# Wedding Phone - Vintage Rotary Phone Audio System

A Raspberry Pi-based rotary phone system for weddings and events. Guests can pick up the handset to hear custom greeting messages and leave voice recordings. Features a modern web interface for managing messages and recordings.

## Features

- **Vintage Phone Integration**: Uses a real rotary phone with GPIO hook detection
- **Custom Greeting Messages**: Upload multiple greeting messages and select which one plays
- **Voice Recording**: Automatically records guest messages after the greeting
- **Web Interface**: Beautiful, responsive web UI for managing the system
- **Audio Playback**: Play recordings and greetings directly in the browser
- **Multiple Message Support**: Upload and manage multiple greeting messages
- **Active Message Selector**: Choose which greeting plays when the phone is picked up
- **HiFiBerry Support**: Optimized for HiFiBerry DAC+ADC Pro audio quality
- **Real-time Status**: Monitor phone status (on-hook/off-hook/recording)
- **Auto-refresh**: Status updates every 5 seconds

## Hardware Requirements

- Raspberry Pi (3/4/5 or Zero 2 W)
- HiFiBerry DAC+ADC Pro (or similar audio interface)
- Vintage rotary phone with hookswitch
- Speaker (connected to HiFiBerry output)
- Microphone (connected to HiFiBerry input, or use phone handset mic)

## Software Requirements

- Raspberry Pi OS (Bullseye or newer)
- Python 3.7+
- Required Python packages:
  - pyaudio
  - flask
  - numpy
  - RPi.GPIO
  - wave (built-in)

## Installation

### 1. Clone the Repository

```bash
git clone https://git.b4l.co.th/grabowski/wedding-phone.git
cd wedding-phone
```

### 2. Install Dependencies

```bash
sudo apt-get update
sudo apt-get install -y python3-pip python3-pyaudio portaudio19-dev
pip3 install flask numpy RPi.GPIO
```

### 3. Configure HiFiBerry

Run the automatic configuration script:

```bash
chmod +x configure_hifiberry.sh
./configure_hifiberry.sh
```

Or follow the manual instructions in `AUDIO_FIX.md`.

### 4. Test Your Audio

```bash
python3 test_complete.py
```

This will test:
- Speaker playback
- Dial tone generation
- Microphone recording

### 5. Configure GPIO Pin

Edit `rotary_phone_web.py` and set your hookswitch GPIO pin:

```python
HOOK_PIN = 17  # Change to your GPIO pin number
HOOK_PRESSED = GPIO.LOW  # Or GPIO.HIGH depending on your switch
```

### 6. Run the System

```bash
python3 rotary_phone_web.py
```

The web interface will be available at:
- `http://localhost:8080`
- `http://<raspberry-pi-ip>:8080`

## Usage

### Web Interface

The web interface provides three main sections:

#### 1. Phone Status
- Shows current phone state (on-hook/off-hook/recording)
- Displays active recording filename
- Auto-refreshes every 5 seconds

#### 2. Greeting Messages
- **Upload**: Click "Choose WAV File(s)" to upload one or multiple greeting messages
- **Play**: Click "▶️ Play" to preview any greeting in your browser
- **Set Active**: Click "⭐ Set Active" to select which greeting plays when the phone is picked up
- **Delete**: Remove unwanted greetings (cannot delete the active one)
- **Default Tone**: Generate a classic telephone dial tone

#### 3. Recordings
- **Play**: Listen to recordings directly in the browser
- **Download**: Save recordings to your computer
- **Delete**: Remove unwanted recordings
- **Statistics**: View total recordings, storage used, and total duration

### Phone Operation

1. **Guest picks up phone**: System detects via GPIO
2. **Greeting plays**: Active greeting message plays through speaker
3. **Recording starts**: After greeting, system records guest message
4. **Guest hangs up**: Recording stops and saves automatically
5. **Ready for next call**: System returns to waiting state

## File Structure

```
wedding-phone/
├── rotary_phone_web.py       # Main application
├── test_complete.py           # Audio testing script
├── configure_hifiberry.sh     # HiFiBerry setup script
├── AUDIO_FIX.md              # Audio configuration guide
├── README.md                  # This file
├── .gitignore                # Git ignore rules
└── templates/                 # Auto-generated on first run
    └── index.html            # Web interface (embedded in script)
```

