "stm32g4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-#include "stm32g4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-#include "stm32g4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-#include "stm32g4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_FDCAN_MODULE_ENABLED
-#include "stm32g4xx_hal_fdcan.h"
-#endif /* HAL_FDCAN_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-#include "stm32g4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_FMAC_MODULE_ENABLED
-#include "stm32g4xx_hal_fmac.h"
-#endif /* HAL_FMAC_MODULE_ENABLED */
-
-#ifdef HAL_HRTIM_MODULE_ENABLED
-#include "stm32g4xx_hal_hrtim.h"
-#endif /* HAL_HRTIM_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
-#include "stm32g4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
-#include "stm32g4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
-#include "stm32g4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
-#include "stm32g4xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
-#include "stm32g4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-#include "stm32g4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-#include "stm32g4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_OPAMP_MODULE_ENABLED
-#include "stm32g4xx_hal_opamp.h"
-#endif /* HAL_OPAMP_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-#include "stm32g4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-#include "stm32g4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
-#include "stm32g4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
-#include "stm32g4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
-#include "stm32g4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
-#include "stm32g4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
-#include "stm32g4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
-#include "stm32g4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
-#include "stm32g4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-#include "stm32g4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-#include "stm32g4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
-#include "stm32g4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
-#include "stm32g4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
-#include "stm32g4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-void assert_failed(uint8_t *file, uint32_t line);
-#else
-#define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32G4xx_HAL_CONF_H */

code/Core/Inc/stm32g4xx_it.h

@@ -1,66 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32g4xx_it.h
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2025 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32G4xx_IT_H
-#define __STM32G4xx_IT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32G4xx_IT_H */

code/Core/Src/main.c

@@ -1,819 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.c
-  * @brief          : Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2025 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-ADC_HandleTypeDef hadc3;
-ADC_HandleTypeDef hadc4;
-
-COMP_HandleTypeDef hcomp5;
-COMP_HandleTypeDef hcomp7;
-
-CORDIC_HandleTypeDef hcordic;
-
-DAC_HandleTypeDef hdac1;
-DAC_HandleTypeDef hdac4;
-
-FMAC_HandleTypeDef hfmac;
-
-HRTIM_HandleTypeDef hhrtim1;
-
-TIM_HandleTypeDef htim1;
-
-UART_HandleTypeDef huart1;
-
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-static void MX_GPIO_Init(void);
-static void MX_TIM1_Init(void);
-static void MX_CORDIC_Init(void);
-static void MX_FMAC_Init(void);
-static void MX_ADC3_Init(void);
-static void MX_ADC4_Init(void);
-static void MX_COMP5_Init(void);
-static void MX_COMP7_Init(void);
-static void MX_DAC1_Init(void);
-static void MX_DAC4_Init(void);
-static void MX_HRTIM1_Init(void);
-static void MX_USART1_UART_Init(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
-  * @brief  The application entry point.
-  * @retval int
-  */
-int main(void)
-{
-
-  /* USER CODE BEGIN 1 */
-
-  /* USER CODE END 1 */
-
-  /* MCU Configuration--------------------------------------------------------*/
-
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  HAL_Init();
-
-  /* USER CODE BEGIN Init */
-
-  /* USER CODE END Init */
-
-  /* Configure the system clock */
-  SystemClock_Config();
-
-  /* USER CODE BEGIN SysInit */
-
-  /* USER CODE END SysInit */
-
-  /* Initialize all configured peripherals */
-  MX_GPIO_Init();
-  MX_TIM1_Init();
-  MX_CORDIC_Init();
-  MX_FMAC_Init();
-  MX_ADC3_Init();
-  MX_ADC4_Init();
-  MX_COMP5_Init();
-  MX_COMP7_Init();
-  MX_DAC1_Init();
-  MX_DAC4_Init();
-  MX_HRTIM1_Init();
-  MX_USART1_UART_Init();
-  /* USER CODE BEGIN 2 */
-
-  /* USER CODE END 2 */
-
-  /* Infinite loop */
-  /* USER CODE BEGIN WHILE */
-  while (1)
-  {
-    /* USER CODE END WHILE */
-
-    /* USER CODE BEGIN 3 */
-  }
-  /* USER CODE END 3 */
-}
-
-/**
-  * @brief System Clock Configuration
-  * @retval None
-  */
-void SystemClock_Config(void)
-{
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-
-  /** Configure the main internal regulator output voltage
-  */
-  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST);
-
-  /** Initializes the RCC Oscillators according to the specified parameters
-  * in the RCC_OscInitTypeDef structure.
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4;
-  RCC_OscInitStruct.PLL.PLLN = 34;
-  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
-  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
-  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** Initializes the CPU, AHB and APB buses clocks
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-}
-
-/**
-  * @brief ADC3 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_ADC3_Init(void)
-{
-
-  /* USER CODE BEGIN ADC3_Init 0 */
-
-  /* USER CODE END ADC3_Init 0 */
-
-  ADC_MultiModeTypeDef multimode = {0};
-  ADC_ChannelConfTypeDef sConfig = {0};
-
-  /* USER CODE BEGIN ADC3_Init 1 */
-
-  /* USER CODE END ADC3_Init 1 */
-
-  /** Common config
-  */
-  hadc3.Instance = ADC3;
-  hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
-  hadc3.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc3.Init.GainCompensation = 0;
-  hadc3.Init.ScanConvMode = ADC_SCAN_DISABLE;
-  hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
-  hadc3.Init.LowPowerAutoWait = DISABLE;
-  hadc3.Init.ContinuousConvMode = DISABLE;
-  hadc3.Init.NbrOfConversion = 1;
-  hadc3.Init.DiscontinuousConvMode = DISABLE;
-  hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
-  hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc3.Init.DMAContinuousRequests = DISABLE;
-  hadc3.Init.Overrun = ADC_OVR_DATA_PRESERVED;
-  hadc3.Init.OversamplingMode = DISABLE;
-  if (HAL_ADC_Init(&hadc3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** Configure the ADC multi-mode
-  */
-  multimode.Mode = ADC_MODE_INDEPENDENT;
-  if (HAL_ADCEx_MultiModeConfigChannel(&hadc3, &multimode) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** Configure Regular Channel
-  */
-  sConfig.Channel = ADC_CHANNEL_5;
-  sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
-  sConfig.SingleDiff = ADC_SINGLE_ENDED;
-  sConfig.OffsetNumber = ADC_OFFSET_NONE;
-  sConfig.Offset = 0;
-  if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN ADC3_Init 2 */
-
-  /* USER CODE END ADC3_Init 2 */
-
-}
-
-/**
-  * @brief ADC4 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_ADC4_Init(void)
-{
-
-  /* USER CODE BEGIN ADC4_Init 0 */
-
-  /* USER CODE END ADC4_Init 0 */
-
-  ADC_ChannelConfTypeDef sConfig = {0};
-
-  /* USER CODE BEGIN ADC4_Init 1 */
-
-  /* USER CODE END ADC4_Init 1 */
-
-  /** Common config
-  */
-  hadc4.Instance = ADC4;
-  hadc4.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
-  hadc4.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc4.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc4.Init.GainCompensation = 0;
-  hadc4.Init.ScanConvMode = ADC_SCAN_DISABLE;
-  hadc4.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
-  hadc4.Init.LowPowerAutoWait = DISABLE;
-  hadc4.Init.ContinuousConvMode = DISABLE;
-  hadc4.Init.NbrOfConversion = 1;
-  hadc4.Init.DiscontinuousConvMode = DISABLE;
-  hadc4.Init.ExternalTrigConv = ADC_SOFTWARE_START;
-  hadc4.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc4.Init.DMAContinuousRequests = DISABLE;
-  hadc4.Init.Overrun = ADC_OVR_DATA_PRESERVED;
-  hadc4.Init.OversamplingMode = DISABLE;
-  if (HAL_ADC_Init(&hadc4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** Configure Regular Channel
-  */
-  sConfig.Channel = ADC_CHANNEL_4;
-  sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
-  sConfig.SingleDiff = ADC_SINGLE_ENDED;
-  sConfig.OffsetNumber = ADC_OFFSET_NONE;
-  sConfig.Offset = 0;
-  if (HAL_ADC_ConfigChannel(&hadc4, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN ADC4_Init 2 */
-
-  /* USER CODE END ADC4_Init 2 */
-
-}
-
-/**
-  * @brief COMP5 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_COMP5_Init(void)
-{
-
-  /* USER CODE BEGIN COMP5_Init 0 */
-
-  /* USER CODE END COMP5_Init 0 */
-
-  /* USER CODE BEGIN COMP5_Init 1 */
-
-  /* USER CODE END COMP5_Init 1 */
-  hcomp5.Instance = COMP5;
-  hcomp5.Init.InputPlus = COMP_INPUT_PLUS_IO1;
-  hcomp5.Init.InputMinus = COMP_INPUT_MINUS_DAC1_CH2;
-  hcomp5.Init.OutputPol = COMP_OUTPUTPOL_NONINVERTED;
-  hcomp5.Init.Hysteresis = COMP_HYSTERESIS_NONE;
-  hcomp5.Init.BlankingSrce = COMP_BLANKINGSRC_NONE;
-  hcomp5.Init.TriggerMode = COMP_TRIGGERMODE_NONE;
-  if (HAL_COMP_Init(&hcomp5) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN COMP5_Init 2 */
-
-  /* USER CODE END COMP5_Init 2 */
-
-}
-
-/**
-  * @brief COMP7 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_COMP7_Init(void)
-{
-
-  /* USER CODE BEGIN COMP7_Init 0 */
-
-  /* USER CODE END COMP7_Init 0 */
-
-  /* USER CODE BEGIN COMP7_Init 1 */
-
-  /* USER CODE END COMP7_Init 1 */
-  hcomp7.Instance = COMP7;
-  hcomp7.Init.InputPlus = COMP_INPUT_PLUS_IO1;
-  hcomp7.Init.InputMinus = COMP_INPUT_MINUS_DAC4_CH1;
-  hcomp7.Init.OutputPol = COMP_OUTPUTPOL_NONINVERTED;
-  hcomp7.Init.Hysteresis = COMP_HYSTERESIS_NONE;
-  hcomp7.Init.BlankingSrce = COMP_BLANKINGSRC_NONE;
-  hcomp7.Init.TriggerMode = COMP_TRIGGERMODE_NONE;
-  if (HAL_COMP_Init(&hcomp7) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN COMP7_Init 2 */
-
-  /* USER CODE END COMP7_Init 2 */
-
-}
-
-/**
-  * @brief CORDIC Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_CORDIC_Init(void)
-{
-
-  /* USER CODE BEGIN CORDIC_Init 0 */
-
-  /* USER CODE END CORDIC_Init 0 */
-
-  /* USER CODE BEGIN CORDIC_Init 1 */
-
-  /* USER CODE END CORDIC_Init 1 */
-  hcordic.Instance = CORDIC;
-  if (HAL_CORDIC_Init(&hcordic) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN CORDIC_Init 2 */
-
-  /* USER CODE END CORDIC_Init 2 */
-
-}
-
-/**
-  * @brief DAC1 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_DAC1_Init(void)
-{
-
-  /* USER CODE BEGIN DAC1_Init 0 */
-
-  /* USER CODE END DAC1_Init 0 */
-
-  DAC_ChannelConfTypeDef sConfig = {0};
-
-  /* USER CODE BEGIN DAC1_Init 1 */
-
-  /* USER CODE END DAC1_Init 1 */
-
-  /** DAC Initialization
-  */
-  hdac1.Instance = DAC1;
-  if (HAL_DAC_Init(&hdac1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** DAC channel OUT2 config
-  */
-  sConfig.DAC_HighFrequency = DAC_HIGH_FREQUENCY_INTERFACE_MODE_AUTOMATIC;
-  sConfig.DAC_DMADoubleDataMode = DISABLE;
-  sConfig.DAC_SignedFormat = DISABLE;
-  sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
-  sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
-  sConfig.DAC_Trigger2 = DAC_TRIGGER_NONE;
-  sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
-  sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_INTERNAL;
-  sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
-  if (HAL_DAC_ConfigChannel(&hdac1, &sConfig, DAC_CHANNEL_2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN DAC1_Init 2 */
-
-  /* USER CODE END DAC1_Init 2 */
-
-}
-
-/**
-  * @brief DAC4 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_DAC4_Init(void)
-{
-
-  /* USER CODE BEGIN DAC4_Init 0 */
-
-  /* USER CODE END DAC4_Init 0 */
-
-  DAC_ChannelConfTypeDef sConfig = {0};
-
-  /* USER CODE BEGIN DAC4_Init 1 */
-
-  /* USER CODE END DAC4_Init 1 */
-
-  /** DAC Initialization
-  */
-  hdac4.Instance = DAC4;
-  if (HAL_DAC_Init(&hdac4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /** DAC channel OUT1 config
-  */
-  sConfig.DAC_HighFrequency = DAC_HIGH_FREQUENCY_INTERFACE_MODE_AUTOMATIC;
-  sConfig.DAC_DMADoubleDataMode = DISABLE;
-  sConfig.DAC_SignedFormat = DISABLE;
-  sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
-  sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
-  sConfig.DAC_Trigger2 = DAC_TRIGGER_NONE;
-  sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
-  sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_INTERNAL;
-  sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
-  if (HAL_DAC_ConfigChannel(&hdac4, &sConfig, DAC_CHANNEL_1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN DAC4_Init 2 */
-
-  /* USER CODE END DAC4_Init 2 */
-
-}
-
-/**
-  * @brief FMAC Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_FMAC_Init(void)
-{
-
-  /* USER CODE BEGIN FMAC_Init 0 */
-
-  /* USER CODE END FMAC_Init 0 */
-
-  /* USER CODE BEGIN FMAC_Init 1 */
-
-  /* USER CODE END FMAC_Init 1 */
-  hfmac.Instance = FMAC;
-  if (HAL_FMAC_Init(&hfmac) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN FMAC_Init 2 */
-
-  /* USER CODE END FMAC_Init 2 */
-
-}
-
-/**
-  * @brief HRTIM1 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_HRTIM1_Init(void)
-{
-
-  /* USER CODE BEGIN HRTIM1_Init 0 */
-
-  /* USER CODE END HRTIM1_Init 0 */
-
-  HRTIM_EventCfgTypeDef pEventCfg = {0};
-  HRTIM_TimeBaseCfgTypeDef pTimeBaseCfg = {0};
-  HRTIM_TimerCfgTypeDef pTimerCfg = {0};
-  HRTIM_TimerCtlTypeDef pTimerCtl = {0};
-  HRTIM_OutputCfgTypeDef pOutputCfg = {0};
-
-  /* USER CODE BEGIN HRTIM1_Init 1 */
-
-  /* USER CODE END HRTIM1_Init 1 */
-  hhrtim1.Instance = HRTIM1;
-  hhrtim1.Init.HRTIMInterruptResquests = HRTIM_IT_NONE;
-  hhrtim1.Init.SyncOptions = HRTIM_SYNCOPTION_NONE;
-  if (HAL_HRTIM_Init(&hhrtim1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_DLLCalibrationStart(&hhrtim1, HRTIM_CALIBRATIONRATE_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_PollForDLLCalibration(&hhrtim1, 10) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_EventPrescalerConfig(&hhrtim1, HRTIM_EVENTPRESCALER_DIV1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  pEventCfg.Source = HRTIM_EEV1SRC_COMP2_OUT;
-  pEventCfg.Polarity = HRTIM_EVENTPOLARITY_HIGH;
-  pEventCfg.Sensitivity = HRTIM_EVENTSENSITIVITY_LEVEL;
-  pEventCfg.FastMode = HRTIM_EVENTFASTMODE_DISABLE;
-  if (HAL_HRTIM_EventConfig(&hhrtim1, HRTIM_EVENT_1, &pEventCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  pTimeBaseCfg.Period = 0xFFDF;
-  pTimeBaseCfg.RepetitionCounter = 0x00;
-  pTimeBaseCfg.PrescalerRatio = HRTIM_PRESCALERRATIO_MUL32;
-  pTimeBaseCfg.Mode = HRTIM_MODE_CONTINUOUS;
-  if (HAL_HRTIM_TimeBaseConfig(&hhrtim1, HRTIM_TIMERINDEX_MASTER, &pTimeBaseCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  pTimerCfg.InterruptRequests = HRTIM_MASTER_IT_NONE;
-  pTimerCfg.DMARequests = HRTIM_MASTER_DMA_NONE;
-  pTimerCfg.DMASrcAddress = 0x0000;
-  pTimerCfg.DMADstAddress = 0x0000;
-  pTimerCfg.DMASize = 0x1;
-  pTimerCfg.HalfModeEnable = HRTIM_HALFMODE_DISABLED;
-  pTimerCfg.InterleavedMode = HRTIM_INTERLEAVED_MODE_DISABLED;
-  pTimerCfg.StartOnSync = HRTIM_SYNCSTART_DISABLED;
-  pTimerCfg.ResetOnSync = HRTIM_SYNCRESET_DISABLED;
-  pTimerCfg.DACSynchro = HRTIM_DACSYNC_NONE;
-  pTimerCfg.PreloadEnable = HRTIM_PRELOAD_DISABLED;
-  pTimerCfg.UpdateGating = HRTIM_UPDATEGATING_INDEPENDENT;
-  pTimerCfg.BurstMode = HRTIM_TIMERBURSTMODE_MAINTAINCLOCK;
-  pTimerCfg.RepetitionUpdate = HRTIM_UPDATEONREPETITION_DISABLED;
-  pTimerCfg.ReSyncUpdate = HRTIM_TIMERESYNC_UPDATE_UNCONDITIONAL;
-  if (HAL_HRTIM_WaveformTimerConfig(&hhrtim1, HRTIM_TIMERINDEX_MASTER, &pTimerCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_TimeBaseConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_A, &pTimeBaseCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  pTimerCtl.UpDownMode = HRTIM_TIMERUPDOWNMODE_UP;
-  pTimerCtl.DualChannelDacEnable = HRTIM_TIMER_DCDE_DISABLED;
-  if (HAL_HRTIM_WaveformTimerControl(&hhrtim1, HRTIM_TIMERINDEX_TIMER_A, &pTimerCtl) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  pTimerCfg.InterruptRequests = HRTIM_TIM_IT_NONE;
-  pTimerCfg.DMARequests = HRTIM_TIM_DMA_NONE;
-  pTimerCfg.PushPull = HRTIM_TIMPUSHPULLMODE_DISABLED;
-  pTimerCfg.FaultEnable = HRTIM_TIMFAULTENABLE_NONE;
-  pTimerCfg.FaultLock = HRTIM_TIMFAULTLOCK_READWRITE;
-  pTimerCfg.DeadTimeInsertion = HRTIM_TIMDEADTIMEINSERTION_DISABLED;
-  pTimerCfg.DelayedProtectionMode = HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED;
-  pTimerCfg.UpdateTrigger = HRTIM_TIMUPDATETRIGGER_NONE;
-  pTimerCfg.ResetTrigger = HRTIM_TIMRESETTRIGGER_NONE;
-  pTimerCfg.ResetUpdate = HRTIM_TIMUPDATEONRESET_DISABLED;
-  if (HAL_HRTIM_WaveformTimerConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_A, &pTimerCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_WaveformTimerConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_B, &pTimerCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  pOutputCfg.Polarity = HRTIM_OUTPUTPOLARITY_HIGH;
-  pOutputCfg.SetSource = HRTIM_OUTPUTSET_NONE;
-  pOutputCfg.ResetSource = HRTIM_OUTPUTRESET_NONE;
-  pOutputCfg.IdleMode = HRTIM_OUTPUTIDLEMODE_NONE;
-  pOutputCfg.IdleLevel = HRTIM_OUTPUTIDLELEVEL_INACTIVE;
-  pOutputCfg.FaultLevel = HRTIM_OUTPUTFAULTLEVEL_NONE;
-  pOutputCfg.ChopperModeEnable = HRTIM_OUTPUTCHOPPERMODE_DISABLED;
-  pOutputCfg.BurstModeEntryDelayed = HRTIM_OUTPUTBURSTMODEENTRY_REGULAR;
-  if (HAL_HRTIM_WaveformOutputConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_A, HRTIM_OUTPUT_TA1, &pOutputCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_WaveformOutputConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_B, HRTIM_OUTPUT_TB1, &pOutputCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_WaveformOutputConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_A, HRTIM_OUTPUT_TA2, &pOutputCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_WaveformOutputConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_B, HRTIM_OUTPUT_TB2, &pOutputCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_TimeBaseConfig(&hhrtim1, HRTIM_TIMERINDEX_TIMER_B, &pTimeBaseCfg) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_HRTIM_WaveformTimerControl(&hhrtim1, HRTIM_TIMERINDEX_TIMER_B, &pTimerCtl) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN HRTIM1_Init 2 */
-
-  /* USER CODE END HRTIM1_Init 2 */
-  HAL_HRTIM_MspPostInit(&hhrtim1);
-
-}
-
-/**
-  * @brief TIM1 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_TIM1_Init(void)
-{
-
-  /* USER CODE BEGIN TIM1_Init 0 */
-
-  /* USER CODE END TIM1_Init 0 */
-
-  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-
-  /* USER CODE BEGIN TIM1_Init 1 */
-
-  /* USER CODE END TIM1_Init 1 */
-  htim1.Instance = TIM1;
-  htim1.Init.Prescaler = 0;
-  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim1.Init.Period = 65535;
-  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim1.Init.RepetitionCounter = 0;
-  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN TIM1_Init 2 */
-
-  /* USER CODE END TIM1_Init 2 */
-
-}
-
-/**
-  * @brief USART1 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_USART1_UART_Init(void)
-{
-
-  /* USER CODE BEGIN USART1_Init 0 */
-
-  /* USER CODE END USART1_Init 0 */
-
-  /* USER CODE BEGIN USART1_Init 1 */
-
-  /* USER CODE END USART1_Init 1 */
-  huart1.Instance = USART1;
-  huart1.Init.BaudRate = 115200;
-  huart1.Init.WordLength = UART_WORDLENGTH_8B;
-  huart1.Init.StopBits = UART_STOPBITS_1;
-  huart1.Init.Parity = UART_PARITY_NONE;
-  huart1.Init.Mode = UART_MODE_TX_RX;
-  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
-  huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
-  huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;
-  huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
-  if (HAL_UART_Init(&huart1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN USART1_Init 2 */
-
-  /* USER CODE END USART1_Init 2 */
-
-}
-
-/**
-  * @brief GPIO Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_GPIO_Init(void)
-{
-  /* USER CODE BEGIN MX_GPIO_Init_1 */
-
-  /* USER CODE END MX_GPIO_Init_1 */
-
-  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOF_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-
-  /* USER CODE BEGIN MX_GPIO_Init_2 */
-
-  /* USER CODE END MX_GPIO_Init_2 */
-}
-
-/* USER CODE BEGIN 4 */
-
-
-
-/* USER CODE END 4 */
-
-/**
-  * @brief  This function is executed in case of error occurrence.
-  * @retval None
-  */
-void Error_Handler(void)
-{
-  /* USER CODE BEGIN Error_Handler_Debug */
-  /* User can add his own implementation to report the HAL error return state */
-  __disable_irq();
-  while (1)
-  {
-  }
-  /* USER CODE END Error_Handler_Debug */
-}
-#ifdef USE_FULL_ASSERT
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t *file, uint32_t line)
-{
-  /* USER CODE BEGIN 6 */
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-  /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */

