rename config.hardware.dts.includes -> includePaths

(1) it's a better name
(2) I want to use `includes` to specify dtsi files

devices/belkin-rt3200/default.nix

@@ -197,7 +197,7 @@
         rootDevice = "ubi0:liminix";
         dts = {
           src = "${openwrt.src}/target/linux/mediatek/dts/mt7622-linksys-e8450-ubi.dts";
-          includes =  [
+          includePaths =  [
             "${openwrt.src}/target/linux/mediatek/dts"
             "${config.system.outputs.kernel.modulesupport}/arch/arm64/boot/dts/mediatek/"
           ];

devices/gl-ar750/default.nix

@@ -116,7 +116,7 @@
         rootDevice = "/dev/mtdblock5";
         dts = {
           src = "${openwrt.src}/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts";
-          includes =  [
+          includePaths =  [
             "${openwrt.src}/target/linux/ath79/dts"
           ];
         };

devices/gl-mt300a/default.nix

@@ -81,7 +81,7 @@
 
         dts = {
           src = "${openwrt.src}/target/linux/ramips/dts/mt7620a_glinet_gl-mt300a.dts";
-          includes = [
+          includePaths = [
             "${openwrt.src}/target/linux/ramips/dts"
           ];
         };

devices/gl-mt300n-v2/default.nix

@@ -78,7 +78,7 @@
 
         dts = {
           src = "${openwrt.src}/target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts";
-          includes = [
+          includePaths = [
             "${openwrt.src}/target/linux/ramips/dts"
           ];
         };

devices/qemu/default.nix

@@ -66,7 +66,7 @@
         # *correct* but it does at least boot
         dts = lib.mkForce {
           src = "${config.system.outputs.kernel.modulesupport}/arch/mips/boot/dts/mti/malta.dts";
-          includes =  [
+          includePaths =  [
             "${config.system.outputs.kernel.modulesupport}/arch/mips/boot/dts/"
           ];
         };

devices/tp-archer-ax23/default.nix

@@ -410,7 +410,7 @@
           rootDevice = "/dev/mtdblock3";
           dts = {
             src = "${openwrt.src}/target/linux/ramips/dts/mt7621_tplink_archer-ax23-v1.dts";
-            includes =  [
+            includePaths =  [
               "${openwrt.src}/target/linux/ramips/dts"
               "${config.system.outputs.kernel.modulesupport}/arch/arm64/boot/dts/mediatek/"
             ];

devices/turris-omnia/default.nix

@@ -348,7 +348,7 @@
 
           dts = {
             src = "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts";
-            includes =  [
+            includePaths =  [
               "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/marvell/"
             ];
           };

devices/zyxel-nwa50ax/default.nix

@@ -124,7 +124,7 @@
         hash = "sha256-ifriAjWzFACrxVWCANZpUaEZgB/0pdbhnTVQytx6ddg=";
       };
     in {
-      imports = [ 
+      imports = [
         # We include it to ensure the bridge functionality
         # is available on the target kernel.
         ../../modules/bridge
@@ -184,7 +184,7 @@
           # Actually, this is not what we want.
           # This DTS is insufficient.
           src = ./mt7621_zyxel_nwa50ax.dtsi;
-          includes = [
+          includePaths = [
             # Here's one weird trick to make `ubi` detection
             # out of the box.
             # We will write ubi on /dev/firmware_a:rootfs location
@@ -233,7 +233,7 @@
       services.zyxel-dual-image = config.boot.zyxel-dual-image.build {
         ensureActiveImage = "primary";
         # TODO: use mtd names rather…
-        # primary and secondary are always /dev/mtd3 by virtue of the 
+        # primary and secondary are always /dev/mtd3 by virtue of the
         # dtb being not too wrong…
         # TODO: remove this hack.
         primaryMtdPartition = "/dev/mtd3";