### Runtime Data (Auto-created)

```
/home/berwn/rotary_phone_data/
├── recordings/               # Voice recordings from guests
├── sounds/                   # Greeting message WAV files
└── config.json              # Active greeting configuration
```

## Configuration

### Audio Settings

Edit these constants in `rotary_phone_web.py`:

```python
CHUNK = 1024              # Audio buffer size
FORMAT = pyaudio.paInt16  # 16-bit audio
CHANNELS = 1              # Mono
RATE = 44100              # 44.1kHz sample rate
RECORD_SECONDS = 300      # Max recording time (5 minutes)
```

### HiFiBerry Device Index

If your HiFiBerry is at a different device index:

```python
# Line ~103 and ~138 in rotary_phone_web.py
output_device_index=1,  # Change this number
input_device_index=1,   # Change this number
```

Find your device index:

```bash
python3 -c "import pyaudio; p=pyaudio.PyAudio(); [print(f'{i}: {p.get_device_info_by_index(i)[\"name\"]}') for i in range(p.get_device_count())]"
```

### Web Server Port

```python
WEB_PORT = 8080  # Change to your preferred port
```

## Troubleshooting

### No Sound from Speaker

1. Check HiFiBerry configuration:
   ```bash
   aplay -l  # List audio devices
   amixer -c 3 sset Digital 100%  # Set volume (adjust card number)
   ```

2. Test speaker directly:
   ```bash
   speaker-test -D plughw:3,0 -c 1 -t wav
   ```

3. Run the complete test:
   ```bash
   python3 test_complete.py
   ```

### Microphone Not Recording

1. Check microphone is connected to HiFiBerry input
2. Adjust input gain:
   ```bash
   alsamixer -c 3
   ```
3. Test recording:
   ```bash
   arecord -D plughw:3,0 -f cd test.wav -d 5
   aplay test.wav
   ```

### GPIO Not Detecting Hookswitch

1. Verify GPIO pin number
2. Check if switch is normally open or closed
3. Test with a simple script:
   ```python
   import RPi.GPIO as GPIO
   GPIO.setmode(GPIO.BCM)
   GPIO.setup(17, GPIO.IN, pull_up_down=GPIO.PUD_UP)
   print(GPIO.input(17))  # Should change when switch toggles
   ```

### Web Interface Not Accessible

1. Check if Flask is running: `ps aux | grep python`
2. Verify firewall: `sudo ufw allow 8080`
3. Check IP address: `hostname -I`
4. Try localhost: `http://127.0.0.1:8080`

## Auto-start on Boot

Create a systemd service:

```bash
sudo nano /etc/systemd/system/wedding-phone.service
```

Add:

```ini
[Unit]
Description=Wedding Phone Service
After=network.target sound.target

[Service]
Type=simple
User=berwn
WorkingDirectory=/home/berwn/wedding-phone
ExecStart=/usr/bin/python3 /home/berwn/wedding-phone/rotary_phone_web.py
Restart=always
RestartSec=10

[Install]
WantedBy=multi-user.target
```

Enable and start:

```bash
sudo systemctl daemon-reload
sudo systemctl enable wedding-phone.service
sudo systemctl start wedding-phone.service
sudo systemctl status wedding-phone.service
```

## API Endpoints

The system provides REST API endpoints:

- `GET /` - Web interface
- `GET /api/status` - Phone status JSON
- `GET /api/recordings` - List all recordings
- `GET /api/greetings` - List all greeting messages
- `POST /upload_greeting` - Upload new greeting
- `POST /set_active_greeting` - Set active greeting
- `POST /delete_greeting/<filename>` - Delete greeting
- `GET /play_audio/<type>/<filename>` - Stream audio file
- `GET /download/<filename>` - Download recording
- `POST /delete/<filename>` - Delete recording
- `POST /restore_default_sound` - Generate default dial tone

## Contributing

Feel free to open issues or submit pull requests for improvements.

## License

This project is open source and available for personal and commercial use.

## Credits

Created for wedding events to capture guest messages in a unique, nostalgic way.

## Support

For issues or questions, please open an issue on the repository.