code/Core/Src/stm32g4xx_hal_msp.c

@@ -1,673 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file         stm32g4xx_hal_msp.c
-  * @brief        This file provides code for the MSP Initialization
-  *               and de-Initialization codes.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2025 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN Define */
-
-/* USER CODE END Define */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN Macro */
-
-/* USER CODE END Macro */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* External functions --------------------------------------------------------*/
-/* USER CODE BEGIN ExternalFunctions */
-
-/* USER CODE END ExternalFunctions */
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-void HAL_HRTIM_MspPostInit(HRTIM_HandleTypeDef *hhrtim);
-                    /**
-  * Initializes the Global MSP.
-  */
-void HAL_MspInit(void)
-{
-
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  __HAL_RCC_SYSCFG_CLK_ENABLE();
-  __HAL_RCC_PWR_CLK_ENABLE();
-
-  /* System interrupt init*/
-
-  /** Configure the internal voltage reference buffer high impedance mode
-  */
-  HAL_SYSCFG_VREFBUF_HighImpedanceConfig(SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE);
-
-  /** Disable the Internal Voltage Reference buffer
-  */
-  HAL_SYSCFG_DisableVREFBUF();
-
-  /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral
-  */
-  HAL_PWREx_DisableUCPDDeadBattery();
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-static uint32_t HAL_RCC_ADC345_CLK_ENABLED=0;
-
-/**
-  * @brief ADC MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hadc: ADC handle pointer
-  * @retval None
-  */
-void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-  if(hadc->Instance==ADC3)
-  {
-    /* USER CODE BEGIN ADC3_MspInit 0 */
-
-    /* USER CODE END ADC3_MspInit 0 */
-
-  /** Initializes the peripherals clocks
-  */
-    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC345;
-    PeriphClkInit.Adc345ClockSelection = RCC_ADC345CLKSOURCE_SYSCLK;
-    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
-    {
-      Error_Handler();
-    }
-
-    /* Peripheral clock enable */
-    HAL_RCC_ADC345_CLK_ENABLED++;
-    if(HAL_RCC_ADC345_CLK_ENABLED==1){
-      __HAL_RCC_ADC345_CLK_ENABLE();
-    }
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**ADC3 GPIO Configuration
-    PB13     ------> ADC3_IN5
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_13;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN ADC3_MspInit 1 */
-
-    /* USER CODE END ADC3_MspInit 1 */
-  }
-  else if(hadc->Instance==ADC4)
-  {
-    /* USER CODE BEGIN ADC4_MspInit 0 */
-
-    /* USER CODE END ADC4_MspInit 0 */
-
-  /** Initializes the peripherals clocks
-  */
-    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC345;
-    PeriphClkInit.Adc345ClockSelection = RCC_ADC345CLKSOURCE_SYSCLK;
-    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
-    {
-      Error_Handler();
-    }
-
-    /* Peripheral clock enable */
-    HAL_RCC_ADC345_CLK_ENABLED++;
-    if(HAL_RCC_ADC345_CLK_ENABLED==1){
-      __HAL_RCC_ADC345_CLK_ENABLE();
-    }
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**ADC4 GPIO Configuration
-    PB14     ------> ADC4_IN4
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_14;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN ADC4_MspInit 1 */
-
-    /* USER CODE END ADC4_MspInit 1 */
-  }
-
-}
-
-/**
-  * @brief ADC MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hadc: ADC handle pointer
-  * @retval None
-  */
-void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
-{
-  if(hadc->Instance==ADC3)
-  {
-    /* USER CODE BEGIN ADC3_MspDeInit 0 */
-
-    /* USER CODE END ADC3_MspDeInit 0 */
-    /* Peripheral clock disable */
-    HAL_RCC_ADC345_CLK_ENABLED--;
-    if(HAL_RCC_ADC345_CLK_ENABLED==0){
-      __HAL_RCC_ADC345_CLK_DISABLE();
-    }
-
-    /**ADC3 GPIO Configuration
-    PB13     ------> ADC3_IN5
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
-
-    /* USER CODE BEGIN ADC3_MspDeInit 1 */
-
-    /* USER CODE END ADC3_MspDeInit 1 */
-  }
-  else if(hadc->Instance==ADC4)
-  {
-    /* USER CODE BEGIN ADC4_MspDeInit 0 */
-
-    /* USER CODE END ADC4_MspDeInit 0 */
-    /* Peripheral clock disable */
-    HAL_RCC_ADC345_CLK_ENABLED--;
-    if(HAL_RCC_ADC345_CLK_ENABLED==0){
-      __HAL_RCC_ADC345_CLK_DISABLE();
-    }
-
-    /**ADC4 GPIO Configuration
-    PB14     ------> ADC4_IN4
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_14);
-
-    /* USER CODE BEGIN ADC4_MspDeInit 1 */
-
-    /* USER CODE END ADC4_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief COMP MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hcomp: COMP handle pointer
-  * @retval None
-  */
-void HAL_COMP_MspInit(COMP_HandleTypeDef* hcomp)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(hcomp->Instance==COMP5)
-  {
-    /* USER CODE BEGIN COMP5_MspInit 0 */
-
-    /* USER CODE END COMP5_MspInit 0 */
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**COMP5 GPIO Configuration
-    PB13     ------> COMP5_INP
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_13;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN COMP5_MspInit 1 */
-
-    /* USER CODE END COMP5_MspInit 1 */
-  }
-  else if(hcomp->Instance==COMP7)
-  {
-    /* USER CODE BEGIN COMP7_MspInit 0 */
-
-    /* USER CODE END COMP7_MspInit 0 */
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**COMP7 GPIO Configuration
-    PB14     ------> COMP7_INP
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_14;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN COMP7_MspInit 1 */
-
-    /* USER CODE END COMP7_MspInit 1 */
-  }
-
-}
-
-/**
-  * @brief COMP MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hcomp: COMP handle pointer
-  * @retval None
-  */
-void HAL_COMP_MspDeInit(COMP_HandleTypeDef* hcomp)
-{
-  if(hcomp->Instance==COMP5)
-  {
-    /* USER CODE BEGIN COMP5_MspDeInit 0 */
-
-    /* USER CODE END COMP5_MspDeInit 0 */
-
-    /**COMP5 GPIO Configuration
-    PB13     ------> COMP5_INP
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
-
-    /* USER CODE BEGIN COMP5_MspDeInit 1 */
-
-    /* USER CODE END COMP5_MspDeInit 1 */
-  }
-  else if(hcomp->Instance==COMP7)
-  {
-    /* USER CODE BEGIN COMP7_MspDeInit 0 */
-
-    /* USER CODE END COMP7_MspDeInit 0 */
-
-    /**COMP7 GPIO Configuration
-    PB14     ------> COMP7_INP
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_14);
-
-    /* USER CODE BEGIN COMP7_MspDeInit 1 */
-
-    /* USER CODE END COMP7_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief CORDIC MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hcordic: CORDIC handle pointer
-  * @retval None
-  */
-void HAL_CORDIC_MspInit(CORDIC_HandleTypeDef* hcordic)
-{
-  if(hcordic->Instance==CORDIC)
-  {
-    /* USER CODE BEGIN CORDIC_MspInit 0 */
-
-    /* USER CODE END CORDIC_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_CORDIC_CLK_ENABLE();
-    /* USER CODE BEGIN CORDIC_MspInit 1 */
-
-    /* USER CODE END CORDIC_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief CORDIC MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hcordic: CORDIC handle pointer
-  * @retval None
-  */
-void HAL_CORDIC_MspDeInit(CORDIC_HandleTypeDef* hcordic)
-{
-  if(hcordic->Instance==CORDIC)
-  {
-    /* USER CODE BEGIN CORDIC_MspDeInit 0 */
-
-    /* USER CODE END CORDIC_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_CORDIC_CLK_DISABLE();
-    /* USER CODE BEGIN CORDIC_MspDeInit 1 */
-
-    /* USER CODE END CORDIC_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief DAC MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hdac: DAC handle pointer
-  * @retval None
-  */
-void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
-{
-  if(hdac->Instance==DAC1)
-  {
-    /* USER CODE BEGIN DAC1_MspInit 0 */
-
-    /* USER CODE END DAC1_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_DAC1_CLK_ENABLE();
-    /* USER CODE BEGIN DAC1_MspInit 1 */
-
-    /* USER CODE END DAC1_MspInit 1 */
-  }
-  else if(hdac->Instance==DAC4)
-  {
-    /* USER CODE BEGIN DAC4_MspInit 0 */
-
-    /* USER CODE END DAC4_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_DAC4_CLK_ENABLE();
-    /* USER CODE BEGIN DAC4_MspInit 1 */
-
-    /* USER CODE END DAC4_MspInit 1 */
-  }
-
-}
-
-/**
-  * @brief DAC MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hdac: DAC handle pointer
-  * @retval None
-  */
-void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
-{
-  if(hdac->Instance==DAC1)
-  {
-    /* USER CODE BEGIN DAC1_MspDeInit 0 */
-
-    /* USER CODE END DAC1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_DAC1_CLK_DISABLE();
-    /* USER CODE BEGIN DAC1_MspDeInit 1 */
-
-    /* USER CODE END DAC1_MspDeInit 1 */
-  }
-  else if(hdac->Instance==DAC4)
-  {
-    /* USER CODE BEGIN DAC4_MspDeInit 0 */
-
-    /* USER CODE END DAC4_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_DAC4_CLK_DISABLE();
-    /* USER CODE BEGIN DAC4_MspDeInit 1 */
-
-    /* USER CODE END DAC4_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief FMAC MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hfmac: FMAC handle pointer
-  * @retval None
-  */
-void HAL_FMAC_MspInit(FMAC_HandleTypeDef* hfmac)
-{
-  if(hfmac->Instance==FMAC)
-  {
-    /* USER CODE BEGIN FMAC_MspInit 0 */
-
-    /* USER CODE END FMAC_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_FMAC_CLK_ENABLE();
-    /* USER CODE BEGIN FMAC_MspInit 1 */
-
-    /* USER CODE END FMAC_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief FMAC MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hfmac: FMAC handle pointer
-  * @retval None
-  */
-void HAL_FMAC_MspDeInit(FMAC_HandleTypeDef* hfmac)
-{
-  if(hfmac->Instance==FMAC)
-  {
-    /* USER CODE BEGIN FMAC_MspDeInit 0 */
-
-    /* USER CODE END FMAC_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_FMAC_CLK_DISABLE();
-    /* USER CODE BEGIN FMAC_MspDeInit 1 */
-
-    /* USER CODE END FMAC_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief HRTIM MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param hhrtim: HRTIM handle pointer
-  * @retval None
-  */
-void HAL_HRTIM_MspInit(HRTIM_HandleTypeDef* hhrtim)
-{
-  if(hhrtim->Instance==HRTIM1)
-  {
-    /* USER CODE BEGIN HRTIM1_MspInit 0 */
-
-    /* USER CODE END HRTIM1_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_HRTIM1_CLK_ENABLE();
-    /* USER CODE BEGIN HRTIM1_MspInit 1 */
-
-    /* USER CODE END HRTIM1_MspInit 1 */
-
-  }
-
-}
-
-void HAL_HRTIM_MspPostInit(HRTIM_HandleTypeDef* hhrtim)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(hhrtim->Instance==HRTIM1)
-  {
-    /* USER CODE BEGIN HRTIM1_MspPostInit 0 */
-
-    /* USER CODE END HRTIM1_MspPostInit 0 */
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**HRTIM1 GPIO Configuration
-    PA8     ------> HRTIM1_CHA1
-    PA9     ------> HRTIM1_CHA2
-    PA10     ------> HRTIM1_CHB1
-    PA11     ------> HRTIM1_CHB2
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF13_HRTIM1;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN HRTIM1_MspPostInit 1 */
-
-    /* USER CODE END HRTIM1_MspPostInit 1 */
-  }
-
-}
-/**
-  * @brief HRTIM MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param hhrtim: HRTIM handle pointer
-  * @retval None
-  */
-void HAL_HRTIM_MspDeInit(HRTIM_HandleTypeDef* hhrtim)
-{
-  if(hhrtim->Instance==HRTIM1)
-  {
-    /* USER CODE BEGIN HRTIM1_MspDeInit 0 */
-
-    /* USER CODE END HRTIM1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_HRTIM1_CLK_DISABLE();
-    /* USER CODE BEGIN HRTIM1_MspDeInit 1 */
-
-    /* USER CODE END HRTIM1_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief TIM_Base MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param htim_base: TIM_Base handle pointer
-  * @retval None
-  */
-void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
-{
-  if(htim_base->Instance==TIM1)
-  {
-    /* USER CODE BEGIN TIM1_MspInit 0 */
-
-    /* USER CODE END TIM1_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_TIM1_CLK_ENABLE();
-    /* USER CODE BEGIN TIM1_MspInit 1 */
-
-    /* USER CODE END TIM1_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief TIM_Base MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param htim_base: TIM_Base handle pointer
-  * @retval None
-  */
-void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
-{
-  if(htim_base->Instance==TIM1)
-  {
-    /* USER CODE BEGIN TIM1_MspDeInit 0 */
-
-    /* USER CODE END TIM1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM1_CLK_DISABLE();
-    /* USER CODE BEGIN TIM1_MspDeInit 1 */
-
-    /* USER CODE END TIM1_MspDeInit 1 */
-  }
-
-}
-
-/**
-  * @brief UART MSP Initialization
-  * This function configures the hardware resources used in this example
-  * @param huart: UART handle pointer
-  * @retval None
-  */
-void HAL_UART_MspInit(UART_HandleTypeDef* huart)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-  if(huart->Instance==USART1)
-  {
-    /* USER CODE BEGIN USART1_MspInit 0 */
-
-    /* USER CODE END USART1_MspInit 0 */
-
-  /** Initializes the peripherals clocks
-  */
-    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1;
-    PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
-    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
-    {
-      Error_Handler();
-    }
-
-    /* Peripheral clock enable */
-    __HAL_RCC_USART1_CLK_ENABLE();
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART1 GPIO Configuration
-    PB6     ------> USART1_TX
-    PB7     ------> USART1_RX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-    /* USER CODE BEGIN USART1_MspInit 1 */
-
-    /* USER CODE END USART1_MspInit 1 */
-
-  }
-
-}
-
-/**
-  * @brief UART MSP De-Initialization
-  * This function freeze the hardware resources used in this example
-  * @param huart: UART handle pointer
-  * @retval None
-  */
-void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
-{
-  if(huart->Instance==USART1)
-  {
-    /* USER CODE BEGIN USART1_MspDeInit 0 */
-
-    /* USER CODE END USART1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_USART1_CLK_DISABLE();
-
-    /**USART1 GPIO Configuration
-    PB6     ------> USART1_TX
-    PB7     ------> USART1_RX
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
-
-    /* USER CODE BEGIN USART1_MspDeInit 1 */
-
-    /* USER CODE END USART1_MspDeInit 1 */
-  }
-
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */

code/Core/Src/stm32g4xx_it.c

@@ -1,203 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32g4xx_it.c
-  * @brief   Interrupt Service Routines.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2025 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "stm32g4xx_it.h"
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* External variables --------------------------------------------------------*/
-
-/* USER CODE BEGIN EV */
-
-/* USER CODE END EV */
-
-/******************************************************************************/
-/*           Cortex-M4 Processor Interruption and Exception Handlers          */
-/******************************************************************************/
-/**
-  * @brief This function handles Non maskable interrupt.
-  */
-void NMI_Handler(void)
-{
-  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
-
-  /* USER CODE END NonMaskableInt_IRQn 0 */
-  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
-   while (1)
-  {
-  }
-  /* USER CODE END NonMaskableInt_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Hard fault interrupt.
-  */
-void HardFault_Handler(void)
-{
-  /* USER CODE BEGIN HardFault_IRQn 0 */
-
-  /* USER CODE END HardFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
-    /* USER CODE END W1_HardFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Memory management fault.
-  */
-void MemManage_Handler(void)
-{
-  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
-
-  /* USER CODE END MemoryManagement_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
-    /* USER CODE END W1_MemoryManagement_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Prefetch fault, memory access fault.
-  */
-void BusFault_Handler(void)
-{
-  /* USER CODE BEGIN BusFault_IRQn 0 */
-
-  /* USER CODE END BusFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
-    /* USER CODE END W1_BusFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Undefined instruction or illegal state.
-  */
-void UsageFault_Handler(void)
-{
-  /* USER CODE BEGIN UsageFault_IRQn 0 */
-
-  /* USER CODE END UsageFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
-    /* USER CODE END W1_UsageFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles System service call via SWI instruction.
-  */
-void SVC_Handler(void)
-{
-  /* USER CODE BEGIN SVCall_IRQn 0 */
-
-  /* USER CODE END SVCall_IRQn 0 */
-  /* USER CODE BEGIN SVCall_IRQn 1 */
-
-  /* USER CODE END SVCall_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Debug monitor.
-  */
-void DebugMon_Handler(void)
-{
-  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
-
-  /* USER CODE END DebugMonitor_IRQn 0 */
-  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
-
-  /* USER CODE END DebugMonitor_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Pendable request for system service.
-  */
-void PendSV_Handler(void)
-{
-  /* USER CODE BEGIN PendSV_IRQn 0 */
-
-  /* USER CODE END PendSV_IRQn 0 */
-  /* USER CODE BEGIN PendSV_IRQn 1 */
-
-  /* USER CODE END PendSV_IRQn 1 */
-}
-
-/**
-  * @brief This function handles System tick timer.
-  */
-void SysTick_Handler(void)
-{
-  /* USER CODE BEGIN SysTick_IRQn 0 */
-
-  /* USER CODE END SysTick_IRQn 0 */
-  HAL_IncTick();
-  /* USER CODE BEGIN SysTick_IRQn 1 */
-
-  /* USER CODE END SysTick_IRQn 1 */
-}
-
-/******************************************************************************/
-/* STM32G4xx Peripheral Interrupt Handlers                                    */
-/* Add here the Interrupt Handlers for the used peripherals.                  */
-/* For the available peripheral interrupt handler names,                      */
-/* please refer to the startup file (startup_stm32g4xx.s).                    */
-/******************************************************************************/
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */

code/Core/Src/syscalls.c

@@ -1,176 +0,0 @@
-/**
- ******************************************************************************
- * @file      syscalls.c
- * @author    Auto-generated by STM32CubeIDE
- * @brief     STM32CubeIDE Minimal System calls file
- *
- *            For more information about which c-functions
- *            need which of these lowlevel functions
- *            please consult the Newlib libc-manual
- ******************************************************************************
- * @attention
- *
- * Copyright (c) 2020-2025 STMicroelectronics.
- * All rights reserved.
- *
- * This software is licensed under terms that can be found in the LICENSE file
- * in the root directory of this software component.
- * If no LICENSE file comes with this software, it is provided AS-IS.
- *
- ******************************************************************************
- */
-
-/* Includes */
-#include <sys/stat.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <stdio.h>
-#include <signal.h>
-#include <time.h>
-#include <sys/time.h>
-#include <sys/times.h>
-
-
-/* Variables */
-extern int __io_putchar(int ch) __attribute__((weak));
-extern int __io_getchar(void) __attribute__((weak));
-
-
-char *__env[1] = { 0 };
-char **environ = __env;
-
-
-/* Functions */
-void initialise_monitor_handles()
-{
-}
-
-int _getpid(void)
-{
-  return 1;
-}
-
-int _kill(int pid, int sig)
-{
-  (void)pid;
-  (void)sig;
-  errno = EINVAL;
-  return -1;
-}
-
-void _exit (int status)
-{
-  _kill(status, -1);
-  while (1) {}    /* Make sure we hang here */
-}
-
-__attribute__((weak)) int _read(int file, char *ptr, int len)
-{
-  (void)file;
-  int DataIdx;
-
-  for (DataIdx = 0; DataIdx < len; DataIdx++)
-  {
-    *ptr++ = __io_getchar();
-  }
-
-  return len;
-}
-
-__attribute__((weak)) int _write(int file, char *ptr, int len)
-{
-  (void)file;
-  int DataIdx;
-
-  for (DataIdx = 0; DataIdx < len; DataIdx++)
-  {
-    __io_putchar(*ptr++);
-  }
-  return len;
-}
-
-int _close(int file)
-{
-  (void)file;
-  return -1;
-}
-
-
-int _fstat(int file, struct stat *st)
-{
-  (void)file;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-int _isatty(int file)
-{
-  (void)file;
-  return 1;
-}
-
-int _lseek(int file, int ptr, int dir)
-{
-  (void)file;
-  (void)ptr;
-  (void)dir;
-  return 0;
-}
-
-int _open(char *path, int flags, ...)
-{
-  (void)path;
-  (void)flags;
-  /* Pretend like we always fail */
-  return -1;
-}
-
-int _wait(int *status)
-{
-  (void)status;
-  errno = ECHILD;
-  return -1;
-}
-
-int _unlink(char *name)
-{
-  (void)name;
-  errno = ENOENT;
-  return -1;
-}
-
-int _times(struct tms *buf)
-{
-  (void)buf;
-  return -1;
-}
-
-int _stat(char *file, struct stat *st)
-{
-  (void)file;
-  st->st_mode = S_IFCHR;
-  return 0;
-}
-
-int _link(char *old, char *new)
-{
-  (void)old;
-  (void)new;
-  errno = EMLINK;
-  return -1;
-}
-
-int _fork(void)
-{
-  errno = EAGAIN;
-  return -1;
-}
-
-int _execve(char *name, char **argv, char **env)
-{
-  (void)name;
-  (void)argv;
-  (void)env;
-  errno = ENOMEM;
-  return -1;
-}

code/Core/Src/sysmem.c

@@ -1,79 +0,0 @@
-/**
- ******************************************************************************
- * @file      sysmem.c
- * @author    Generated by STM32CubeIDE
- * @brief     STM32CubeIDE System Memory calls file
- *
- *            For more information about which C functions
- *            need which of these lowlevel functions
- *            please consult the newlib libc manual
- ******************************************************************************
- * @attention
- *
- * Copyright (c) 2025 STMicroelectronics.
- * All rights reserved.
- *
- * This software is licensed under terms that can be found in the LICENSE file
- * in the root directory of this software component.
- * If no LICENSE file comes with this software, it is provided AS-IS.
- *
- ******************************************************************************
- */
-
-/* Includes */
-#include <errno.h>
-#include <stdint.h>
-
-/**
- * Pointer to the current high watermark of the heap usage
- */
-static uint8_t *__sbrk_heap_end = NULL;
-
-/**
- * @brief _sbrk() allocates memory to the newlib heap and is used by malloc
- *        and others from the C library
- *
- * @verbatim
- * ############################################################################
- * #  .data  #  .bss  #       newlib heap       #          MSP stack          #
- * #         #        #                         # Reserved by _Min_Stack_Size #
- * ############################################################################
- * ^-- RAM start      ^-- _end                             _estack, RAM end --^
- * @endverbatim
- *
- * This implementation starts allocating at the '_end' linker symbol
- * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
- * The implementation considers '_estack' linker symbol to be RAM end
- * NOTE: If the MSP stack, at any point during execution, grows larger than the
- * reserved size, please increase the '_Min_Stack_Size'.
- *
- * @param incr Memory size
- * @return Pointer to allocated memory
- */
-void *_sbrk(ptrdiff_t incr)
-{
-  extern uint8_t _end; /* Symbol defined in the linker script */
-  extern uint8_t _estack; /* Symbol defined in the linker script */
-  extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
-  const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
-  const uint8_t *max_heap = (uint8_t *)stack_limit;
-  uint8_t *prev_heap_end;
-
-  /* Initialize heap end at first call */
-  if (NULL == __sbrk_heap_end)
-  {
-    __sbrk_heap_end = &_end;
-  }
-
-  /* Protect heap from growing into the reserved MSP stack */
-  if (__sbrk_heap_end + incr > max_heap)
-  {
-    errno = ENOMEM;
-    return (void *)-1;
-  }
-
-  prev_heap_end = __sbrk_heap_end;
-  __sbrk_heap_end += incr;
-
-  return (void *)prev_heap_end;
-}

code/Core/Src/system_stm32g4xx.c

@@ -1,285 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32g4xx.c
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
-  *
-  *   This file provides two functions and one global variable to be called from
-  *   user application:
-  *      - SystemInit(): This function is called at startup just after reset and
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32g4xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick
-  *                                  timer or configure other parameters.
-  *
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  *   After each device reset the HSI (16 MHz) is used as system clock source.
-  *   Then SystemInit() function is called, in "startup_stm32g4xx.s" file, to
-  *   configure the system clock before to branch to main program.
-  *
-  *   This file configures the system clock as follows:
-  *=============================================================================
-  *-----------------------------------------------------------------------------
-  *        System Clock source                    | HSI
-  *-----------------------------------------------------------------------------
-  *        SYSCLK(Hz)                             | 16000000
-  *-----------------------------------------------------------------------------
-  *        HCLK(Hz)                               | 16000000
-  *-----------------------------------------------------------------------------
-  *        AHB Prescaler                          | 1
-  *-----------------------------------------------------------------------------
-  *        APB1 Prescaler                         | 1
-  *-----------------------------------------------------------------------------
-  *        APB2 Prescaler                         | 1
-  *-----------------------------------------------------------------------------
-  *        PLL_M                                  | 1
-  *-----------------------------------------------------------------------------
-  *        PLL_N                                  | 16
-  *-----------------------------------------------------------------------------
-  *        PLL_P                                  | 7
-  *-----------------------------------------------------------------------------
-  *        PLL_Q                                  | 2
-  *-----------------------------------------------------------------------------
-  *        PLL_R                                  | 2
-  *-----------------------------------------------------------------------------
-  *        Require 48MHz for RNG                  | Disabled
-  *-----------------------------------------------------------------------------
-  *=============================================================================
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32g4xx_system
-  * @{
-  */
-
-/** @addtogroup STM32G4xx_System_Private_Includes
-  * @{
-  */
-
-#include "stm32g4xx.h"
-
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE     24000000U /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    16000000U /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Private_Defines
-  * @{
-  */
-
-/************************* Miscellaneous Configuration ************************/
-/* Note: Following vector table addresses must be defined in line with linker
-         configuration. */
-/*!< Uncomment the following line if you need to relocate the vector table
-     anywhere in Flash or Sram, else the vector table is kept at the automatic
-     remap of boot address selected */
-/* #define USER_VECT_TAB_ADDRESS */
-
-#if defined(USER_VECT_TAB_ADDRESS)
-/*!< Uncomment the following line if you need to relocate your vector Table
-     in Sram else user remap will be done in Flash. */
-/* #define VECT_TAB_SRAM */
-#if defined(VECT_TAB_SRAM)
-#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
-                                                     This value must be a multiple of 0x200. */
-#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
-                                                     This value must be a multiple of 0x200. */
-#else
-#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
-                                                     This value must be a multiple of 0x200. */
-#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
-                                                     This value must be a multiple of 0x200. */
-#endif /* VECT_TAB_SRAM */
-#endif /* USER_VECT_TAB_ADDRESS */
-/******************************************************************************/
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Private_Variables
-  * @{
-  */
-  /* The SystemCoreClock variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-  uint32_t SystemCoreClock = HSI_VALUE;
-
-  const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
-  const uint8_t APBPrescTable[8] =  {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Private_FunctionPrototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system.
-  * @param  None
-  * @retval None
-  */
-
-void SystemInit(void)
-{
-  /* FPU settings ------------------------------------------------------------*/
-  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-    SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2)));  /* set CP10 and CP11 Full Access */
-  #endif
-
-  /* Configure the Vector Table location add offset address ------------------*/
-#if defined(USER_VECT_TAB_ADDRESS)
-  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
-#endif /* USER_VECT_TAB_ADDRESS */
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.
-  *
-  * @note   - The system frequency computed by this function is not the real
-  *           frequency in the chip. It is calculated based on the predefined
-  *           constant and the selected clock source:
-  *
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
-  *
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
-  *
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
-  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
-  *
-  *         (**) HSI_VALUE is a constant defined in stm32g4xx_hal.h file (default value
-  *              16 MHz) but the real value may vary depending on the variations
-  *              in voltage and temperature.
-  *
-  *         (***) HSE_VALUE is a constant defined in stm32g4xx_hal.h file (default value
-  *              24 MHz), user has to ensure that HSE_VALUE is same as the real
-  *              frequency of the crystal used. Otherwise, this function may
-  *              have wrong result.
-  *
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  *
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate(void)
-{
-  uint32_t tmp, pllvco, pllr, pllsource, pllm;
-
-  /* Get SYSCLK source -------------------------------------------------------*/
-  switch (RCC->CFGR & RCC_CFGR_SWS)
-  {
-    case 0x04:  /* HSI used as system clock source */
-      SystemCoreClock = HSI_VALUE;
-      break;
-
-    case 0x08:  /* HSE used as system clock source */
-      SystemCoreClock = HSE_VALUE;
-      break;
-
-    case 0x0C:  /* PLL used as system clock  source */
-      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
-         SYSCLK = PLL_VCO / PLLR
-         */
-      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
-      pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4) + 1U ;
-      if (pllsource == 0x02UL) /* HSI used as PLL clock source */
-      {
-        pllvco = (HSI_VALUE / pllm);
-      }
-      else                   /* HSE used as PLL clock source */
-      {
-        pllvco = (HSE_VALUE / pllm);
-      }
-      pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8);
-      pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25) + 1U) * 2U;
-      SystemCoreClock = pllvco/pllr;
-      break;
-
-    default:
-      break;
-  }
-  /* Compute HCLK clock frequency --------------------------------------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;
-}
-
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-

code/Core/Startup/startup_stm32g474cbtx.s

@@ -1,592 +0,0 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32g474xx.s
-  * @author    MCD Application Team
-  * @brief     STM32G474xx devices vector table GCC toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address,
-  *                - Configure the clock system
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M4 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-	.cpu cortex-m4
-	.fpu softvfp
-	.thumb
-
-.global	g_pfnVectors
-.global	Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word	_sidata
-/* start address for the .data section. defined in linker script */
-.word	_sdata
-/* end address for the .data section. defined in linker script */
-.word	_edata
-/* start address for the .bss section. defined in linker script */
-.word	_sbss
-/* end address for the .bss section. defined in linker script */
-.word	_ebss
-
-.equ  BootRAM,        0xF1E0F85F
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called.
- * @param  None
- * @retval : None
-*/
-
-    .section	.text.Reset_Handler
-	.weak	Reset_Handler
-	.type	Reset_Handler, %function
-Reset_Handler:
-  ldr   r0, =_estack
-  mov   sp, r0          /* set stack pointer */
-
-/* Call the clock system initialization function.*/
-    bl  SystemInit
-
-/* Copy the data segment initializers from flash to SRAM */
-  ldr r0, =_sdata
-  ldr r1, =_edata
-  ldr r2, =_sidata
-  movs r3, #0
-  b	LoopCopyDataInit
-
-CopyDataInit:
-  ldr r4, [r2, r3]
-  str r4, [r0, r3]
-  adds r3, r3, #4
-
-LoopCopyDataInit:
-  adds r4, r0, r3
-  cmp r4, r1
-  bcc CopyDataInit
-  
-/* Zero fill the bss segment. */
-  ldr r2, =_sbss
-  ldr r4, =_ebss
-  movs r3, #0
-  b LoopFillZerobss
-
-FillZerobss:
-  str  r3, [r2]
-  adds r2, r2, #4
-
-LoopFillZerobss:
-  cmp r2, r4
-  bcc FillZerobss
-
-/* Call static constructors */
-    bl __libc_init_array
-/* Call the application's entry point.*/
-	bl	main
-
-LoopForever:
-    b LoopForever
-
-.size	Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section	.text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-	b	Infinite_Loop
-	.size	Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex-M4.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- 	.section	.isr_vector,"a",%progbits
-	.type	g_pfnVectors, %object
-
-
-g_pfnVectors:
-	.word	_estack
-	.word	Reset_Handler
-	.word	NMI_Handler
-	.word	HardFault_Handler
-	.word	MemManage_Handler
-	.word	BusFault_Handler
-	.word	UsageFault_Handler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	SVC_Handler
-	.word	DebugMon_Handler
-	.word	0
-	.word	PendSV_Handler
-	.word	SysTick_Handler
-	.word	WWDG_IRQHandler
-	.word	PVD_PVM_IRQHandler
-	.word	RTC_TAMP_LSECSS_IRQHandler
-	.word	RTC_WKUP_IRQHandler
-	.word	FLASH_IRQHandler
-	.word	RCC_IRQHandler
-	.word	EXTI0_IRQHandler
-	.word	EXTI1_IRQHandler
-	.word	EXTI2_IRQHandler
-	.word	EXTI3_IRQHandler
-	.word	EXTI4_IRQHandler
-	.word	DMA1_Channel1_IRQHandler
-	.word	DMA1_Channel2_IRQHandler
-	.word	DMA1_Channel3_IRQHandler
-	.word	DMA1_Channel4_IRQHandler
-	.word	DMA1_Channel5_IRQHandler
-	.word	DMA1_Channel6_IRQHandler
-	.word	DMA1_Channel7_IRQHandler
-	.word	ADC1_2_IRQHandler
-	.word	USB_HP_IRQHandler
-	.word	USB_LP_IRQHandler
-	.word	FDCAN1_IT0_IRQHandler
-	.word	FDCAN1_IT1_IRQHandler
-	.word	EXTI9_5_IRQHandler
-	.word	TIM1_BRK_TIM15_IRQHandler
-	.word	TIM1_UP_TIM16_IRQHandler
-	.word	TIM1_TRG_COM_TIM17_IRQHandler
-	.word	TIM1_CC_IRQHandler
-	.word	TIM2_IRQHandler
-	.word	TIM3_IRQHandler
-	.word	TIM4_IRQHandler
-	.word	I2C1_EV_IRQHandler
-	.word	I2C1_ER_IRQHandler
-	.word	I2C2_EV_IRQHandler
-	.word	I2C2_ER_IRQHandler
-	.word	SPI1_IRQHandler
-	.word	SPI2_IRQHandler
-	.word	USART1_IRQHandler
-	.word	USART2_IRQHandler
-	.word	USART3_IRQHandler
-	.word	EXTI15_10_IRQHandler
-	.word	RTC_Alarm_IRQHandler
-	.word	USBWakeUp_IRQHandler
-	.word	TIM8_BRK_IRQHandler
-	.word	TIM8_UP_IRQHandler
-	.word	TIM8_TRG_COM_IRQHandler
-	.word	TIM8_CC_IRQHandler
-	.word	ADC3_IRQHandler
-	.word	FMC_IRQHandler
-	.word	LPTIM1_IRQHandler
-	.word	TIM5_IRQHandler
-	.word	SPI3_IRQHandler
-	.word	UART4_IRQHandler
-	.word	UART5_IRQHandler
-	.word	TIM6_DAC_IRQHandler
-	.word	TIM7_DAC_IRQHandler
-	.word	DMA2_Channel1_IRQHandler
-	.word	DMA2_Channel2_IRQHandler
-	.word	DMA2_Channel3_IRQHandler
-	.word	DMA2_Channel4_IRQHandler
-	.word	DMA2_Channel5_IRQHandler
-	.word	ADC4_IRQHandler
-	.word	ADC5_IRQHandler
-	.word	UCPD1_IRQHandler
-	.word	COMP1_2_3_IRQHandler
-	.word	COMP4_5_6_IRQHandler
-	.word	COMP7_IRQHandler
-	.word	HRTIM1_Master_IRQHandler
-	.word	HRTIM1_TIMA_IRQHandler
-	.word	HRTIM1_TIMB_IRQHandler
-	.word	HRTIM1_TIMC_IRQHandler
-	.word	HRTIM1_TIMD_IRQHandler
-	.word	HRTIM1_TIME_IRQHandler
-	.word	HRTIM1_FLT_IRQHandler
-	.word	HRTIM1_TIMF_IRQHandler
-	.word	CRS_IRQHandler
-	.word	SAI1_IRQHandler
-	.word	TIM20_BRK_IRQHandler
-	.word	TIM20_UP_IRQHandler
-	.word	TIM20_TRG_COM_IRQHandler
-	.word	TIM20_CC_IRQHandler
-	.word	FPU_IRQHandler
-	.word	I2C4_EV_IRQHandler
-	.word	I2C4_ER_IRQHandler
-	.word	SPI4_IRQHandler
-	.word	0
-	.word	FDCAN2_IT0_IRQHandler
-	.word	FDCAN2_IT1_IRQHandler
-	.word	FDCAN3_IT0_IRQHandler
-	.word	FDCAN3_IT1_IRQHandler
-	.word	RNG_IRQHandler
-	.word	LPUART1_IRQHandler
-	.word	I2C3_EV_IRQHandler
-	.word	I2C3_ER_IRQHandler
-	.word	DMAMUX_OVR_IRQHandler
-	.word	QUADSPI_IRQHandler
-	.word	DMA1_Channel8_IRQHandler
-	.word	DMA2_Channel6_IRQHandler
-	.word	DMA2_Channel7_IRQHandler
-	.word	DMA2_Channel8_IRQHandler
-	.word	CORDIC_IRQHandler
-	.word	FMAC_IRQHandler
-
-	.size	g_pfnVectors, .-g_pfnVectors
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-	.weak	NMI_Handler
-	.thumb_set NMI_Handler,Default_Handler
-
-	.weak	HardFault_Handler
-	.thumb_set HardFault_Handler,Default_Handler
-
-	.weak	MemManage_Handler
-	.thumb_set MemManage_Handler,Default_Handler
-
-	.weak	BusFault_Handler
-	.thumb_set BusFault_Handler,Default_Handler
-
-	.weak	UsageFault_Handler
-	.thumb_set UsageFault_Handler,Default_Handler
-
-	.weak	SVC_Handler
-	.thumb_set SVC_Handler,Default_Handler
-
-	.weak	DebugMon_Handler
-	.thumb_set DebugMon_Handler,Default_Handler
-
-	.weak	PendSV_Handler
-	.thumb_set PendSV_Handler,Default_Handler
-
-	.weak	SysTick_Handler
-	.thumb_set SysTick_Handler,Default_Handler
-
-	.weak	WWDG_IRQHandler
-	.thumb_set WWDG_IRQHandler,Default_Handler
-
-	.weak	PVD_PVM_IRQHandler
-	.thumb_set PVD_PVM_IRQHandler,Default_Handler
-
-	.weak	RTC_TAMP_LSECSS_IRQHandler
-	.thumb_set RTC_TAMP_LSECSS_IRQHandler,Default_Handler
-
-	.weak	RTC_WKUP_IRQHandler
-	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
-	.weak	FLASH_IRQHandler
-	.thumb_set FLASH_IRQHandler,Default_Handler
-
-	.weak	RCC_IRQHandler
-	.thumb_set RCC_IRQHandler,Default_Handler
-
-	.weak	EXTI0_IRQHandler
-	.thumb_set EXTI0_IRQHandler,Default_Handler
-
-	.weak	EXTI1_IRQHandler
-	.thumb_set EXTI1_IRQHandler,Default_Handler
-
-	.weak	EXTI2_IRQHandler
-	.thumb_set EXTI2_IRQHandler,Default_Handler
-
-	.weak	EXTI3_IRQHandler
-	.thumb_set EXTI3_IRQHandler,Default_Handler
-
-	.weak	EXTI4_IRQHandler
-	.thumb_set EXTI4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel1_IRQHandler
-	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel2_IRQHandler
-	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel3_IRQHandler
-	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel4_IRQHandler
-	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel5_IRQHandler
-	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel6_IRQHandler
-	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel7_IRQHandler
-	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
-	.weak	ADC1_2_IRQHandler
-	.thumb_set ADC1_2_IRQHandler,Default_Handler
-
-	.weak	USB_HP_IRQHandler
-	.thumb_set USB_HP_IRQHandler,Default_Handler
-
-	.weak	USB_LP_IRQHandler
-	.thumb_set USB_LP_IRQHandler,Default_Handler
-
-	.weak	FDCAN1_IT0_IRQHandler
-	.thumb_set FDCAN1_IT0_IRQHandler,Default_Handler
-
-	.weak	FDCAN1_IT1_IRQHandler
-	.thumb_set FDCAN1_IT1_IRQHandler,Default_Handler
-
-	.weak	EXTI9_5_IRQHandler
-	.thumb_set EXTI9_5_IRQHandler,Default_Handler
-
-	.weak	TIM1_BRK_TIM15_IRQHandler
-	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
-	.weak	TIM1_UP_TIM16_IRQHandler
-	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
-	.weak	TIM1_TRG_COM_TIM17_IRQHandler
-	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
-	.weak	TIM1_CC_IRQHandler
-	.thumb_set TIM1_CC_IRQHandler,Default_Handler
-
-	.weak	TIM2_IRQHandler
-	.thumb_set TIM2_IRQHandler,Default_Handler
-
-	.weak	TIM3_IRQHandler
-	.thumb_set TIM3_IRQHandler,Default_Handler
-
-	.weak	TIM4_IRQHandler
-	.thumb_set TIM4_IRQHandler,Default_Handler
-
-	.weak	I2C1_EV_IRQHandler
-	.thumb_set I2C1_EV_IRQHandler,Default_Handler
-
-	.weak	I2C1_ER_IRQHandler
-	.thumb_set I2C1_ER_IRQHandler,Default_Handler
-
-	.weak	I2C2_EV_IRQHandler
-	.thumb_set I2C2_EV_IRQHandler,Default_Handler
-
-	.weak	I2C2_ER_IRQHandler
-	.thumb_set I2C2_ER_IRQHandler,Default_Handler
-
-	.weak	SPI1_IRQHandler
-	.thumb_set SPI1_IRQHandler,Default_Handler
-
-	.weak	SPI2_IRQHandler
-	.thumb_set SPI2_IRQHandler,Default_Handler
-
-	.weak	USART1_IRQHandler
-	.thumb_set USART1_IRQHandler,Default_Handler
-
-	.weak	USART2_IRQHandler
-	.thumb_set USART2_IRQHandler,Default_Handler
-
-	.weak	USART3_IRQHandler
-	.thumb_set USART3_IRQHandler,Default_Handler
-
-	.weak	EXTI15_10_IRQHandler
-	.thumb_set EXTI15_10_IRQHandler,Default_Handler
-
-	.weak	RTC_Alarm_IRQHandler
-	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-	.weak	USBWakeUp_IRQHandler
-	.thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-	.weak	TIM8_BRK_IRQHandler
-	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
-
-	.weak	TIM8_UP_IRQHandler
-	.thumb_set TIM8_UP_IRQHandler,Default_Handler
-
-	.weak	TIM8_TRG_COM_IRQHandler
-	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
-
-	.weak	TIM8_CC_IRQHandler
-	.thumb_set TIM8_CC_IRQHandler,Default_Handler
-
-	.weak	ADC3_IRQHandler
-	.thumb_set ADC3_IRQHandler,Default_Handler
-
-	.weak	FMC_IRQHandler
-	.thumb_set FMC_IRQHandler,Default_Handler
-
-	.weak	LPTIM1_IRQHandler
-	.thumb_set LPTIM1_IRQHandler,Default_Handler
-
-	.weak	TIM5_IRQHandler
-	.thumb_set TIM5_IRQHandler,Default_Handler
-
-	.weak	SPI3_IRQHandler
-	.thumb_set SPI3_IRQHandler,Default_Handler
-
-	.weak	UART4_IRQHandler
-	.thumb_set UART4_IRQHandler,Default_Handler
-
-	.weak	UART5_IRQHandler
-	.thumb_set UART5_IRQHandler,Default_Handler
-
-	.weak	TIM6_DAC_IRQHandler
-	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
-	.weak	TIM7_DAC_IRQHandler
-	.thumb_set TIM7_DAC_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel1_IRQHandler
-	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel2_IRQHandler
-	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel3_IRQHandler
-	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel4_IRQHandler
-	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel5_IRQHandler
-	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
-	.weak	ADC4_IRQHandler
-	.thumb_set ADC4_IRQHandler,Default_Handler
-
-	.weak	ADC5_IRQHandler
-	.thumb_set ADC5_IRQHandler,Default_Handler
-
-	.weak	UCPD1_IRQHandler
-	.thumb_set UCPD1_IRQHandler,Default_Handler
-
-	.weak	COMP1_2_3_IRQHandler
-	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
-
-	.weak	COMP4_5_6_IRQHandler
-	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
-
-	.weak	COMP7_IRQHandler
-	.thumb_set COMP7_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_Master_IRQHandler
-	.thumb_set HRTIM1_Master_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_TIMA_IRQHandler
-	.thumb_set HRTIM1_TIMA_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_TIMB_IRQHandler
-	.thumb_set HRTIM1_TIMB_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_TIMC_IRQHandler
-	.thumb_set HRTIM1_TIMC_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_TIMD_IRQHandler
-	.thumb_set HRTIM1_TIMD_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_TIME_IRQHandler
-	.thumb_set HRTIM1_TIME_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_FLT_IRQHandler
-	.thumb_set HRTIM1_FLT_IRQHandler,Default_Handler
-
-	.weak	HRTIM1_TIMF_IRQHandler
-	.thumb_set HRTIM1_TIMF_IRQHandler,Default_Handler
-
-	.weak	CRS_IRQHandler
-	.thumb_set CRS_IRQHandler,Default_Handler
-
-	.weak	SAI1_IRQHandler
-	.thumb_set SAI1_IRQHandler,Default_Handler
-
-	.weak	TIM20_BRK_IRQHandler
-	.thumb_set TIM20_BRK_IRQHandler,Default_Handler
-
-	.weak	TIM20_UP_IRQHandler
-	.thumb_set TIM20_UP_IRQHandler,Default_Handler
-
-	.weak	TIM20_TRG_COM_IRQHandler
-	.thumb_set TIM20_TRG_COM_IRQHandler,Default_Handler
-
-	.weak	TIM20_CC_IRQHandler
-	.thumb_set TIM20_CC_IRQHandler,Default_Handler
-
-	.weak	FPU_IRQHandler
-	.thumb_set FPU_IRQHandler,Default_Handler
-
-	.weak	I2C4_EV_IRQHandler
-	.thumb_set I2C4_EV_IRQHandler,Default_Handler
-
-	.weak	I2C4_ER_IRQHandler
-	.thumb_set I2C4_ER_IRQHandler,Default_Handler
-
-	.weak	SPI4_IRQHandler
-	.thumb_set SPI4_IRQHandler,Default_Handler
-
-	.weak	FDCAN2_IT0_IRQHandler
-	.thumb_set FDCAN2_IT0_IRQHandler,Default_Handler
-
-	.weak	FDCAN2_IT1_IRQHandler
-	.thumb_set FDCAN2_IT1_IRQHandler,Default_Handler
-
-	.weak	FDCAN3_IT0_IRQHandler
-	.thumb_set FDCAN3_IT0_IRQHandler,Default_Handler
-
-	.weak	FDCAN3_IT1_IRQHandler
-	.thumb_set FDCAN3_IT1_IRQHandler,Default_Handler
-
-	.weak	RNG_IRQHandler
-	.thumb_set RNG_IRQHandler,Default_Handler
-
-	.weak	LPUART1_IRQHandler
-	.thumb_set LPUART1_IRQHandler,Default_Handler
-
-	.weak	I2C3_EV_IRQHandler
-	.thumb_set I2C3_EV_IRQHandler,Default_Handler
-
-	.weak	I2C3_ER_IRQHandler
-	.thumb_set I2C3_ER_IRQHandler,Default_Handler
-
-	.weak	DMAMUX_OVR_IRQHandler
-	.thumb_set DMAMUX_OVR_IRQHandler,Default_Handler
-
-	.weak	QUADSPI_IRQHandler
-	.thumb_set QUADSPI_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel8_IRQHandler
-	.thumb_set DMA1_Channel8_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel6_IRQHandler
-	.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel7_IRQHandler
-	.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel8_IRQHandler
-	.thumb_set DMA2_Channel8_IRQHandler,Default_Handler
-
-	.weak	CORDIC_IRQHandler
-	.thumb_set CORDIC_IRQHandler,Default_Handler
-
-	.weak	FMAC_IRQHandler
-	.thumb_set FMAC_IRQHandler,Default_Handler
-

code/Drivers/CMSIS/Device/ST/STM32G4xx/Include/stm32g4xx.h

@@ -1,269 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32g4xx.h
-  * @author  MCD Application Team
-  * @brief   CMSIS STM32G4xx Device Peripheral Access Layer Header File.
-  *
-  *          The file is the unique include file that the application programmer
-  *          is using in the C source code, usually in main.c. This file contains:
-  *           - Configuration section that allows to select:
-  *              - The STM32G4xx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e.
-  *                code will be based on direct access to peripheral’s registers
-  *                rather than drivers API), this option is controlled by
-  *                "#define USE_HAL_DRIVER"
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32g4xx
-  * @{
-  */
-
-#ifndef __STM32G4xx_H
-#define __STM32G4xx_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-
-/** @addtogroup Library_configuration_section
-  * @{
-  */
-
-/**
-  * @brief STM32 Family
-  */
-#if !defined (STM32G4)
-#define STM32G4
-#endif /* STM32G4 */
-
-/* Uncomment the line below according to the target STM32G4 device used in your
-   application
-  */
-
-#if !defined (STM32G431xx) && !defined (STM32G441xx) && !defined (STM32G471xx) && \
-    !defined (STM32G473xx) && !defined (STM32G474xx) && !defined (STM32G484xx) && \
-    !defined (STM32GBK1CB) && !defined (STM32G491xx) && !defined (STM32G4A1xx) && \
-    !defined (STM32G411xB) && !defined (STM32G411xC) && !defined (STM32G414xx)
-  /* #define STM32G411xB */   /*!< STM32G411xB Devices */
-  /* #define STM32G411xC */   /*!< STM32G411xC Devices */
-  /* #define STM32G414xx */   /*!< STM32G414xx Devices */
-  /* #define STM32G431xx */   /*!< STM32G431xx Devices */
-  /* #define STM32G441xx */   /*!< STM32G441xx Devices */
-  /* #define STM32G471xx */   /*!< STM32G471xx Devices */
-  /* #define STM32G473xx */   /*!< STM32G473xx Devices */
-  /* #define STM32G483xx */   /*!< STM32G483xx Devices */
-  /* #define STM32G474xx */   /*!< STM32G474xx Devices */
-  /* #define STM32G484xx */   /*!< STM32G484xx Devices */
-  /* #define STM32G491xx */   /*!< STM32G491xx Devices */
-  /* #define STM32G4A1xx */   /*!< STM32G4A1xx Devices */
-  /* #define STM32GBK1CB */   /*!< STM32GBK1CB Devices */
-#endif
-
-/*  Tip: To avoid modifying this file each time you need to switch between these
-        devices, you can define the device in your toolchain compiler preprocessor.
-  */
-#if !defined  (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
-   In this case, these drivers will not be included and the application code will
-   be based on direct access to peripherals registers
-   */
-  /*#define USE_HAL_DRIVER */
-#endif /* USE_HAL_DRIVER */
-
-/**
-  * @brief CMSIS Device version number V1.2.5
-  */
-#define __STM32G4_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
-#define __STM32G4_CMSIS_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
-#define __STM32G4_CMSIS_VERSION_SUB2   (0x05U) /*!< [15:8]  sub2 version */
-#define __STM32G4_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
-#define __STM32G4_CMSIS_VERSION        ((__STM32G4_CMSIS_VERSION_MAIN << 24)\
-                                       |(__STM32G4_CMSIS_VERSION_SUB1 << 16)\
-                                       |(__STM32G4_CMSIS_VERSION_SUB2 << 8 )\
-                                       |(__STM32G4_CMSIS_VERSION_RC))
-
-/**
-  * @}
-  */
-
-/** @addtogroup Device_Included
-  * @{
-  */
-
-#if defined(STM32G431xx)
-  #include "stm32g431xx.h"
-#elif defined(STM32G441xx)
-  #include "stm32g441xx.h"
-#elif defined(STM32G471xx)
-  #include "stm32g471xx.h"
-#elif defined(STM32G473xx)
-  #include "stm32g473xx.h"
-#elif defined(STM32G483xx)
-  #include "stm32g483xx.h"
-#elif defined(STM32G474xx)
-  #include "stm32g474xx.h"
-#elif defined(STM32G484xx)
-  #include "stm32g484xx.h"
-#elif defined(STM32G491xx)
-  #include "stm32g491xx.h"
-#elif defined(STM32G4A1xx)
-  #include "stm32g4a1xx.h"
-#elif defined(STM32GBK1CB)
-  #include "stm32gbk1cb.h"
-#elif defined(STM32G411xB)
-  #include "stm32g411xb.h"
-#elif defined(STM32G411xC)
-  #include "stm32g411xc.h"
-#elif defined(STM32G414xx)
-  #include "stm32g414xx.h"
-#else
-  #error "Please select first the target STM32G4xx device used in your application (in stm32g4xx.h file)"
-#endif
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_types
-  * @{
-  */
-typedef enum
-{
-  RESET = 0,
-  SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum
-{
-  DISABLE = 0,
-  ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum
-{
-  SUCCESS = 0,
-  ERROR = !SUCCESS
-} ErrorStatus;
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup Exported_macros
-  * @{
-  */
-#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT)    ((REG) & (BIT))
-
-#define CLEAR_REG(REG)        ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
-
-#define READ_REG(REG)         ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
-
-/* Use of CMSIS compiler intrinsics for register exclusive access */
-/* Atomic 32-bit register access macro to set one or several bits */
-#define ATOMIC_SET_BIT(REG, BIT)                             \
-  do {                                                       \
-    uint32_t val;                                            \
-    do {                                                     \
-      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
-    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 32-bit register access macro to clear one or several bits */
-#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
-  do {                                                       \
-    uint32_t val;                                            \
-    do {                                                     \
-      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
-    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 32-bit register access macro to clear and set one or several bits */
-#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
-  do {                                                                     \
-    uint32_t val;                                                          \
-    do {                                                                   \
-      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
-    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
-  } while(0)
-
-/* Atomic 16-bit register access macro to set one or several bits */
-#define ATOMIC_SETH_BIT(REG, BIT)                            \
-  do {                                                       \
-    uint16_t val;                                            \
-    do {                                                     \
-      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
-    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 16-bit register access macro to clear one or several bits */
-#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
-  do {                                                       \
-    uint16_t val;                                            \
-    do {                                                     \
-      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
-    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
-  } while(0)
-
-/* Atomic 16-bit register access macro to clear and set one or several bits */
-#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
-  do {                                                                     \
-    uint16_t val;                                                          \
-    do {                                                                   \
-      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
-    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
-  } while(0)
-
-
-/**
-  * @}
-  */
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32g4xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32G4xx_H */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-
-
-

code/Drivers/CMSIS/Device/ST/STM32G4xx/Include/system_stm32g4xx.h

@@ -1,104 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32g4xx.h
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M4 Device System Source File for STM32G4xx devices.
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.
-  *
-  * This software is licensed under terms that can be found in the LICENSE file
-  * in the root directory of this software component.
-  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32g4xx_system
-  * @{
-  */
-
-/**
-  * @brief Define to prevent recursive inclusion
-  */
-#ifndef __SYSTEM_STM32G4XX_H
-#define __SYSTEM_STM32G4XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup STM32G4xx_System_Includes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup STM32G4xx_System_Exported_Variables
-  * @{
-  */
-  /* The SystemCoreClock variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-extern uint32_t SystemCoreClock;            /*!< System Clock Frequency (Core Clock) */
-
-extern const uint8_t  AHBPrescTable[16];    /*!< AHB prescalers table values */
-extern const uint8_t  APBPrescTable[8];     /*!< APB prescalers table values */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Exported_Constants
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Exported_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32G4xx_System_Exported_Functions
-  * @{
-  */
-
-extern void SystemInit(void);
-extern void SystemCoreClockUpdate(void);
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__SYSTEM_STM32G4XX_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */

code/Drivers/CMSIS/Device/ST/STM32G4xx/LICENSE.txt

@@ -1,6 +0,0 @@
-This software component is provided to you as part of a software package and
-applicable license terms are in the  Package_license file. If you received this
-software component outside of a package or without applicable license terms,
-the terms of the Apache-2.0 license shall apply. 
-You may obtain a copy of the Apache-2.0 at:
-https://opensource.org/licenses/Apache-2.0

code/Drivers/CMSIS/Include/cmsis_armcc.h

@@ -1,894 +0,0 @@
-/**************************************************************************//**
- * @file     cmsis_armcc.h
- * @brief    CMSIS compiler ARMCC (Arm Compiler 5) header file
- * @version  V5.1.0
- * @date     08. May 2019
- ******************************************************************************/
-/*
- * Copyright (c) 2009-2019 Arm Limited. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __CMSIS_ARMCC_H
-#define __CMSIS_ARMCC_H
-
-
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
-  #error "Please use Arm Compiler Toolchain V4.0.677 or later!"
-#endif
-
-/* CMSIS compiler control architecture macros */
-#if ((defined (__TARGET_ARCH_6_M  ) && (__TARGET_ARCH_6_M   == 1)) || \
-     (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M  == 1))   )
-  #define __ARM_ARCH_6M__           1
-#endif
-
-#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M  == 1))
-  #define __ARM_ARCH_7M__           1
-#endif
-
-#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
-  #define __ARM_ARCH_7EM__          1
-#endif
-
-  /* __ARM_ARCH_8M_BASE__  not applicable */
-  /* __ARM_ARCH_8M_MAIN__  not applicable */
-
-/* CMSIS compiler control DSP macros */
-#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
-  #define __ARM_FEATURE_DSP         1
-#endif
-
-/* CMSIS compiler specific defines */
-#ifndef   __ASM
-  #define __ASM                                  __asm
-#endif
-#ifndef   __INLINE
-  #define __INLINE                               __inline
-#endif
-#ifndef   __STATIC_INLINE
-  #define __STATIC_INLINE                        static __inline
-#endif
-#ifndef   __STATIC_FORCEINLINE                 
-  #define __STATIC_FORCEINLINE                   static __forceinline
-#endif           
-#ifndef   __NO_RETURN
-  #define __NO_RETURN                            __declspec(noreturn)
-#endif
-#ifndef   __USED
-  #define __USED                                 __attribute__((used))
-#endif
-#ifndef   __WEAK
-  #define __WEAK                                 __attribute__((weak))
-#endif
-#ifndef   __PACKED
-  #define __PACKED                               __attribute__((packed))
-#endif
-#ifndef   __PACKED_STRUCT
-  #define __PACKED_STRUCT                        __packed struct
-#endif
-#ifndef   __PACKED_UNION
-  #define __PACKED_UNION                         __packed union
-#endif
-#ifndef   __UNALIGNED_UINT32        /* deprecated */
-  #define __UNALIGNED_UINT32(x)                  (*((__packed uint32_t *)(x)))
-#endif
-#ifndef   __UNALIGNED_UINT16_WRITE
-  #define __UNALIGNED_UINT16_WRITE(addr, val)    ((*((__packed uint16_t *)(addr))) = (val))
-#endif
-#ifndef   __UNALIGNED_UINT16_READ
-  #define __UNALIGNED_UINT16_READ(addr)          (*((const __packed uint16_t *)(addr)))
-#endif
-#ifndef   __UNALIGNED_UINT32_WRITE
-  #define __UNALIGNED_UINT32_WRITE(addr, val)    ((*((__packed uint32_t *)(addr))) = (val))
-#endif
-#ifndef   __UNALIGNED_UINT32_READ
-  #define __UNALIGNED_UINT32_READ(addr)          (*((const __packed uint32_t *)(addr)))
-#endif
-#ifndef   __ALIGNED
-  #define __ALIGNED(x)                           __attribute__((aligned(x)))
-#endif
-#ifndef   __RESTRICT
-  #define __RESTRICT                             __restrict
-#endif
-#ifndef   __COMPILER_BARRIER
-  #define __COMPILER_BARRIER()                   __memory_changed()
-#endif
-
-/* #########################  Startup and Lowlevel Init  ######################## */
-
-#ifndef __PROGRAM_START
-#define __PROGRAM_START           __main
-#endif
-
-#ifndef __INITIAL_SP
-#define __INITIAL_SP              Image$$ARM_LIB_STACK$$ZI$$Limit
-#endif
-
-#ifndef __STACK_LIMIT
-#define __STACK_LIMIT             Image$$ARM_LIB_STACK$$ZI$$Base
-#endif
-
-#ifndef __VECTOR_TABLE
-#define __VECTOR_TABLE            __Vectors
-#endif
-
-#ifndef __VECTOR_TABLE_ATTRIBUTE
-#define __VECTOR_TABLE_ATTRIBUTE  __attribute((used, section("RESET")))
-#endif
-
-/* ###########################  Core Function Access  ########################### */
-/** \ingroup  CMSIS_Core_FunctionInterface
-    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
-  @{
- */
-
-/**
-  \brief   Enable IRQ Interrupts
-  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
-           Can only be executed in Privileged modes.
- */
-/* intrinsic void __enable_irq();     */
-
-
-/**
-  \brief   Disable IRQ Interrupts
-  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
-           Can only be executed in Privileged modes.
- */
-/* intrinsic void __disable_irq();    */
-
-/**
-  \brief   Get Control Register
-  \details Returns the content of the Control Register.
-  \return               Control Register value
- */
-__STATIC_INLINE uint32_t __get_CONTROL(void)
-{
-  register uint32_t __regControl         __ASM("control");
-  return(__regControl);
-}
-
-
-/**
-  \brief   Set Control Register
-  \details Writes the given value to the Control Register.
-  \param [in]    control  Control Register value to set
- */
-__STATIC_INLINE void __set_CONTROL(uint32_t control)
-{
-  register uint32_t __regControl         __ASM("control");
-  __regControl = control;
-}
-
-
-/**
-  \brief   Get IPSR Register
-  \details Returns the content of the IPSR Register.
-  \return               IPSR Register value
- */
-__STATIC_INLINE uint32_t __get_IPSR(void)
-{
-  register uint32_t __regIPSR          __ASM("ipsr");
-  return(__regIPSR);
-}
-
-
-/**
-  \brief   Get APSR Register
-  \details Returns the content of the APSR Register.
-  \return               APSR Register value
- */
-__STATIC_INLINE uint32_t __get_APSR(void)
-{
-  register uint32_t __regAPSR          __ASM("apsr");
-  return(__regAPSR);
-}
-
-
-/**
-  \brief   Get xPSR Register
-  \details Returns the content of the xPSR Register.
-  \return               xPSR Register value
- */
-__STATIC_INLINE uint32_t __get_xPSR(void)
-{
-  register uint32_t __regXPSR          __ASM("xpsr");
-  return(__regXPSR);
-}
-
-
-/**
-  \brief   Get Process Stack Pointer
-  \details Returns the current value of the Process Stack Pointer (PSP).
-  \return               PSP Register value
- */
-__STATIC_INLINE uint32_t __get_PSP(void)
-{
-  register uint32_t __regProcessStackPointer  __ASM("psp");
-  return(__regProcessStackPointer);
-}
-
-
-/**
-  \brief   Set Process Stack Pointer
-  \details Assigns the given value to the Process Stack Pointer (PSP).
-  \param [in]    topOfProcStack  Process Stack Pointer value to set
- */
-__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
-{
-  register uint32_t __regProcessStackPointer  __ASM("psp");
-  __regProcessStackPointer = topOfProcStack;
-}
-
-
-/**
-  \brief   Get Main Stack Pointer
-  \details Returns the current value of the Main Stack Pointer (MSP).
-  \return               MSP Register value
- */
-__STATIC_INLINE uint32_t __get_MSP(void)
-{
-  register uint32_t __regMainStackPointer     __ASM("msp");
-  return(__regMainStackPointer);
-}
-
-
-/**
-  \brief   Set Main Stack Pointer
-  \details Assigns the given value to the Main Stack Pointer (MSP).
-  \param [in]    topOfMainStack  Main Stack Pointer value to set
- */
-__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
-{
-  register uint32_t __regMainStackPointer     __ASM("msp");
-  __regMainStackPointer = topOfMainStack;
-}
-
-
-/**
-  \brief   Get Priority Mask
-  \details Returns the current state of the priority mask bit from the Priority Mask Register.
-  \return               Priority Mask value
- */
-__STATIC_INLINE uint32_t __get_PRIMASK(void)
-{
-  register uint32_t __regPriMask         __ASM("primask");
-  return(__regPriMask);
-}
-
-
-/**
-  \brief   Set Priority Mask
-  \details Assigns the given value to the Priority Mask Register.
-  \param [in]    priMask  Priority Mask
- */
-__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
-{
-  register uint32_t __regPriMask         __ASM("primask");
-  __regPriMask = (priMask);
-}
-
-
-#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
-     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
-
-/**
-  \brief   Enable FIQ
-  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
-           Can only be executed in Privileged modes.
- */
-#define __enable_fault_irq                __enable_fiq
-
-
-/**
-  \brief   Disable FIQ
-  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
-           Can only be executed in Privileged modes.
- */
-#define __disable_fault_irq               __disable_fiq
-
-
-/**
-  \brief   Get Base Priority
-  \details Returns the current value of the Base Priority register.
-  \return               Base Priority register value
- */
-__STATIC_INLINE uint32_t  __get_BASEPRI(void)
-{
-  register uint32_t __regBasePri         __ASM("basepri");
-  return(__regBasePri);
-}
-
-
-/**
-  \brief   Set Base Priority
-  \details Assigns the given value to the Base Priority register.
-  \param [in]    basePri  Base Priority value to set
- */
-__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
-{
-  register uint32_t __regBasePri         __ASM("basepri");
-  __regBasePri = (basePri & 0xFFU);
-}
-
-
-/**
-  \brief   Set Base Priority with condition
-  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
-           or the new value increases the BASEPRI priority level.
-  \param [in]    basePri  Base Priority value to set
- */
-__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
-{
-  register uint32_t __regBasePriMax      __ASM("basepri_max");
-  __regBasePriMax = (basePri & 0xFFU);
-}
-
-
-/**
-  \brief   Get Fault Mask
-  \details Returns the current value of the Fault Mask register.
-  \return               Fault Mask register value
- */
-__STATIC_INLINE uint32_t __get_FAULTMASK(void)
-{
-  register uint32_t __regFaultMask       __ASM("faultmask");
-  return(__regFaultMask);
-}
-
-
-/**
-  \brief   Set Fault Mask
-  \details Assigns the given value to the Fault Mask register.
-  \param [in]    faultMask  Fault Mask value to set
- */
-__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
-  register uint32_t __regFaultMask       __ASM("faultmask");
-  __regFaultMask = (faultMask & (uint32_t)1U);
-}
-
-#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
-           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
-
-
-/**
-  \brief   Get FPSCR
-  \details Returns the current value of the Floating Point Status/Control register.
-  \return               Floating Point Status/Control register value
- */
-__STATIC_INLINE uint32_t __get_FPSCR(void)
-{
-#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
-     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
-  register uint32_t __regfpscr         __ASM("fpscr");
-  return(__regfpscr);
-#else
-   return(0U);
-#endif
-}
-
-
-/**
-  \brief   Set FPSCR
-  \details Assigns the given value to the Floating Point Status/Control register.
-  \param [in]    fpscr  Floating Point Status/Control value to set
- */
-__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
-     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
-  register uint32_t __regfpscr         __ASM("fpscr");
-  __regfpscr = (fpscr);
-#else
-  (void)fpscr;
-#endif
-}
-
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-
-/* ##########################  Core Instruction Access  ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
-  Access to dedicated instructions
-  @{
-*/
-
-/**
-  \brief   No Operation
-  \details No Operation does nothing. This instruction can be used for code alignment purposes.
- */
-#define __NOP                             __nop
-
-
-/**
-  \brief   Wait For Interrupt
-  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
- */
-#define __WFI                             __wfi
-
-
-/**
-  \brief   Wait For Event
-  \details Wait For Event is a hint instruction that permits the processor to enter
-           a low-power state until one of a number of events occurs.
- */
-#define __WFE                             __wfe
-
-
-/**
-  \brief   Send Event
-  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
- */
-#define __SEV                             __sev
-
-
-/**
-  \brief   Instruction Synchronization Barrier
-  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
-           so that all instructions following the ISB are fetched from cache or memory,
-           after the instruction has been completed.
- */
-#define __ISB() do {\
-                   __schedule_barrier();\
-                   __isb(0xF);\
-                   __schedule_barrier();\
-                } while (0U)
-
-/**
-  \brief   Data Synchronization Barrier
-  \details Acts as a special kind of Data Memory Barrier.
-           It completes when all explicit memory accesses before this instruction complete.
- */
-#define __DSB() do {\
-                   __schedule_barrier();\
-                   __dsb(0xF);\
-                   __schedule_barrier();\
-                } while (0U)
-
-/**
-  \brief   Data Memory Barrier
-  \details Ensures the apparent order of the explicit memory operations before
-           and after the instruction, without ensuring their completion.
- */
-#define __DMB() do {\
-                   __schedule_barrier();\
-                   __dmb(0xF);\
-                   __schedule_barrier();\
-                } while (0U)
-
-                  
-/**
-  \brief   Reverse byte order (32 bit)
-  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
-  \param [in]    value  Value to reverse
-  \return               Reversed value
- */
-#define __REV                             __rev
-
-
-/**
-  \brief   Reverse byte order (16 bit)
-  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
-  \param [in]    value  Value to reverse
-  \return               Reversed value
- */
-#ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
-{
-  rev16 r0, r0
-  bx lr
-}
-#endif
-
-
-/**
-  \brief   Reverse byte order (16 bit)
-  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
-  \param [in]    value  Value to reverse
-  \return               Reversed value
- */
-#ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
-{
-  revsh r0, r0
-  bx lr
-}
-#endif
-
-
-/**
-  \brief   Rotate Right in unsigned value (32 bit)
-  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
-  \param [in]    op1  Value to rotate
-  \param [in]    op2  Number of Bits to rotate
-  \return               Rotated value
- */
-#define __ROR                             __ror
-
-
-/**
-  \brief   Breakpoint
-  \details Causes the processor to enter Debug state.
-           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
-  \param [in]    value  is ignored by the processor.
-                 If required, a debugger can use it to store additional information about the breakpoint.
- */
-#define __BKPT(value)                       __breakpoint(value)
-
-
-/**
-  \brief   Reverse bit order of value
-  \details Reverses the bit order of the given value.
-  \param [in]    value  Value to reverse
-  \return               Reversed value
- */
-#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
-     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
-  #define __RBIT                          __rbit
-#else
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
-{
-  uint32_t result;
-  uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
-
-  result = value;                      /* r will be reversed bits of v; first get LSB of v */
-  for (value >>= 1U; value != 0U; value >>= 1U)
-  {
-    result <<= 1U;
-    result |= value & 1U;
-    s--;
-  }
-  result <<= s;                        /* shift when v's highest bits are zero */
-  return result;
-}
-#endif
-
-
-/**
-  \brief   Count leading zeros
-  \details Counts the number of leading zeros of a data value.
-  \param [in]  value  Value to count the leading zeros
-  \return             number of leading zeros in value
- */
-#define __CLZ                             __clz
-
-
-#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
-     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
-
-/**
-  \brief   LDR Exclusive (8 bit)
-  \details Executes a exclusive LDR instruction for 8 bit value.
-  \param [in]    ptr  Pointer to data
-  \return             value of type uint8_t at (*ptr)
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
-  #define __LDREXB(ptr)                                                        ((uint8_t ) __ldrex(ptr))
-#else
-  #define __LDREXB(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr))  _Pragma("pop")
-#endif
-
-
-/**
-  \brief   LDR Exclusive (16 bit)
-  \details Executes a exclusive LDR instruction for 16 bit values.
-  \param [in]    ptr  Pointer to data
-  \return        value of type uint16_t at (*ptr)
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
-  #define __LDREXH(ptr)                                                        ((uint16_t) __ldrex(ptr))
-#else
-  #define __LDREXH(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr))  _Pragma("pop")
-#endif
-
-
-/**
-  \brief   LDR Exclusive (32 bit)
-  \details Executes a exclusive LDR instruction for 32 bit values.
-  \param [in]    ptr  Pointer to data
-  \return        value of type uint32_t at (*ptr)
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
-  #define __LDREXW(ptr)                                                        ((uint32_t ) __ldrex(ptr))
-#else
-  #define __LDREXW(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr))  _Pragma("pop")
-#endif
-
-
-/**
-  \brief   STR Exclusive (8 bit)
-  \details Executes a exclusive STR instruction for 8 bit values.
-  \param [in]  value  Value to store
-  \param [in]    ptr  Pointer to location
-  \return          0  Function succeeded
-  \return          1  Function failed
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
-  #define __STREXB(value, ptr)                                                 __strex(value, ptr)
-#else
-  #define __STREXB(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
-#endif
-
-
-/**
-  \brief   STR Exclusive (16 bit)
-  \details Executes a exclusive STR instruction for 16 bit values.
-  \param [in]  value  Value to store
-  \param [in]    ptr  Pointer to location
-  \return          0  Function succeeded
-  \return          1  Function failed
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
-  #define __STREXH(value, ptr)                                                 __strex(value, ptr)
-#else
-  #define __STREXH(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
-#endif
-
-
-/**
-  \brief   STR Exclusive (32 bit)
-  \details Executes a exclusive STR instruction for 32 bit values.
-  \param [in]  value  Value to store
-  \param [in]    ptr  Pointer to location
-  \return          0  Function succeeded
-  \return          1  Function failed
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
-  #define __STREXW(value, ptr)                                                 __strex(value, ptr)
-#else
-  #define __STREXW(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
-#endif
-
-
-/**
-  \brief   Remove the exclusive lock
-  \details Removes the exclusive lock which is created by LDREX.
- */
-#define __CLREX                           __clrex
-
-
-/**
-  \brief   Signed Saturate
-  \details Saturates a signed value.
-  \param [in]  value  Value to be saturated
-  \param [in]    sat  Bit position to saturate to (1..32)
-  \return             Saturated value
- */
-#define __SSAT                            __ssat
-
-
-/**
-  \brief   Unsigned Saturate
-  \details Saturates an unsigned value.
-  \param [in]  value  Value to be saturated
-  \param [in]    sat  Bit position to saturate to (0..31)
-  \return             Saturated value
- */
-#define __USAT                            __usat
-
-
-/**
-  \brief   Rotate Right with Extend (32 bit)
-  \details Moves each bit of a bitstring right by one bit.
-           The carry input is shifted in at the left end of the bitstring.
-  \param [in]    value  Value to rotate
-  \return               Rotated value
- */
-#ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
-{
-  rrx r0, r0
-  bx lr
-}
-#endif
-
-
-/**
-  \brief   LDRT Unprivileged (8 bit)
-  \details Executes a Unprivileged LDRT instruction for 8 bit value.
-  \param [in]    ptr  Pointer to data
-  \return             value of type uint8_t at (*ptr)
- */
-#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
-
-
-/**
-  \brief   LDRT Unprivileged (16 bit)
-  \details Executes a Unprivileged LDRT instruction for 16 bit values.
-  \param [in]    ptr  Pointer to data
-  \return        value of type uint16_t at (*ptr)
- */
-#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
-
-
-/**
-  \brief   LDRT Unprivileged (32 bit)
-  \details Executes a Unprivileged LDRT instruction for 32 bit values.
-  \param [in]    ptr  Pointer to data
-  \return        value of type uint32_t at (*ptr)
- */
-#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
-
-
-/**
-  \brief   STRT Unprivileged (8 bit)
-  \details Executes a Unprivileged STRT instruction for 8 bit values.
-  \param [in]  value  Value to store
-  \param [in]    ptr  Pointer to location
- */
-#define __STRBT(value, ptr)               __strt(value, ptr)
-
-
-/**
-  \brief   STRT Unprivileged (16 bit)
-  \details Executes a Unprivileged STRT instruction for 16 bit values.
-  \param [in]  value  Value to store
-  \param [in]    ptr  Pointer to location
- */
-#define __STRHT(value, ptr)               __strt(value, ptr)
-
-
-/**
-  \brief   STRT Unprivileged (32 bit)
-  \details Executes a Unprivileged STRT instruction for 32 bit values.
-  \param [in]  value  Value to store
-  \param [in]    ptr  Pointer to location
- */
-#define __STRT(value, ptr)                __strt(value, ptr)
-
-#else  /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
-           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
-
-/**
-  \brief   Signed Saturate
-  \details Saturates a signed value.
-  \param [in]  value  Value to be saturated
-  \param [in]    sat  Bit position to saturate to (1..32)
-  \return             Saturated value
- */
-__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
-{
-  if ((sat >= 1U) && (sat <= 32U))
-  {
-    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
-    const int32_t min = -1 - max ;
-    if (val > max)
-    {
-      return max;
-    }
-    else if (val < min)
-    {
-      return min;
-    }
-  }
-  return val;
-}
-
-/**
-  \brief   Unsigned Saturate
-  \details Saturates an unsigned value.
-  \param [in]  value  Value to be saturated
-  \param [in]    sat  Bit position to saturate to (0..31)
-  \return             Saturated value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
-{
-  if (sat <= 31U)
-  {
-    const uint32_t max = ((1U << sat) - 1U);
-    if (val > (int32_t)max)
-    {
-      return max;
-    }
-    else if (val < 0)
-    {
-      return 0U;
-    }
-  }
-  return (uint32_t)val;
-}
-
-#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
-           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-
-/* ###################  Compiler specific Intrinsics  ########################### */
-/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
-  Access to dedicated SIMD instructions
-  @{
-*/
-
-#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
-
-#define __SADD8                           __sadd8
-#define __QADD8                           __qadd8
-#define __SHADD8                          __shadd8
-#define __UADD8                           __uadd8
-#define __UQADD8                          __uqadd8
-#define __UHADD8                          __uhadd8
-#define __SSUB8                           __ssub8
-#define __QSUB8                           __qsub8
-#define __SHSUB8                          __shsub8
-#define __USUB8                           __usub8
-#define __UQSUB8                          __uqsub8
-#define __UHSUB8                          __uhsub8
-#define __SADD16                          __sadd16
-#define __QADD16                          __qadd16
-#define __SHADD16                         __shadd16
-#define __UADD16                          __uadd16
-#define __UQADD16                         __uqadd16
-#define __UHADD16                         __uhadd16
-#define __SSUB16                          __ssub16
-#define __QSUB16                          __qsub16
-#define __SHSUB16                         __shsub16
-#define __USUB16                          __usub16
-#define __UQSUB16                         __uqsub16
-#define __UHSUB16                         __uhsub16
-#define __SASX                            __sasx
-#define __QASX                            __qasx
-#define __SHASX                           __shasx
-#define __UASX                            __uasx
-#define __UQASX                           __uqasx
-#define __UHASX                           __uhasx
-#define __SSAX                            __ssax
-#define __QSAX                            __qsax
-#define __SHSAX                           __shsax
-#define __USAX                            __usax
-#define __UQSAX                           __uqsax
-#define __UHSAX                           __uhsax
-#define __USAD8                           __usad8
-#define __USADA8                          __usada8
-#define __SSAT16                          __ssat16
-#define __USAT16                          __usat16
-#define __UXTB16                          __uxtb16
-#define __UXTAB16                         __uxtab16
-#define __SXTB16                          __sxtb16
-#define __SXTAB16                         __sxtab16
-#define __SMUAD                           __smuad
-#define __SMUADX                          __smuadx
-#define __SMLAD                           __smlad
-#define __SMLADX                          __smladx
-#define __SMLALD                          __smlald
-#define __SMLALDX                         __smlaldx
-#define __SMUSD                           __smusd
-#define __SMUSDX                          __smusdx
-#define __SMLSD                           __smlsd
-#define __SMLSDX                          __smlsdx
-#define __SMLSLD                          __smlsld
-#define __SMLSLDX                         __smlsldx
-#define __SEL                             __sel
-#define __QADD                            __qadd
-#define __QSUB                            __qsub
-
-#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
-                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
-
-#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
-                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
-
-#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
-                                                      ((int64_t)(ARG3) << 32U)     ) >> 32U))
-
-#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
-/*@} end of group CMSIS_SIMD_intrinsics */
-
-
-#endif /* __CMSIS_ARMCC_H */